Power Locks | McMaster-Carr

Filter by

System of Measurement

Shaft Diameter

Shaft Type

Material

Overall Width

Shaft Mount Type

Width

Maximum Torque

Less than 10,000 in·lbf

10,000 in·lbf to 19,999 in·lbf

20,000 in·lbf to 29,999 in·lbf

30,000 in·lbf to 39,999 in·lbf

40,000 in·lbf or greater

Bushing Type

Length

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

REACH

RoHS

DFARS Specialty Metals

Exempt

Torque

Less than 10,000 in·lbf

10,000 in·lbf to 19,999 in·lbf

20,000 in·lbf to 29,999 in·lbf

30,000 in·lbf to 39,999 in·lbf

40,000 in·lbf or greater

Fastener Tightening Torque

Performance

Finish

Maximum Rotation Speed

Overall Length

Number of Clamping Screws Included

Thread Size

For Rotary Motion

241 Products

Flush-Mount Screw-Clamp Bushings

Insert these bushings into the bore of your sprocket for flush or recessed mounting. They handle shock loads. When you tighten the included clamping screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.

	OD	Overall Wd.	Max. Torque, in·lbf	Fastener Tightening Torque, in·lbf	Includes		Each
Steel



	3/4"	1 7/8"	1 1/32"	2,250	150	Clamping Screws	2328K11	000000


	1"	2"	1 1/32"	3,800	150	Clamping Screws	2328K12	00000
	1 3/16"	2 3/16"	1 1/16"	4,500	150	Clamping Screws	2328K13	00000
	1 1/4"	2 3/8"	1 1/32"	5,950	150	Clamping Screws	2328K14	00000
	1 3/8"	2 3/8"	1 1/64"	6,600	150	Clamping Screws	2328K15	00000
	1 7/16"	2 9/16"	1 1/32"	7,600	150	Clamping Screws	2328K16	00000
	1 1/2"	2 9/16"	1 1/32"	7,850	150	Clamping Screws	2328K17	00000
	1 3/4"	3"	1 17/64"	13,900	360	Clamping Screws	2328K18	000000
	1 15/16"	3 3/16"	1 17/64"	15,400	360	Clamping Screws	2328K19	000000
	24 mm	55 mm	40 mm	6,650	142	Clamping Screws	1070N11	000000
	25 mm	55 mm	40 mm	6,950	142	Clamping Screws	1070N12	000000


	30 mm	55 mm	40 mm	8,350	142	Clamping Screws	1070N13	000000
	32 mm	60 mm	54 mm	10,350	142	Clamping Screws	1070N22	000000
	35 mm	60 mm	54 mm	11,300	142	Clamping Screws	1070N14	000000
	40 mm	75 mm	54 mm	25,500	363	Clamping Screws	1070N15	000000
	45 mm	75 mm	54 mm	28,700	363	Clamping Screws	1070N16	000000
	50 mm	80 mm	66 mm	36,400	363	Clamping Screws	1070N17	000000
	55 mm	85 mm	66 mm	45,100	363	Clamping Screws	1070N18	000000
	60 mm	90 mm	66 mm	54,700	363	Clamping Screws	1070N19	000000

Flanged Screw-Clamp Bushings

A mounting flange prevents movement during tightening. These bushings are good for shock loads. When you tighten the included screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.

	OD	Overall Wd.	Max. Torque, in·lbf	Fastener Tightening Torque, in·lbf	Includes		Each
Steel



	3/8"	15/16"	13/16"	260	42	Clamping Screws	1058K11	000000


	1/2"	1 1/16"	13/16"	460	42	Clamping Screws	1058K12	00000
	5/8"	1 3/16"	31/32"	880	42	Clamping Screws	1058K13	00000
	3/4"	1 5/16"	31/32"	1,050	42	Clamping Screws	1058K14	00000
	1"	1 11/16"	1 3/16"	3,050	90	Clamping Screws	1058K15	00000
	1 1/4"	2"	1 19/64"	4,800	90	Clamping Screws	1058K16	00000
	1 3/8"	2 1/8"	1 19/64"	5,300	90	Clamping Screws	1058K17	00000
	1 7/16"	2 5/16"	1 1/2"	6,250	150	Clamping Screws	1058K18	000000
	1 1/2"	2 3/8"	1 1/2"	8,150	150	Clamping Screws	1058K19	000000
	12 mm	26 mm	21 mm	440	42	Clamping Screws	1058K66	00000
	14 mm	28 mm	24 mm	640	42	Clamping Screws	1058K67	00000


