A four-digit LCD display allows for easy reading of measurements. The LCD shuts off automatically to extend battery life. Gauges are commonly used with pneumatic regulators, compressors, and in critical processes that require high accuracy, such as hydraulic and laboratory applications.

A band of green, yellow, and red provides a clear indication of changes in differential pressure. Gauges are commonly used to indicate clogged filters.

These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program corrections for these factors into your receiving device. Use the keypad on these transmitters to set the pressure range, choose the unit of measure, and zero the reading. These transmitters convert pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment. They will only provide accurate readings within the rated pressure range.

All transmitters are rated IP66 and NEMA 4X for use in washdown and corrosive environments and have a Hastelloy diaphragm to resist harsh chemicals.

These transmitters typically connect using two wires to send a 4-20mA current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices. They can also be configured using three or four wires.

Safely monitor liquid, gas, and steam pressure in hazardous locations with these transmitters. They meet NEC safety standards, so they protect against an explosion where flammable gases and vapors are present.

These transmitters automatically compensate for error created by vibration or fluctuations in temperature, so there’s no need to account for these factors when programming your receiving device. Use the keypad to set the pressure range, choose the unit of measure, and zero the reading. They convert pressure into an electrical signal and send it to your receiving devices, such as remote displays, programmable logic controllers (PLCs), and motor speed controls to monitor pressure or control equipment. Transmitters will only provide accurate readings within the rated pressure range.

All transmitters are rated IP66 and NEMA 4X to protect against dirt, dust, washdowns, weather, and corrosion, and their Hastelloy connection resists harsh chemicals.

These transmitters typically connect using two wires to send a 4-20mA current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices. They can also be configured using three or four wires.

These transmitters automatically compensate for error introduced into both pressure and vacuum measurements by vibrations as well as temperature fluctuations, so you do not need to program corrections for these factors into your receiving device. Use the keypad to set the pressure range, choose the unit of measure, and zero the transmitter. Transmitters convert pressure and vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment. They will only provide accurate readings within the rated pressure or vacuum range.

All transmitters meet IP66 and NEMA 4X for use in washdown environments and have a Hastelloy diaphragm to resist harsh chemicals.

These transmitters typically connect using two wires to send a 4-20mA current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices. They can also be configured using three or four wires.

Used in hazardous locations, these transmitters safely convert pressure and vacuum into an electrical signal to measure liquids, gases, and steam. NEC rated for safety, these transmitters are explosion proof, so they can be used in environments containing flammable gases and vapors.

These transmitters automatically compensate for error in both pressure and vacuum measurements caused by vibrations and temperature fluctuations, so you don’t need to separately program corrections into your receiving device. Use the keypad to set the pressure or vacuum range, choose the unit of measure, and zero the transmitter. These transmitters convert pressure and vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers (PLCs), and motor speed controls, to control equipment or monitor pressure. Transmitters will only provide accurate readings within the rated pressure or vacuum range.

Rated NEMA 4X and IP66, they protect against dirt, dust, rust, harsh weather, and washdowns, and their Hastelloy connection resists corrosive chemicals.

These transmitters commonly connect using two wires to send a 4-20mA current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices. Three- and four-wire configurations are also possible.

View readings at the source with the dial indicator or remotely using a receiver—these transmitters measure the difference in pressure between two inputs in liquid applications. The dial indicator operates independently of the transmitter and shows differential pressure in real time for troubleshooting. Also known as transducers, these transmitters convert pressure to an electrical signal that is interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls. You’ll sometimes see them used to indicate a filter is clogged in a pump or cooling system. Rated NEMA 4X, these transmitters protect against dirt, washdown, and corrosion. They are also rated IP65 for protection from dust and rinsing. All are CSA certified, so they meet Canadian safety standards.

For your receiving device to interpret the signal from the transmitter, you will need to calibrate it for the transmitter's differential pressure range and output signal. As differential pressure increases, the output signal from the transmitter will increase. Transmitters will only provide accurate readings within the rated pressure range. Connect them using two wires. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices.

Used with pumps, cooling systems, and other liquid applications, these transmitters remotely measure the difference in pressure between two inputs. They are also known as transducers. These transmitters convert differential pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment. You’ll often see them used to indicate a filter is clogged.

For your receiving device to interpret the signal from the transmitter, you will need to calibrate it for the transmitter's differential pressure range and output signal. Transmitters will only provide accurate readings within the rated pressure range. Connect them using two wires. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices.

IP66 rated transmitters are dust tight and protect against washdowns. NEMA 4X rated transmitters protect against weather, washdowns, and corrosion.

At least twice as accurate as standard transmitters, these transmitters sense differential pressure at an accuracy of ±0.25%. Use them in laboratories or testing applications where the difference in pressure between two points needs to be measured with high accuracy. These transmitters are often used to indicate a filter is clogged or help you maintain a certain pressure in pumps, HVAC, cooling, and other air and liquid systems. They convert differential pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment. All transmitters are rated NEMA 4 for protection in washdown environments.

For your receiving device to interpret the signal from the transmitter, you will need to calibrate it for the pressure range and output signal of the transmitter. As the differential increases, the output signal from the transmitter will increase. Transmitters will only provide accurate readings within the rated pressure range. Connect them using two wires. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices.

Not only do these gauges have an accuracy of ±0.25%, they also have a four-digit LCD display that allows for easy reading of measurements. Use them for testing, calibrating, laboratory applications, and other critical applications that require precision.

Gauges with 4-20mA current output convert pressure to an electrical signal for remote monitoring.