Reach for this neoprene rubber hose to handle processes requiring high-pressure, high-temperature washdowns.

The cover on this hose meets MSHA (Mine Safety and Health Administration) standards for flame resistance.

Lighter than standard EPDM water hose, this PVC/Buna-N hose connects to a male threaded fitting on one end and a female one on the other.

Made of SBR rubber, this hose and its cover are tough enough to resist wear and tear.

Wash down equipment in food-processing plants, dairies, and other facilities with hot water.

With fittings already attached, it’s easy to connect this hose to a washdown station and wash gun.

Made of high-purity PVC with 303 stainless steel fittings, this hose won’t contaminate water. It’s often used to transfer deionized water in applications such as semiconductor manufacturing.

Made of high-purity PVC with 316 stainless steel fittings, this hose won’t contaminate water. It’s often used to transfer deionized water in applications such as semiconductor manufacturing.

Transfer and spray water at low pressures.

Protect your hose when it's not in use.

Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.

When your process requires hot water, reach for this rubber hose.

Hose is made of lightweight, nonmarring PVC.

Hose blends the flexibility of PVC with the durability and abrasion resistance of rubber.

Let go of this hose and it retracts back to its original coiled form.

If you need to access your line frequently, the fittings on this hose connect and disconnect quickly.

Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose.

Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging.

Differentiate your hose by color. The abrasion-resistant polyester cover on this hose comes in red, white, or yellow.

Also known as pin-rack hose, this hose can be folded to fit in a rack.

This general purpose tubing is the industry standard for air and water applications.

This tubing won’t degrade when exposed to the damaging effects of UV light.

Thick walls give this tubing excellent abrasion resistance.

Protect sensitive equipment with this tubing—it is specially formulated to reduce the buildup of static electricity.

Lightweight, spongy walls provide thermal insulation, so this tubing won’t produce condensation when cold air or fluid runs through it.

With a unique combination of UV resistance and clarity, this tubing won’t degrade from the damaging effects of ultraviolet light exposure, and allows you to monitor flow through the line.

With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.

Keep your work site safe and clutter free–this coiled tubing extends when you need it and retracts out of the way when you don't.

A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.

This self-extinguishing tubing meets UL 94 V-0 or UL 94 V-2 for flame retardance to delay the spread of flames to valuable equipment.

Made of moisture-resistant plastic, this tubing won't soften and lose strength, even in high-humidity environments.

This resilient tubing won’t crack due to stress or impact.

This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.

This tubing has hard walls like copper tubing, but is lighter in weight and easier to install. It connects to fittings with no heat or soldering required. Tubing meets NSF/ANSI Standard 61 for drinking water.

You don’t have to worry about this tubing cracking due to stress or impact—even over a wide range of temperatures.

Hard walls give this tubing excellent strength in high-pressure and vacuum applications.

Not only can this tubing handle temperatures between -450° F and 500° F, it also has a convoluted spiral design for good flexibility and smooth flow.

Commonly used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle continuous bending and flexing.

Keep your work site safe and clutter free—this coiled tubing extends when you need it and retracts out of the way when you don't.

Made of highly chemical-resistant materials, this tubing withstands harsh chemicals such as hydrochloric acid, sodium hydroxide, and sulfuric acid.

Run chemicals through this tubing at temperatures between -100° F and 500° F.

Not only is this tubing cured with platinum and free of plasticizers like DEHP, it can handle higher temperatures than any of our other high-purity soft tubing. Use in applications up to 450° F.

With hard walls and the ability to handle extreme temperatures, this tubing is the preferred material for semiconductor applications. The material contains extremely low levels of additives, so it won’t contaminate the fluid passing through it.

Made from TPE plastic, this tubing doesn’t contain plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through.

This tubing has a seamless construction with no weld bead for unrestricted flow and is stronger than welded tubing.

This tubing is made to tighter tolerances than other stainless steel tubing.

A titanium additive gives this tubing excellent strength and superior corrosion resistance. It meets MIL-T-8808.

Polished to a 10 Ra finish on the inside, this tubing has the smoothest interior of any tubing we offer. It is commonly used in semiconductor applications.

The outside of this tubing is polished to a high-luster finish for a shiny appearance.

Also known as hypodermic or needle tubing, this tubing has thin walls and is made to tight tolerances for use in precision applications.

This tubing can withstand temperatures up to 1200° F—the highest temperature rating of all the non-stainless steel tubing we offer. It is also known as Inconel.

Unlike other aluminum tubing, this tubing is rigid and will not bend.

Bend this tubing into the shape you need without special tools or elbow fittings.

This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside. It is also known as refrigeration and air conditioning tubing.

This Type K tubing has the thickest walls of all our copper tubing for drinking water. It withstands pressures up to 1,900 psi.

This Type L tubing has thicker walls than Type M tubing. It withstands pressures up to 1,500 psi.