Electric Floor-Mount Presses
These presses have a control lever to advance and return the ram. Adjust the table height with the removable table pins. Mobil DTE 24 Ultra or equivalent hydraulic oil is required (sold separately).
Table | Ram | Overall | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., lbs. | Max. Stroke Lg. | Clearance Over Table | Travel | Lg. | Wd. | Material | Dia. | Ram Hole Thread Size | Ht. | Wd. | Dp. | Power, hp | Voltage | Plug Type | Includes | Each | |
Fixed Ram | |||||||||||||||||
20,000 | 10" | 40" | 36" | 20" | 8 1/2" | Steel | 1 3/4" | 1"-8 | 80" | 29 3/4" | 24" | 1 | 120V AC | Three Prong | Hydraulic Pump with Fittings, Pressure Gauge | 00000000 | 000000000 |
50,000 | 10" | 44" | 36" | 28" | 9 1/8" | Steel | 3" | 1 1/2"-6 | 88" | 37 1/2" | 30" | 1 | 120V AC | Three Prong | Hydraulic Pump with Fittings, Lifting Chain, Pressure Gauge | 00000000 | 00000000 |
Floor-Mount Combination Presses, Punches, and Shears
Also known as a 40-ton metalworker, these hydraulic machines handle a variety of forming tasks including pressing, punching, notching, and shearing. The safety guard complies with ANSI B11.8 standards. Machines require 1 1/2 gallons of Mobil DTE 24 Ultra or equivalent hydraulic oil (sold separately).
Overall | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., lbs. | Throat Dp. | Ht. | Wd. | Dp. | Steel Thick. for Pressing | Steel Rod Dia. for Shearing | Sheet Metal Size for Shearing, Thick. × Wd. | Power, hp | Voltage | Plug Type | Cord Lg., ft. | Each | |
80,000 | 3 3/4" | 55 1/4" | 30" | 24" | 3/8" | 3/4" | 3/8" × 4", 1/4" × 6" | 1 1/2 | 120V AC | Three Prong | 5 | 00000000 | 000000000 |
Sheet Metal Size for Shearing | |||
---|---|---|---|
Thick. | Wd. | Each | |
1/4" | 8" | 00000000 | 000000000 |
For Notch | ||||
---|---|---|---|---|
Lg. | Wd. | Ht. | Each | |
1 3/4" | 2" | 1/4" | 00000000 | 000000000 |
Small-Hole Precision Benchtop Drill Presses
Use for drilling small holes. A sensitive belt-drive motor reduces drill breakage and damage.
Max. Workpiece Dia. | For Max. Drill Bit Size for Steel | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Chuck Manufacturer | No. of Speeds | Spindle Jacobs Taper No. | Spindle Travel | Motor Power, hp | Motor Current, A | Wt., lbs. | Each | |
120V AC—Single Phase | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Jacobs Spindle Shank | ||||||||||||
7" | 1/8" | 1/8" | 20,000 | Albrecht | Variable | 0 | 1 1/2" | 1/5 | 2 | 25 | 0000000 | 000000000 |
Extended-Reach Economy Benchtop Drill Presses
To accommodate large, odd-shaped pieces of material, the head of this drill press moves 12" forward and backward. It also tilts 45° left and 90° right (as viewed when facing the drill press).
For Max. Drill Bit | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Workpiece Dia. | Max. Table Cap., lbs. | For Bit Shank Type | Size for Steel | Size for Cast Iron | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Chuck Key Included | No. of Speeds | Spindle Morse Taper No. | Spindle Travel | Motor Power, hp | Motor Current, A | Wt., lbs. | Current | Each | |
120V AC—Single Phase | ||||||||||||||||
Morse Spindle Shank | ||||||||||||||||
33" | 70 | Hex, Round | 3/8" | 5/8" | 5/8" | 3,100 | Yes | 5 | 2 | 3 5/32" | 1/2 | 5 | 95 | 4.8A | 00000000 | 0000000 |
Economy Benchtop Drill Presses
Use for drilling holes in metal workpieces and mount to a work surface to save floor space.
Economy Benchtop Drill Presses | Replacement Spring Cap Assembly | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Workpiece Dia. | Max. Table Cap., lbs. | For Max. Drill Bit Size for Cast Iron | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Chuck Key Included | No. of Speeds | Spindle Jacobs Taper No. | Spindle Morse Taper No. | Spindle Travel | Motor Power, hp | Motor Current, A | Wt., lbs. | Each | Each | ||
120V AC—Single Phase | ||||||||||||||||
Jacobs Spindle Shank | ||||||||||||||||
10" | 70 | 1/2" | 1/2" | 3,070 | Yes | 5 | 33 | __ | 2 1/2" | 1/3 | 4.1 | 70 | 00000000 | 0000000 | 00000000 | 000000 |
13" | 80 | 1/2" | 1/2" | 3,100 | Yes | 12 | 3 | __ | 3 1/8" | 1/2 | 5 | 110 | 0000000 | 000000 | 0000000 | 00000 |
120V AC/240V AC—Single Phase | ||||||||||||||||
Morse Spindle Shank | ||||||||||||||||
15" | 100 | 5/8" | 5/8" | 3,450 | Yes | 16 | __ | 2 | 5" | 1/2 | 7.3 | 150 | 0000000 | 00000000 | 0000000 | 00000 |
Replacement Spindle Assembly for Drill Presses with Morse Spindle Shanks | 0000000 | Each | 0000000 |
Variable-Speed Economy Floor Drill Presses
Turn the dial on this drill press while it is running to get the optimum speed for your job. A laser projects a crosshair at the point of bit contact and a digital readout displays the spindle speed.