	16 mm	30 mm	24 mm	900	42	Clamping Screws	1058K69	00000
	18 mm	32 mm	24 mm	990	42	Clamping Screws	1058K72	00000
	19 mm	33 mm	24 mm	1,050	42	Clamping Screws	1058K73	00000
	20 mm	38 mm	30 mm	1,800	90	Clamping Screws	1058K74	00000
	22 mm	40 mm	30 mm	2,000	90	Clamping Screws	1058K75	00000
	25 mm	43 mm	30 mm	3,000	90	Clamping Screws	1058K77	00000
	30 mm	48 mm	33 mm	4,500	90	Clamping Screws	1058K79	00000
	40 mm	62 mm	38 mm	8,550	150	Clamping Screws	1058K84	000000

Quick-Grip Screw-Clamp Bushings

Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed. As you tighten the collar nut, the inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear.

304 Stainless Steel—304 stainless steel bushings are corrosion resistant for use in harsh environments.

	OD	Overall Wd.	Max. Torque, in·lbf		Each
Steel



	1/4"	5/8"	3/4"	200	5926K12	000000


	5/16"	3/4"	7/8"	400	5926K13	00000
	3/8"	3/4"	7/8"	480	5926K14	00000
	1/2"	7/8"	1"	840	5926K16	00000
	5/8"	1"	1 1/8"	1,350	5926K18	00000
	5/8"	1 1/2"	1 1/2"	1,950	5926K42	000000
	3/4"	1 1/4"	1 3/8"	1,600	5926K41	00000
	3/4"	1 1/2"	1 1/2"	2,350	5926K2	000000
	7/8"	1 3/4"	1 7/8"	2,850	5926K22	000000
	1"	1 3/4"	1 7/8"	3,250	5926K24	000000
	1 1/4"	2"	2 1/4"	4,700	5926K26	000000


	1 1/2"	2 3/8"	2 3/4"	5,650	5926K28	000000
	2"	2 7/8"	3 9/16"	12,900	5926K32	000000
	4 mm	16 mm	19 mm	120	2298K52	00000
	5 mm	16 mm	19 mm	150	2298K1	00000
	6 mm	16 mm	19 mm	180	2298K53	00000
	8 mm	20 mm	22 mm	400	2298K41	00000
	9 mm	20 mm	22 mm	450	2298K55	00000
	10 mm	23 mm	26 mm	660	2298K42	00000
	12 mm	23 mm	26 mm	790	2298K44	00000
	14 mm	26 mm	29 mm	1,150	2298K45	00000


	15 mm	26 mm	29 mm	1,250	2298K46	00000
	16 mm	26 mm	29 mm	1,350	2298K47	00000
	17 mm	32 mm	29 mm	1,900	2298K64	000000
	18 mm	32 mm	29 mm	2,000	2298K65	000000
	19 mm	32 mm	29 mm	2,150	2298K66	000000
	20 mm	35 mm	32 mm	2,750	2298K67	000000
	22 mm	35 mm	32 mm	3,050	2298K68	000000
	30 mm	45 mm	41 mm	5,100	2298K72	000000
	35 mm	50 mm	43 mm	5,950	2298K74	000000


	Zinc-Plated Steel



			16 mm	38 mm	38 mm	1,950	2298K15	000000


			17 mm	38 mm	38 mm	2,100	2298K16	000000
			20 mm	45 mm	48 mm	2,550	2298K57	000000
			22 mm	45 mm	48 mm	2,850	2298K21	000000
			25 mm	45 mm	48 mm	3,200	2298K58	000000
			30 mm	51 mm	57 mm	4,400	2298K59	000000


			304 Stainless Steel



					1/2"	7/8"	1"	840	2308K16	000000


					5/8"	1"	1 1/8"	1,350	2308K18	000000
					3/4"	1 1/2"	1 1/2"	2,350	2308K23	000000
1"					1 3/4"	1 7/8"	3,250	2308K27	000000

Hub-Mount Screw-Clamp Bushings

Transfer torque directly from a shaft to a hub. These bushings install over your hub to mount a sprocket, pulley, or gear to a shaft at the same time. Common in industrial gearbox applications, they can also connect a hollow shaft over a solid shaft. As screw-clamp bushings, they're good for shock loads. When you tighten the included clamping screws, the outer rings compress against a sprocket, pulley, or gear in between them, causing the inner rings to tighten around the shaft.

