These are the most commonly used pressure gauges. Use them with pumps, filters, regulators, and in process lines to measure and display pressure.

These gauges fit into square cutouts in your instrument panel.

A digital display allows for easy reading of measurements.

Keep tabs on liquid levels in pump and tank applications with these gauges—a dual scale displays pressure in feet of H₂O and psi.

A liquid-filled dial reduces needle flutter for precise readings in high-vibration applications.

These gauges have a red needle that indicates the highest pressure reached since the last setting. They have a liquid-filled dial that reduces needle flutter for precise readings in high-vibration applications.

The case material and connection threads are stainless steel for protection in corrosive environments, plus the dial is glycerin-filled to reduce needle flutter in high-vibration applications.

These gauges have a unique case design that eliminates the air bubble on the dial face, which can distort readings.

Gauges have an accuracy of ± 2%.

These gauges have a liquid-filled dial that reduces needle flutter in high-vibration applications reaching 2,000 psi.

Use in high-pressure applications up to 2,000 psi.

A band of green, yellow, and red provides a clear indication of changes in differential pressure.

Use in medium-pressure applications up to 1,500 psi.

Keeping corrosive substances from touching pressure gauges used in food-processing and pharmaceutical plants, these guards have a sanitary design.

Remotely monitor pressure in general purpose applications such as pumping and compressing systems.

These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program your receiving device to correct for these factors. They convert pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

Choose these transmitters when you need reliable pressure monitoring but not high accuracy.

The diaphragm on these transmitters mounts flush with your system’s connection, leaving no room for thick liquids to clog or harden. They’re often used to monitor pressure in wastewater, paint, and adhesive-dispensing applications.

FM approved and CSA certified for use in hazardous locations, these transmitters monitor pressure where combustible fumes may be present.

For use in sanitary applications such as food processing, these transmitters are 3-A certified.

Convert both pressure and vacuum into an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

Monitor your system’s pressure and vacuum from a smartphone or tablet via Bluetooth. These battery-powered transmitters send alerts if equipment requires your attention, so they’re good for preventative maintenance and route-based monitoring.

These transmitters automatically compensate for error introduced into both pressure and vacuum measurements by vibrations as well as temperature fluctuations, so you do not need to program corrections for these factors into your receiving device. They convert pressure and vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

View readings at the source with the dial indicator or remotely using a receiver—these transmitters measure the difference in pressure between two inputs in liquid applications.

Used with pumps, cooling systems, and other liquid applications, these transmitters remotely measure the difference in pressure between two inputs.

At least four times as accurate as standard vacuum transmitters, these transmitters sense vacuum at an accuracy of ±0.25%, making them ideal for use in laboratories and in analytical testing applications.

Test and calibrate transmitters, gauges, and other equipment that measures pressure.

With an accuracy of ±0.05%, these have the highest accuracy of all our test gauges.

All-stainless steel construction makes these gauges suitable for testing and calibrating in corrosive environments.

Tighten these threaded fittings with your hands for a secure connection in testing, flushing, venting, and plugging applications—no tools, tape, or sealant required.