Max. Workpiece Dia. | Max. Table Cap., lbs. | For Max. Drill Bit Size for Steel | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Spindle Morse Taper No. | Spindle Travel | Motor Power, hp | Current | Wt., lbs. | Each | |
120V AC/240V AC—Single Phase | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Morse Spindle Shank | |||||||||||
18" | 88 | 5/8" | 5/8" | 3,000 | 2 | 6" | 1 | 15A | 245 | 0000000 | 000000000 |
Extended-Reach Economy Floor Drill Presses
To accommodate large, odd-shaped pieces of material, the head of this drill press moves 12" forward and backward. It also tilts 45° left and 90° right (as viewed when facing the drill press).
For Max. Drill Bit | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Workpiece Dia. | Max. Table Cap., lbs. | Size for Steel | Size for Cast Iron | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Chuck Key Included | No. of Speeds | Spindle Morse Taper No. | Spindle Travel | Motor Power, hp | Current | Wt., lbs. | Each | |
120V AC—Single Phase | ||||||||||||||
Morse Spindle Shank | ||||||||||||||
33" | 50 | 3/8" | 5/8" | 5/8" | 3,100 | Yes | 5 | 2 | 3 5/32" | 1/2 | 4.8A | 143 | 00000000 | 0000000 |
Multispeed Economy Floor Drill Presses
Select from a number of speeds by repositioning the drive belt before starting the drill press.
Multispeed Economy Floor Drill Presses | Replacement Spring Cap Assembly | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Workpiece Dia. | Max. Table Cap., lbs. | For Max. Drill Bit Size for Steel | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Chuck Key Included | No. of Speeds | Spindle Morse Taper No. | Spindle Travel | Motor Power, hp | Current | Wt., lbs. | Each | Each | ||
120V AC/240V AC—Single Phase | |||||||||||||||
Morse Spindle Shank | |||||||||||||||
15" | 100 | 5/8" | 5/8" | 3,450 | Yes | 16 | 2 | 5" | 1/2 | 7.3A | 165 | 0000000 | 000000000 | 0000000 | 000000 |
17" | 100 | 5/8" | 5/8" | 3,450 | Yes | 16 | 2 | 5" | 1 | 10A | 180 | 0000000 | 00000000 | 0000000 | 00000 |
120V AC—Single Phase | |||||||||||||||
Morse Spindle Shank | |||||||||||||||
20" | 65 | 1" | 3/4" | 4,200 | Yes | 12 | 3 | 4 3/4" | 1 | 13.5A | 315 | 00000000 | 00000000 | 000000 | 00 |
Floor Drill Presses
The weight and rigidity of these presses prevent vibration so you can maintain close tolerances for high-quality metal drilling. Turn the dial on these drill presses while they are running to get the optimum speed for your job.
Drill presses with 20" max. workpiece diameter have a safety guard that swings away for easy tool changes.
Max. Workpiece Dia. | Max. Table Cap., lbs. | For Max. Drill Bit Size for Steel | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Chuck Key Included | No. of Speeds | Spindle Morse Taper No. | Spindle Travel | Motor Power, hp | Current | Wt., lbs. | Each | |
120V AC—Single Phase | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Morse Spindle Shank | |||||||||||||
18 1/8" | 200 | 1 1/16" | 3/4" | 1,200 | Yes | Variable | 3 | 5 3/8" | 2 | 6.8A | 675 | 000000 | 000000000 |
120V AC/240V AC—Single Phase | |||||||||||||
Morse Spindle Shank | |||||||||||||
20" | 250 | 1 1/4" | __ | 2,000 | No | Variable | 3 | 6" | 2 | 25A | 649 | 0000000 | 00000000 |
240V AC/460V AC—Three Phase | |||||||||||||
Morse Spindle Shank | |||||||||||||
20" | 250 | 1 1/4" | __ | 2,000 | No | __ | 3 | 6" | 2 | 7A | 649 | 0000000 | 00000000 |
Optional Morse Taper Arbor with Drill Chuck for 20" Floor Drill Presses | 0000000 | Each | 0000000 |