	OD	Overall Wd.	Max. Torque, in·lbf	Fastener Tightening Torque, in·lbf		Each
Zinc-Plated Steel



	15/16"	2"	7/8"	1,650	40	7654N11	000000


	1 1/8"	2 3/8"	15/16"	2,100	40	7654N12	00000
	1 3/8"	2 13/16"	1"	3,750	100	7654N13	000000
	1 11/16"	3 1/8"	1 1/8"	8,150	100	7654N14	000000
	1 15/16"	3 9/16"	1 3/16"	11,550	100	7654N15	000000
	2 1/8"	3 15/16"	1 5/16"	12,150	100	7654N16	000000
	2 7/16"	4 5/16"	1 5/16"	20,600	100	7654N17	000000
	2 5/8"	4 1/2"	1 5/16"	21,100	100	7654N18	000000
	2 15/16"	5 7/16"	1 7/16"	33,500	260	7654N19	000000
	3 1/8"	5 11/16"	1 7/16"	40,950	260	7654N21	000000
	3 1/2"	6 1/16"	1 11/16"	57,000	260	7654N22	000000

Corrosion-Resistant Flush-Mount Screw-Clamp Bushings

Insert these nickel-plated steel bushings into the bore of your sprocket for flush or recessed mounting in wet environments. When you tighten the included clamping screws on these bushings, their inner sleeve contracts onto the shaft and their outer sleeve expands to hold your sprocket, pulley, or gear. This keeps bushings from slipping during sudden starts and stops.

	OD, mm	Overall Wd., mm	Max. Torque, in·lbf	Fastener Tightening Torque, in·lbf	Includes		Each
Nickel-Plated Steel



	25	50	26	3,750	150	Clamping Screws	5515N11	0000000


	30	55	26	5,050	150	Clamping Screws	5515N12	000000
	35	60	26	7,050	150	Clamping Screws	5515N13	000000
	40	65	26	9,450	150	Clamping Screws	5515N14	000000
	45	75	32	15,900	360	Clamping Screws	5515N15	000000
	50	80	32	17,700	360	Clamping Screws	5515N16	000000
	55	85	32	22,700	360	Clamping Screws	5515N17	000000
	60	90	32	24,800	360	Clamping Screws	5515N18	000000

Keyless Locking Rigid Shaft Couplings for Overhung Loads

Support the weight of a motor and transfer torque to another shaft at the same time with these couplings. Often used to hang motors from conveyor belts and other driven equipment, or to connect long sections of shafts, these couplings eliminate the need for support brackets. Use a torque arm to prevent hanging motors from spinning.

The clamping screws on the coupling face squeeze two outer collars against an inner ring, pressing it tight against shafts to lock them together. This ring-locking mechanism leaves no room for backlash, meaning that all of the turning force created by the motor is passed on to the second shaft. These couplings grip shafts of any shape, so you can install them onto existing keyways and splines without using a key.

To install these couplings, use a torque wrench to tighten each screw to the fastener tightening torque listed for each coupling size. To remove, gradually loosen each screw in sequence until you can slide the coupling on the shaft. Warning: Do not remove any clamping screws from the coupling until the outer collars are separated from the inner ring. The ring is under tension, and a sudden release of the collars can cause serious injury.

Overhung load capacity is the amount of downward force that a coupling can withstand from a motor or other object that it is supporting. To calculate the overhung load, measure the distance from the center of the coupling to the center of gravity of the motor. Multiply that distance by the combined weight of the motor and the portion of the shaft between the coupling and the motor. Do not exceed the overhung load capacity for a coupling.

Steel

Image of Product. Front orientation. Rigid Shaft Couplings. Keyless Locking Rigid Shaft Couplings for Overhung Loads .

