Power-Over-Ethernet Hubs

Filter by

Output Power

Power Over Ethernet Standard

Specifications Met

Power Over Ethernet Type

Mounting Location

For IEC Power Cord Connection

C13

Electrical Connection

Number of Sockets

Transmission Speed

10 Mbit/s

100 Mbit/s

1 Gbit/s

Maximum Inrush Current @ Voltage

Number of Ports

Voltage

Certification

Export Control Classification Number (ECCN)

Power

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Material

Metal

Plastic

DFARS Specialty Metals

Exempt

RoHS

Compliant

Compliant with Exemptions

Height

Maximum Temperature

Minimum Temperature

Depth

REACH

Housing Material

Width

10 Products

Power Over Ethernet Injectors

IEC C5

Socket

IEC

C13

Socket

With a single cord, send data and electricity to Power over Ethernet (PoE) compatible devices. These injectors are commonly used to run devices such as routers and wireless access points in areas where no power outlet is nearby. To run these injectors, you need a power cord and two Ethernet cords (all sold separately). Connect one Ethernet cord from your network hub to the input of the injector, and the other Ethernet cord from the injector to your device.

These injectors meet U.S., Canadian, and European standards for safety. All have a limited power source (LPS) rating, meaning they meet international safety standards for low-voltage output. They’re also rated for DOE Level VI efficiency, signaling they comply with Department of Energy efficiency requirements for power usage.

As these injectors convert AC voltage to DC voltage, some noise from the AC voltage will carry into the output. While this won't affect most applications, this noise can interfere with other signals in extremely sensitive applications. The lower the output noise, the less interference it creates.

When choosing an injector, consider how much power your device requires.

Passive Power Over Ethernet—Use passive injectors with passive devices. These injectors send power to connected devices at all times; if they are incompatible, the devices could be damaged.

Active Power Over Ethernet—Active injectors check for compatibility with connected devices before sending power, protecting those devices from possible damage. They’re backwards compatible, so injectors with higher output powers can still be used with lower-power devices that meet a different IEEE standard.

15.4 W Output—Injectors with a 15.4W output power are often used with internet-connected phones and simple surveillance cameras.

30 W Output—Injectors with a 30W output power commonly power advanced surveillance systems, wireless access points, and lighting.

60 W Output—Injectors with a 60W output power are a common choice for building automation components and video conferencing equipment.

90 W Output—Injectors with a 90W output power are often connected to TVs and monitors.

C6—For injectors with an IEC C6 input connection, choose power cords with an IEC C5 socket.

C14—For injectors with an IEC C14 input connection, choose power cords with an IEC C13 socket.

Shielded Ethernet—Injectors with shielded connections protect from electromagnetic interference (EMI).

CoC Tier 2—Injectors rated for CoC Tier 2 efficiency meet European standards for efficient power usage.

	Output				Input Connection		For Power Cord Connection							Mounting
	Power, W	Voltage, V DC	Current, amp	Max. Output Noise Peak-to-Peak, mV DC	IEC Style	Type	IEC	Type	Ethernet Shielding	Max. Transmission Distance, ft.	Ht.	Wd.	Dp.	Fasteners Included	No. of Holes	Hole Dia.	Certification	External Power Supply Efficiency Std.	Specs. Met		Each
Single Phase—100V AC to 240V AC Input Voltage







				Passive Power Over Ethernet

				15.4	56	0.275	200	C6	Plug In	C5	Plug In	Shielded	325	1.1"	4.2"	1.6"	No	—	—	UL Listed, C-UL Listed	DoE Level VI	IEEE 802.3af	6966N15	000000




						Active Power Over Ethernet

						15.4	56	0.275	200	C6	Plug In	C5	Plug In	Shielded	325	1.1"	4.2"	1.6"	No	—	—	UL Listed, C-UL Listed	DoE Level VI	IEEE 802.3af	6966N11	00000


						30	56	0.536	200	C14	Plug In	C13	Plug In	Shielded	325	1.2"	5"	1.8"	No	2	1/8"	UL Listed, C-UL Listed	DoE Level VI, CoC Tier 2	IEEE 802.3at	6966N12	00000
						60	56	0.535	250	C14	Plug In	C13	Plug In	Shielded	325	1.4"	6.4"	2.6"	No	2	1/8"	UL Listed, C-UL Listed	DoE Level VI, CoC Tier 2	IEEE 802.3bt	6966N13	00000
						90	56	1.6	250	C14	Plug In	C13	Plug In	Unshielded	325	1.7"	6.5"	3.15"	No	2	1/8"	UL Listed, C-UL Listed	DoE Level VI	IEEE 802.3bt	6966N14	00000

DIN-Rail-Mount Ethernet Switches

Mount these Ethernet switches onto a standard 35 mm DIN rail alongside PLCs, relays, and power supplies—they snap in place and stay secure. They connect computers, sensors, and other devices to the same network so they can talk to each other, access the Internet, and provide you with real-time diagnostics. Switches do not require set up—just plug in a device and it will be connected to your network. These switches are backward compatible, so they'll work in networks below their rated transmission speed. For example, a 100 Mbit/s switch will work in a 10 Mbit/s network, but it will only run at 10 Mbit/s.

