Pressure Gauges for Propane

Filter by

Outlet Pressure

For Use With

Maximum Outlet Pressure Gauge Measurement

Maximum Inlet Pressure

Inlet Pipe Size

Inlet Thread Type

Outlet Thread Type

Valve Function

Stage

Body Material

Inlet Connection

Number of Gauge Ports

Flow Coefficient (Cv)

Outlet Pipe Size

Diaphragm Material

Inlet Connection Port

Outlet Connection Port

Gauge Port Location

DFARS Compliance

Inlet Location

Outlet Location

Outlet Pressure Gauge Included

REACH Compliance

Forward

How can we improve?

5 Products

About Gas Regulators

For Use With: See Table
Temperature Range: -20° to 120° F

Attach these valves to acetylene, hydrogen, methane, propane, or propylene tanks to reduce a high inlet pressure to a lower, stable outlet pressure. They have Compressed Gas Association (CGA) numbered inlet fittings for secure connections to compressed gas tanks. Choose a valve with the same CGA number as your tank and other system components. Valves come with a gauge to monitor outlet pressure and a gauge to monitor inlet pressure from the tank.

Choose a valve with a maximum outlet pressure that’s approximately twice your application’s normal operating pressure. Your operating pressure should never exceed 75% of the valve’s maximum outlet pressure.

Single-stage valves reduce pressure in one step, which causes the outlet pressure to fluctuate slightly as you empty the tank. They’re best for applications where a constant outlet pressure isn’t critical.

Two-stage valves progressively reduce pressure over two steps for more consistent outlet pressure at all times. They’re often used in applications that require a constant outlet pressure regardless of the tank level.

Valves with a brass body have a longer service life than valves with a brass and steel body.

Single-Stage Valves

Male Outlet × Male Inlet Single-Stage Valve With Knob

Male Outlet × Male Inlet Single-Stage Valve With T-Handle

Inlet				Outlet					Material
CGA Number	Location	Thread Direction	Pressure Gauge Range, psi	Thread Size	Location	Thread Direction	Pressure Range, psi	Pressure Adjustment Method	Body	Seal	Diaphragm		Each
For Use With Propane and Propylene
UNF Male Outlet × NGO Male Inlet
CGA 510	Side	Left Hand	0 to 400	9/16"-18	Side	Left Hand	0 to 50	T-Handle	Brass	PTFE	Rubber	0000000	0000000
CGA 510	Side	Left Hand	0 to 400	9/16"-18	Side	Left Hand	5 to 50	Knob	Brass/Steel	PTFE	Rubber	0000000	000000

Two-Stage Valves

Male Outlet × Male Inlet Two-Stage Valve With T-Handle

Inlet				Outlet					Material
CGA Number	Location	Thread Direction	Pressure Gauge Range, psi	Thread Size	Location	Thread Direction	Pressure Range, psi	Pressure Adjustment Method	Body	Seal	Diaphragm		Each
For Use With Propane and Propylene
UNF Male Outlet × NGO Male Inlet
CGA 510	Side	Left Hand	0 to 400	9/16"-18	Side	Left Hand	0 to 50	T-Handle	Brass/Steel	PTFE	Rubber	0000000	0000000

Pressure-Regulating Valves for Fuel Gases

With T-Handle

For Use With: See Table
Temperature Range: See Table

Install these valves directly in gas distribution pipelines for acetylene, hydrogen, or propane. They automatically reduce a high inlet pressure to a lower, stable outlet pressure. Valves have two outlets to fit various pipe configurations and come with a plug to close the unused outlet. The gauge monitors outlet pressure. All valves are single stage and reduce pressure in one step, which causes the outlet pressure to fluctuate.

	Inlet			Outlet
For Use With	Pipe Size	Location	Max. Pressure, psi	Pipe Size	Location	Pressure Adjustment Method	Pressure Gauge Range, psi	Temperature Range, ° F	End-to-End Lg.	Port-to-Port Lg.		Each
NPT Female
Brass Body—Stainless Steel Diaphragm and Neoprene Seal
Hydrogen, Propane	1/4	Side	500	1/4	Bottom, Side	T-Handle	0 to 60	0° to 120°	2.40"	1.01"	0000000	0000000
Hydrogen, Propane	1/4	Side	500	1/4	Bottom, Side	T-Handle	0 to 200	0° to 120°	2.40"	1.01"	0000000	000000

Email Us

About Gas Regulators

Tank-Mount Pressure-Regulating Valves for Fuel Gases

Pressure-Regulating Valves for Fuel Gases