Adjustable-Width Sheet Metal Benders for Bench Vises
Shape sheet metal using your bench vise as a sturdy base. Remove or slide the four dies along the clamping bar to form angles, channels, boxes, trays, and pans in a variety of widths. Unlike bench-top and floor-mount benders, these are not permanently mounted—pull them out when you need them and store them when you don’t.
Base | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Bending Wd. | For Max. Steel Thick. | For Jaw Wd. | Ht. | Wd. | Dp. | Max. Box Dp. | Frame Material | Ht. | Wd. | Dp. | Handle Grip Material | Includes | Each | |
For Aluminum, Copper, Stainless Steel, Steel | ||||||||||||||
| 12 1/2" | 1/16" | 4"-8" | 11" | 13" | 2" | 1" | Steel | 1" | 9 1/2" | 1/2" | Rubber | One 1" Wide Forming Die, One 2 7/8" Wide Forming Die, One 2" Wide Forming Die, One 5 7/8" Wide Forming Die | 0000000 | 0000000 |
Floor-Mount Adjustable-Width Sheet Metal Benders
Reinforced construction lets this bender handle thicker material than the bench-top model. Position the movable forming dies, also known as fingers, to make boxes, trays, and pans in different widths. An adjustable upper leaf and nose bar allow for radius bending.
Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Bending Wd. | For Max. Steel Thick. | Min. Reverse Bend | Ht. | Wd. | Dp. | Max. Box Dp. | Frame Material | Mounting Fasteners Included | No. of | Dia. | Includes | Each | |
For Aluminum, Stainless Steel, Steel | |||||||||||||
| 48 1/4" | 1/16" | 1/4" | 53" | 72" | 36" | 4" | Steel | No | 4 | 5/8" | Five 2" Wide Forming Dies Six 3" Wide Forming Dies Five 4" Wide Forming Dies Removable Apron Insert Apron Stop Rod Counterweights | 0000000 | 000000000 |
Bench-Top Adjustable-Width Sheet Metal Benders
Position the movable forming dies, also known as fingers, to make boxes, trays, and pans in different widths. An adjustable upper leaf and nose bar allow for radius bending.
Sheet Metal Bender | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | Optional 26" Ht. Floor Stand | |||||||||||||||
| Max. Bending Wd. | For Max. Steel Thick. | Min. Reverse Bend | Ht. | Wd. | Dp. | Max. Box Dp. | Frame Material | Mounting Fasteners Included | No. of | Dia. | Handle Grip Material | Includes | Each | Each | ||
For Aluminum, Stainless Steel, Steel | ||||||||||||||||
| 48 1/4" | 3/64" | 1/4" | 25" | 65" | 22" | 4" | Steel | No | 4 | 1/2" | Plastic | Five 2" Wide Forming Dies Six 3" Wide Forming Dies Five 4" Wide Forming Dies Removable Apron Insert Apron Stop Rod Counterweights | 0000000 | 000000000 | 0000000 | 0000000 |
Floor-Mount Combination Presses, Punches, and Shears
Also known as a 40-ton metalworker, these hydraulic machines handle a variety of forming tasks including pressing, punching, notching, and shearing. The safety guard complies with ANSI B11.8 standards. Machines require 1 1/2 gallons of Mobil DTE 24 Ultra or equivalent hydraulic oil (sold separately).
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., lbs. | Throat Dp. | Ht. | Wd. | Dp. | Steel Thick. for Pressing | Steel Rod Dia. for Shearing | Sheet Metal Size for Shearing, Thick. × Wd. | Power, hp | Voltage | Plug Type | Cord Lg., ft. | Each | |
| 80,000 | 3 3/4" | 55 1/4" | 30" | 24" | 3/8" | 3/4" | 3/8" × 4", 1/4" × 6" | 1 1/2 | 120V AC | Three Prong | 5 | 00000000 | 000000000 |
Sheet Metal Size for Shearing | |||
|---|---|---|---|
| Thick. | Wd. | Each | |
| 1/2" | 8" | 00000000 | 000000000 |
For Notch | ||||
|---|---|---|---|---|
| Lg. | Wd. | Ht. | Each | |
| 1 3/4" | 2" | 1/4" | 00000000 | 000000000 |
Heavy Duty Die Sets for Presses
Hot-rolled steel press plates and hardened steel bushings give these die sets the strength to handle punching and metal forming applications. Use them with manual, powered, and hydraulic presses.
For technical drawings and 3-D models, click on a part number.
Die Sets for Presses
Use in assembly operations and light stamping work. They work with manual, powered, and hydraulic presses.
For technical drawings and 3-D models, click on a part number.
Quick-Setup Die Sets for Presses
These dies have a plate on top of the upper die and a 1/2"-13 tool adapter that connects the die and ram for quick setup. Use them with manual, powered, and hydraulic presses for assembly operations and light stamping work.
For technical drawings and 3-D models, click on a part number.
Tool Adapter | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Clearance | Ht. | Material | Lg. | Thread Size | Features | Each | |
| 2 7/8" | 3 1/2" | 2" | 3 1/2" | Steel | 4 1/2" | 1/2"-13 | Ram Attachment | 0000000 | 0000000 |
| 3 3/4" | 5" | 3 1/4" | 5" | Steel | 4 1/2" | 1/2"-13 | Ram Attachment | 0000000 | 000000 |
| 4 3/8" | 6 1/2" | 2 5/8" | 5" | Steel | 4 1/2" | 1/2"-13 | Ram Attachment | 0000000 | 000000 |
| 5" | 8 1/2" | 3 3/4" | 6 3/4" | Steel | 4 1/2" | 1/2"-13 | Ram Attachment | 0000000 | 000000 |
| 6" | 9 1/2" | 3 3/4" | 6 3/4" | Steel | 4 1/2" | 1/2"-13 | Ram Attachment | 0000000 | 000000 |
| 7" | 10 3/8" | 3 3/4" | 6 3/4" | Steel | 4 1/2" | 1/2"-13 | Ram Attachment | 0000000 | 000000 |