Ethernet Switches with SFP Ports


5 Total Ethernet Ports with 2 SFP Ports	8 Total Ethernet Ports with 2 SFP Ports

Switches with SFP ports (small form-factor pluggable) accept transceivers that connect devices to Ethernet and fiber-optic lines. They feature Power over Ethernet (PoE), so they can transmit both data and power through a single port.

Ethernet		PoE
Total No. of Ports	Connection	No. of Ports	Std.	Type	No. of SFP Ports	Transmission Speed	Ht.	Wd.	Dp.	Housing Material	Output Power, W	Voltage, V DC	Wire Connection	No. of Terminals	Temp. Range, ° F	Certification		Each



	5	RJ45	4	PoE+ Type 2	Active	2	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	6 5/16"	2"	4 3/4"	Metal	30	24 to 57	Screw Terminal	2	10 to 140	CE Marked	8653T47	0000000


	8	RJ45	8	PoE+ Type 2	Active	2	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	6 5/16"	2"	4 3/4"	Metal	30	24 to 57	Screw Terminal	6	-40 to 165	CE Marked	8653T46	000000

Device-Prioritizing Rack-Mount Ethernet Switches

Control which devices get priority speed on your network. Also known as managed Ethernet switches, these switches reduce network congestion so security, automation, and other critical systems have the bandwidth they need. Use them to create smaller networks called VLANs (Virtual Local Area Networks) to improve performance and limit user access to specific parts of the network. If you need to connect devices that don’t use Ethernet, these switches have two SFP (small form-factor pluggable) ports that let you plug in a transceiver or module.

These switches mount into standard 19" wide racks, cabinets, and enclosures. To set them up, just enter their IP address into a web browser. They are backward compatible, so they'll work in networks below their rated transmission speed. That means a 100 Mbit/s switch will work in a 10 Mbit/s network, but it will only run at 10 Mbit/s.

Ethernet Switches with Power over Ethernet (PoE) Type 2


8 Ethernet Sockets with 2 SFP Sockets	24 Ethernet Sockets with 2 SFP Sockets

Switches with Power over Ethernet (PoE) can send both data and electricity to PoE-compatible devices, so you won’t have to run a separate power cord. If a device doesn’t support PoE, the switch only sends data to prevent damage. Their 30W output is often used to power advanced surveillance systems, wireless access points, and lighting.

Ethernet											Mounting
No. of Sockets	Connection	Power Over Ethernet Type	No. of SFP Sockets	Transmission Speed	Ht.	Wd.	Dp.	Housing Material	Output Power, W	Voltage, V AC	Fasteners Included	Hole Lg. x Wd.	Electrical Connection	IEC Connector Type	Power Cord Lg., ft.	Specs. Met		Each
8	RJ45	Active	2	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1 3/4"	11"	7 1/16"	Metal	30	100 to 240	No	0.35" × 0.24"	Straight Blade	C14	5	IEEE 802.1q	9507N12	0000000
24	RJ45	Active	2	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1 3/4"	17 5/16"	8 3/16"	Metal	30	100 to 240	No	0.47" × 0.28"	Straight Blade	C14	5	IEEE 802.1q	9507N11	000000

Rack-Mount Ethernet Switches

Mount these Ethernet switches into standard 19" wide racks, cabinets, and enclosures. They connect computers, sensors, and other devices to the same network so they can talk to each other, access the Internet, and provide you with real-time diagnostics. These switches don’t require setup—just plug in a device and it will be connected to your network.

These switches are backward compatible, so they'll work in networks below their rated transmission speed. That means a 100 Mbit/s switch will work in a 10 Mbit/s network, but it will only run at 10 Mbit/s.

Ethernet Switches with Power Over Ethernet (PoE) Type 2

16 Sockets

Switches with Power over Ethernet (PoE) can send both data and electricity through a single cord to PoE-compatible devices, so you won’t have to run a separate power cord. If a device doesn’t support PoE, the switch only sends data to prevent damage. Their 30W output is often used to power advanced surveillance systems, wireless access points, and lighting.

Ethernet										Mounting
No. of Sockets	Power Over Ethernet Type	Connection	Transmission Speed	Ht.	Wd.	Dp.	Housing Material	Output Power, W	Voltage, V AC	Fasteners Included	Hole Lg. x Wd.	Electrical Connection	IEC Connector Type	Power Cord Lg., ft.	Certification		Each



	16	Active	RJ45	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1 3/4"	17 3/8"	8 1/8"	Metal	30	100 to 240	No	0.47" × 0.26"	Straight Blade	C14	5	CE Marked	9293N112	0000000