	Overall Lg.	OD	Max. Rotation Speed, rpm	Max. Torque, in·lbf	Fastener Tightening Torque, in·lbf	Overhung Load Cap., in·lbf	For Rotary Motion		Each
For Keyed, Round, and Splined Shafts



	1 1/4"	1 7/8"	3"	10,000	8,435	104	2,105	Forward/Reverse, Start/Stop, Continuous	3456N11	0000000


	1 3/8"	1 7/8"	3"	10,000	9,285	104	2,320	Forward/Reverse, Start/Stop, Continuous	3456N12	000000
	1 1/2"	2 3/16"	3 3/4"	8,000	17,160	264	4,290	Forward/Reverse, Start/Stop, Continuous	3456N13	000000
	1 3/4"	2 3/16"	3 3/4"	8,000	20,025	264	5,005	Forward/Reverse, Start/Stop, Continuous	3456N14	000000
	2"	2 11/16"	4 7/16"	7,700	32,685	264	8,170	Forward/Reverse, Start/Stop, Continuous	3456N15	000000
	2 1/4"	3 1/16"	4 3/4"	7,500	44,135	264	11,030	Forward/Reverse, Start/Stop, Continuous	3456N16	000000
	2 1/2"	3 1/16"	4 3/4"	7,500	49,040	264	12,260	Forward/Reverse, Start/Stop, Continuous	3456N17	000000

Corrosion-Resistant Flanged Screw-Clamp Bushings

Made from stainless steel or plated with nickel, these bushings resist corrosion. A mounting flange prevents movement during tightening. As screw-clamp bushings, they're good for shock loads. When you tighten the clamping screws, the bushing's inner sleeve tightens onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear.

Nickel-Plated Steel—Nickel-plated steel bushings have good corrosion resistance in wet environments. However, the plating may begin to flake with long-term use.

Stainless Steel—Stainless steel bushings have excellent corrosion resistance and can withstand prolonged exposure to moisture.

	OD	Overall Wd.	Max. Torque, in·lbf	Fastener Tightening Torque, in·lbf	Includes		Each
Nickel-Plated Steel



	1/4"	1"	15/16"	60	10	Clamping Screws	5530N11	0000000


	3/8"	1 1/4"	1 1/8"	250	30	Clamping Screws	5530N12	000000
	1/2"	1 5/16"	1 1/8"	440	30	Clamping Screws	5530N13	000000
	5/8"	1 9/16"	1 5/16"	840	70	Clamping Screws	5530N14	000000
	3/4"	1 3/4"	1 5/16"	1,050	70	Clamping Screws	5530N15	000000
	7/8"	1 7/8"	1 1/2"	1,850	70	Clamping Screws	5530N16	000000
	1"	1 15/16"	1 1/2"	2,100	70	Clamping Screws	5530N17	000000
	12 mm	33 mm	28 mm	420	30	Clamping Screws	5530N18	000000
	14 mm	35 mm	28 mm	490	30	Clamping Screws	5530N19	000000
	16 mm	40 mm	34 mm	880	70	Clamping Screws	5530N21	000000
	19 mm	44 mm	34 mm	1,050	70	Clamping Screws	5530N22	000000


	20 mm	44 mm	34 mm	1,150	70	Clamping Screws	5530N23	000000
	22 mm	48 mm	38 mm	1,850	70	Clamping Screws	5530N24	000000
	25 mm	50 mm	38 mm	2,100	70	Clamping Screws	5530N25	000000
	30 mm	64 mm	45 mm	3,500	120	Clamping Screws	5530N26	000000
	35 mm	70 mm	49 mm	5,550	120	Clamping Screws	5530N27	000000
	40 mm	76 mm	49 mm	6,350	120	Clamping Screws	5530N28	000000


	Stainless Steel



			1/4"	1"	15/16"	40	10	Clamping Screws	5530N101	000000


			3/8"	1 1/4"	1 1/8"	190	30	Clamping Screws	5530N102	000000
			1/2"	1 5/16"	1 1/8"	360	30	Clamping Screws	5530N103	000000
			12 mm	33 mm	28 mm	320	30	Clamping Screws	5530N104	000000
			14 mm	35 mm	28 mm	380	30	Clamping Screws	5530N105	000000
			16 mm	40 mm	34 mm	700	60	Clamping Screws	5530N106	000000
			19 mm	44 mm	34 mm	850	60	Clamping Screws	5530N107	000000
			20 mm	44 mm	34 mm	920	60	Clamping Screws	5530N108	000000
			22 mm	48 mm	38 mm	1,450	60	Clamping Screws	5530N109	000000
			25 mm	50 mm	38 mm	1,700	60	Clamping Screws	5530N111	000000
			30 mm	64 mm	45 mm	2,800	100	Clamping Screws	5530N112	000000


			35 mm	70 mm	49 mm	4,450	100	Clamping Screws	5530N113	000000

Self-Adjusting Spring Bushings

A toothed slot lets these bushings contract for insertion into the bore of your sprocket or pulley and then expand for a snug fit. Made of spring steel, they flex under stress and shock and can handle oscillating or slow rotational motion.

