All cords have a country-specific plug on one end and an IEC socket on the other end.

Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.

Power multiple devices from one power source.

Tug these cords to full length, and they’ll stay plugged in. Also called hospital-grade cords, they form an extra-tight connection with outlets. After stretching, they return to a tight, tangle-free coil.

Designed for indoor applications, these cords are often used to power appliances.

These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.

Stop electric shocks before they happen—these cords cut power to equipment when they detect an unsafe current.

Hardwire these cords to equipment.

The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

Designed for indoor use, these cords are often used to power appliances.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

In addition to an outlet on the end, these cords have multiple inline outlets.

Avoid the clutter of multiple extension cords and overcrowded outlet strips—these extension cords have outlet boxes spread evenly along their length.

Keep personnel safe from electric shock with these cords.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.

Keep power flowing in dirty areas with rubber-insulated cords that resist oil, water, and chemicals. A locking lever on the socket prevents your device from disconnecting.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Save energy by automatically turning off unused outlets—the master outlet controls the follower outlets and shuts off power to those outlets when a device plugged into the master is turned off.

Keep personnel safe from electric shock with ground fault protection.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

With a rubber housing, these outlet strips withstand drops and other impact.

Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock.

These curved outlet strips clamp onto a pole or table leg.

No need for mounting hardware—these outlet strips have magnets on the back to stick to steel walls, cabinets, and other magnetic surfaces.

Bring power to workstations that are not near a wall—these poles mount from the ceiling.

Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.

Make power accessible in wet and outdoor environments with these cord reels that resist water, oil, and UV light. A tug on the extension cord winds it up automatically, so you don’t have to wind it yourself.

Use these connectors in general purpose residential and commercial applications.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation and grip the wire securely. Access the wire connection by opening the hinged housing.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded.

Protect computers and other sensitive equipment from electromagnetic interference (EMI). Also known as isolated ground receptacles.

Also known as hospital-grade connectors, these have an extra-tight fit when mated to remain secure in high-vibration environments.

Add a fuse to protect equipment from current overload. When mated with a receptacle, these plugs have an extra-tight fit to remain secure in high vibration environments. They're also known as hospital grade plugs.

A rubber housing protects these connectors from damage caused by drops and impact.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

Also known as twist-lock devices, these connectors withstand tough, repetitive use, and are more durable than standard turn-lock connectors. They turn to lock together when mated to prevent accidental disconnection.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded. They turn to lock together when mated to prevent accidental disconnection.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments. These connectors turn to lock together when mated to prevent accidental disconnection.

A rubber housing protects these connectors from damage caused by drops and impact. They turn to lock together when mated to prevent accidental disconnection.

Connect and disconnect with the power on—spring-loaded contacts open like a switch when separating the connectors, preventing an electrical arc.

Meet international standards IEC 309-1 and 309-2.