Multi-Layer Samplers for Powder and Bulk Material
Disposable Multi-Layer Samplers for Powder and Bulk Material
Use this sampler once and then throw away to reduce the risk of cross contamination. Puncture bags of powders and bulk materials with the pointed tip, then twist the handle to collect samples from multiple layers.
| Capacity, ml | Dia. | Lg. | Number of Openings | Each | |
Polyethylene Plastic | |||||
|---|---|---|---|---|---|
| 200 | 1" | 39" | 3 | 0000000 | 000000 |
Sterile Disposable Multi-Layer Samplers for Powder and Bulk Material
This sampler is cleaned and bagged in a Class 7 clean room. Each bag is marked with a lot number. Puncture bags of powders and bulk materials with the pointed tip, then twist the handle to collect samples from multiple layers.
| Capacity, ml | Dia. | Lg. | Number of Openings | Each | |
Polyethylene Plastic | |||||
|---|---|---|---|---|---|
| 200 | 1" | 39" | 3 | 0000000 | 000000 |
Sterile Disposable Samplers for Powder and Bulk Material
Use the pointed blade to pierce bags to collect samples. This sampler is cleaned and bagged in a Class 7 clean room. The bag is marked with a lot number.
| Capacity, ml | Blade Lg. | Overall Lg. | Each | |
Polystyrene Plastic | ||||
|---|---|---|---|---|
| 12 | 6" | 10 1/2" | 0000000 | 00000 |
Samplers for Powder and Bulk Material
Puncture bags with the pointed tip to collect and transfer samples of powder and bulk materials. Made of stainless steel, these reusable samplers resist corrosion and chemicals and are easy to clean and sanitize.
Samplers with an open end are hollow, so you can funnel a sample directly into a container.
Sludge Samplers
Closed
with Sample
Collect and measure buildup from the bottom of oil tanks, septic tanks, wastewater lagoons, and other areas. Unlike other samplers that only hold liquids, these samplers can draw in solids, too. They help you monitor sludge, which is important for maintaining healthy heating systems and meeting environmental regulations for sewage. Not for use with ethanol or ethanol-blended fuel.
Made of a strong plastic, these samplers are rigid enough to push through tough layers of sludge to collect a complete sample. A valve lets in liquids and solids, then blocks them from going out. Samplers are clear and marked with 1-ft. graduations, so you can view and measure what’s inside. Press down on the valve pin to empty.
These samplers consist of three hollow 5-ft. tubes. Screw together as many as you need to match the depth of your tank. Since they’re detachable, they’re easy to transport. Add extensions (sold separately) to make samplers longer.
Powder Scrapers
Break down clumps and scrape stubborn collections of powder from bottle edges and corners. These scrapers have a rounded tip to reach everywhere powder might accumulate. The U-shaped body hugs curved interiors to scoop up powder without spilling it over the sides. They're slim enough to remove samples from narrow-necked containers. Made of stainless steel, these scrapers are durable and corrosion resistant. They also resist chemicals, so they’re easy to sanitize.
Overall | |||||
|---|---|---|---|---|---|
| Tip Wd. | Lg. | Wd. | Flexibility | Each | |
Stainless Steel  | |||||
| 5/16" | 6 1/2" | 5/8" | Rigid | 0000000 | 00000 |
Controlled-Dispensing Lab Spatulas
A thumbwheel on these spatulas creates small vibrations to dispense tiny amounts of liquids or powder. This makes them a great choice to transfer material bit by bit into a weighing dish. Made from stainless steel, these spatulas are corrosion resistant for use with chemicals, as well as easy to clean and sanitize.
Spatulas with a U-shaped blade can fit into narrow openings, such as small bottles. Their raised edges keep samples from falling over the sides of the blade. Instead, samples will funnel down the narrow tip, giving you the greatest control over how much is dispensed.
Spatulas with a curved blade have a slight curve at the tip to keep samples from falling off the end in large quantities. These spatulas lack edges, so they are a great choice when you want to dispense every last speck.
PTFE-coated spatulas let liquid and powder slide easily off the blade. The coating meets FDA requirements for use in direct food contact applications.
Blade | ||||||||
|---|---|---|---|---|---|---|---|---|
| Material | Wd. | Lg. | Lg. | Flexibility | Handle Material | Specifications Met | Each | |
U-Shaped Blade | ||||||||
| Stainless Steel | 1/4" | 3" | 8 1/4" | Rigid | Polystyrene Plastic | __ | 0000000 | 000000 |
| PTFE-Coated Stainless Steel | 1/4" | 3" | 8 1/4" | Rigid | Polystyrene Plastic | FDA Compliant 21 CFR 177.1550 | 0000000 | 00000 |
Curved Blade | ||||||||
| Stainless Steel | 1/2" | 2" | 7" | Rigid | Polystyrene Plastic | __ | 0000000 | 00000 |
| PTFE-Coated Stainless Steel | 1/2" | 2" | 7" | Rigid | Polystyrene Plastic | FDA Compliant 21 CFR 177.1550 | 0000000 | 00000 |