McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    11 Products

    High-Accuracy Torque-Measuring Wrenches

    Image of Product. Front orientation. Torque Wrenches. High-Accuracy Torque-Measuring Wrenches.
    Image of Attribute. Front orientation.

    Trust the precision of your measurements—these wrenches are accurate to ±1%. They display torque as it’s measured and the maximum torque reached. Use to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. To fasten to a specific value, set the desired torque—lights and an audible alarm indicate when target has been reached or exceeded. The display rotates so you can read it at any angle. These wrenches come with a calibration certificate, which includes test measurements that confirm accuracy.
    Torque—You can tighten fasteners that require less torque than the values listed, but the accuracy ratings apply only within the specified range.
    Accuracy
    Square Drive
    Size
    Torque
    Graduations
    Clockwise
    Counterclockwise
    Overall
    Lg.
    Grip
    Material
    Display
    Type
    Batteries
    Included
    Certificate Type
    Each
    Nonratcheting
     
    in·lbf, ft·lbf, N-m
    1/4"7.5 in·lbf to 75 in·lbf
    0.63 ft·lbf to 6.25 ft·lbf
    0.84 N-m to 8.5 N-m    		0.01 in·lbf
    0.01 ft·lbf
    0.01 N-m    		±1%±1%11"PlasticDigitalYesCalibration Certificate with Test Data Traceable to NIST00000000000000
    1/4"10 in·lbf to 100 in·lbf
    0.83 ft·lbf to 8.3 ft·lbf
    1.1 N-m to 11.1 N-m    		0.1 in·lbf
    0.01 ft·lbf
    0.01 N-m    		±1%±1%11"PlasticDigitalYesCalibration Certificate with Test Data Traceable to NIST0000000000000
    3/8"25 in·lbf to 250 in·lbf
    2.1 ft·lbf to 20.8 ft·lbf
    2.8 N-m to 28.2 N-m    		0.1 in·lbf
    0.01 ft·lbf
    0.01 N-m    		±1%±1%11"PlasticDigitalYesCalibration Certificate with Test Data Traceable to NIST0000000000000
    3/8"60 in·lbf to 600 in·lbf
    5 ft·lbf to 50 ft·lbf
    6.8 N-m to 67.8 N-m    		0.1 in·lbf
    0.01 ft·lbf
    0.1 N-m    		±1%±1%11"PlasticDigitalYesCalibration Certificate with Test Data Traceable to NIST0000000000000
    1/2"300 in·lbf to 3,000 in·lbf
    25 ft·lbf to 250 ft·lbf
    33.8 N-m to 338 N-m    		1 in·lbf
    0.1 ft·lbf
    0.1 N-m    		±1%±1%22"PlasticDigitalYesCalibration Certificate with Test Data Traceable to NIST0000000000000
    3/4"720 in·lbf to 7,200 in·lbf
    60 ft·lbf to 600 ft·lbf
    81 N-m to 813 N-m    		1 in·lbf
    0.1 ft·lbf
    0.1 N-m    		±1%±1%47"PlasticDigitalYesCalibration Certificate with Test Data Traceable to NIST000000000000000
     

    High-Accuracy Dial Torque-Measuring Wrenches

    Image of Product. Front orientation. Torque Wrenches. High-Accuracy Dial Torque-Measuring Wrenches.
    Image of Attribute. Front orientation.

    Trust the precision of your measurements—these wrenches are accurate to ±1%. A main pointer on the dial shows torque as it’s being applied and a memory pointer indicates the maximum torque reached. Use these wrenches to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. They come with a calibration certificate, which includes test measurements that confirm accuracy.
    Note: Accuracy ratings do not apply to the lower 20% of the torque range.
    Accuracy
    Square Drive
    Size
    Torque
    Graduations
    Clockwise
    Counterclockwise
    Overall
    Lg.
    Grip
    Material
    Display
    Type
    Certificate Type
    Each
    Nonratcheting
     
    in·lbf
    1/4"0 in·lbf to 15 in·lbf0.25 in·lbf±1%±1%9 15/16"SteelDialCalibration Certificate with Test Data Traceable to NIST00000000000000
    1/4"0 in·lbf to 30 in·lbf0.5 in·lbf±1%±1%9 15/16"SteelDialCalibration Certificate with Test Data Traceable to NIST0000000000000
    1/4"0 in·lbf to 75 in·lbf1 in·lbf±1%±1%9 15/16"SteelDialCalibration Certificate with Test Data Traceable to NIST0000000000000
    3/8"0 in·lbf to 150 in·lbf2.5 in·lbf±1%±1%9 15/16"SteelDialCalibration Certificate with Test Data Traceable to NIST0000000000000
    3/8"0 in·lbf to 300 in·lbf5 in·lbf±1%±1%12 1/2"SteelDialCalibration Certificate with Test Data Traceable to NIST0000000000000
     
    back to top