	OD	Overall Wd.	Material		Each
For 1/2" Diameter Shafts



		3/4"	1/2"	Steel	58365K85	000000


		3/4"	3/4"	Steel	58365K31	00000
		3/4"	1"	Steel	58365K32	00000


		For 3/4" Diameter Shafts



				1"	1/2"	Steel	58365K33	0000


				1"	5/8"	Steel	58365K101	0000
				1"	3/4"	Steel	58365K11	0000
				1"	1"	Steel	58365K12	0000
				1"	1 1/4"	Steel	58365K34	0000
				1"	1 1/2"	Steel	58365K13	0000
				1"	2"	Steel	58365K35	00000


				For 1" Diameter Shafts



						1 1/4"	1/2"	Steel	58365K36	0000


						1 1/4"	5/8"	Steel	58365K37	0000
						1 1/4"	3/4"	Steel	58365K38	0000
						1 1/4"	7/8"	Steel	58365K39	0000
						1 1/4"	1"	Steel	58365K14	0000
						1 1/4"	1 1/4"	Steel	58365K41	0000
						1 1/4"	1 1/2"	Steel	58365K15	0000
						1 1/4"	2"	Steel	58365K16	00000
						1 1/4"	2 1/2"	Steel	58365K102	00000
						1 1/4"	3"	Steel	58365K103	00000
						1 3/8"	3/4"	Steel	58365K104	00000


						1 3/8"	1"	Steel	58365K106	00000
						1 3/8"	1 1/4"	Steel	58365K105	00000
						1 1/2"	1"	Steel	58365K107	00000
						1 1/2"	1 1/2"	Steel	58365K108	00000


						For 1 1/8" Diameter Shafts



								1 3/8"	1"	Steel	58365K43	00000


								1 3/8"	1 1/2"	Steel	58365K44	00000


								For 1 1/4" Diameter Shafts



1 1/2"										1/2"	Steel	58365K45	0000


1 1/2"	3/4"									Steel	58365K46	0000
1 1/2"	1"									Steel	58365K17	0000
1 1/2"	1 1/4"									Steel	58365K47	0000
1 1/2"	1 1/2"									Steel	58365K18	00000
1 1/2"	2"									Steel	58365K19	00000
1 1/2"	2 1/2"									Steel	58365K48	00000
1 1/2"	3"									Steel	58365K49	00000
1 5/8"	1"									Steel	58365K109	00000
1 5/8"	1 1/4"	Steel								58365K111	00000
1 5/8"	1 1/2"	Steel	58365K112							00000


1 5/8"	2"	Steel	58365K113							00000


For 1 3/8" Diameter Shafts



		1 5/8"	1 1/2"							Steel	58365K114	00000


		1 3/4"	1 1/4"							Steel	58365K51	00000
		1 3/4"	1 1/2"							Steel	58365K52	00000
		1 3/4"	2"	Steel						58365K53	00000


		For 1 1/2" Diameter Shafts



				1 3/4"	1/2"					Steel	58365K54	0000


				1 3/4"	3/4"					Steel	58365K55	0000
				1 3/4"	1"					Steel	58365K56	00000
				1 3/4"	1 1/4"					Steel	58365K57	00000
				1 3/4"	1 1/2"					Steel	58365K21	00000
				1 3/4"	2"					Steel	58365K58	00000
				1 3/4"	2 1/2"					Steel	58365K59	00000
				1 3/4"	2 3/4"					Steel	58365K61	00000
				1 7/8"	3/4"					Steel	58365K115	00000
				1 7/8"	1"					Steel	58365K116	00000
				1 7/8"	1 1/4"					Steel	58365K117	00000


				1 7/8"	1 1/2"					Steel	58365K118	00000
				1 7/8"	2"					Steel	58365K119	00000
				2"	1"					Steel	58365K121	00000
				2"	1 1/4"	Steel				58365K122	00000
				2"	1 1/2"	Steel	58365K123			00000
				2"	2"	Steel	58365K124			00000
				2"	3"	Steel	58365K125			00000


				For 1 3/4" Diameter Shafts



						2"	1"	Steel		58365K62	00000


						2"	1 1/4"	Steel	58365K63	00000
						2"	1 1/2"	Steel	58365K64	00000
						2"	2"	Steel	58365K126	00000


						For 2" Diameter Shafts



								2 1/4"	1"	Steel	58365K132	00000


								2 1/4"	1 1/2"	Steel	58365K65	00000
								2 1/4"	2"	Steel	58365K66	00000
								2 1/4"	2 1/2"	Steel	58365K28	00000
								2 1/4"	3"	Steel	58365K133	00000
								2 3/8"	3/4"	Steel	58365K127	00000
								2 3/8"	1"	Steel	58365K128	00000
2 3/8"								1 1/4"	Steel	58365K129	00000
2 3/8"	1 1/2"							Steel	58365K131	00000
2 3/8"	2"							Steel	58365K134	00000
2 3/8"	3"							Steel	58365K135	00000


2 1/2"	1"							Steel	58365K67	00000
2 1/2"	1 1/2"							Steel	58365K68	00000
2 1/2"	2"							Steel	58365K69	00000
2 1/2"	2 1/2"							Steel	58365K71	00000
2 1/2"	3"							Steel	58365K72	00000


For 2 1/2" Diameter Shafts



		3"	1 1/2"					Steel	58365K74	00000


		3"	2"					Steel	58365K75	00000
		3"	3"					Steel	58365K77	00000


		For 3" Diameter Shafts



								3 1/2"	1 1/2"	Steel	58365K79	00000


								3 1/2"	2"	Steel	58365K81	00000
								3 1/2"	2 1/2"	Steel	58365K82	00000
								3 1/2"	3"	Steel	58365K83	00000

Quick-Grip Flanged Hydraulic Bushings

Tighten just one set screw to clamp these bushings evenly around your shaft. The screw forces hydraulic fluid in between the double-walled sleeve, expanding the two walls against the shaft and the hub of your sprocket, pulley, or gear for a tight hold. Since you don’t have to tighten multiple screw clamps individually, these bushings are quick to adjust and more likely to stay aligned on your shaft. They’re also good for shock loads. A mounting flange prevents movement during tightening. Use a hex key to tighten.

Note: To avoid deforming the sleeve walls, make sure to fully tighten the screw.

17-4 PH Stainless Steel—17-4 PH stainless steel bushings have excellent corrosion resistance in most environments.

				Set Screw
	For Shaft Dia.	OD	Overall Wd.	Hole Dia.	Thread Size	Max. Torque, in·lbf	Fastener Tightening Torque, in·lbf		Each
Steel



		5/8"	1 7/8"	1 9/16"	3/8"	M10	460	40	7636N11	0000000


		3/4"	2"	1 5/8"	3/8"	M10	750	40	7636N12	000000
		7/8"	2 3/16"	1 13/16"	3/8"	M10	1,150	40	7636N13	000000
		1"	2 5/16"	1 15/16"	3/8"	M10	1,650	40	7636N14	000000
		1 1/8"	2 1/2"	2 1/16"	3/8"	M10	2,550	40	7636N15	000000
		1 1/4"	2 11/16"	2 3/16"	3/8"	M10	3,800	40	7636N16	000000
		1 1/2"	3 5/16"	2 13/16"	5/8"	M16	7,850	180	7636N17	000000
		20 mm	51 mm	44 mm	3/8"	M10	970	40	7636N18	000000
		30 mm	64 mm	54 mm	3/8"	M10	3,350	40	7636N19	000000
		40 mm	86 mm	75 mm	5/8"	M16	9,700	180	7636N21	000000
		50 mm	98 mm	80 mm	5/8"	M16	16,800	180	7636N22	000000


		17-4 PH Stainless Steel



				3/4"	2"	1 5/8"	3/8"	M10	750	40	7636N23	000000


				7/8"	2 3/16"	1 13/16"	3/8"	M10	1,150	40	7636N24	000000
				1"	2 5/16"	1 15/16"	3/8"	M10	1,650	40	7636N25	000000
				1 1/4"	2 11/16"	2 3/16"	3/8"	M10	3,800	40	7636N26	000000
				1 1/2"	3 5/16"	2 13/16"	5/8"	M16	7,850	180	7636N27	00000000
				20 mm	51 mm	44 mm	3/8"	M10	970	40	7636N28	000000
				30 mm	64 mm	54 mm	3/8"	M10	3,350	40	7636N29	000000
				40 mm	86 mm	75 mm	5/8"	M16	9,700	180	7636N31	00000000
				50 mm	98 mm	80 mm	5/8"	M16	16,800	180	7636N32	00000000