Use these primers in enclosed occupied areas, such as hospitals, schools, and offices. They cover stains and prepare your surface, extending the life of paint and coatings. Apply with a brush, roller, or sprayer.

Acrylic primer prepares surfaces for paint.

Epoxy primer prepares surfaces for epoxy coatings. The size listed is the combined total of the two parts.

Increase paint’s ability to bond to hard, smooth surfaces, such as tile and metal.

Acrylic primer is often used on previously painted hard, slick, or glossy surfaces. Use it indoors or out. Apply with a brush, roller, or sprayer.

Epoxy primer is designed for use on floors to improve the longevity of paint and coatings. This low-odor primer can be used in enclosed occupied areas. For indoor use only. The size listed is the combined total of the two parts. Apply with a brush or roller.

Add long-term corrosion protection to uncoated or rusty metal surfaces. These primers prepare your surface to extend the life of paint and coatings. Apply with a brush, roller, or sprayer.

Acrylic primers are available in two colors. Choose gray primer for light-colored topcoats; red for dark topcoats.

Polyurethane primers can be applied in environments with high humidity or extreme temperatures. Surface must be visibly dry and free of frost and ice.

Get the power of a two-part epoxy primer in an easy-to-use aerosol can. These primers have excellent chemical and corrosion resistance. Spray them on uncoated or rusty metal to extend the life of paint and coatings. The two parts are contained in the same can; after activating, epoxy is usable for up to four days.

Protect steel and iron parts from corrosion without having to remove the primer before welding them together. Often used on structural steel in demanding environments, these primers can be welded through without affecting the weld’s integrity.

Apply primers in a can with a brush or sprayer.

Product labeling requirements restrict sales to the listed areas.

These primers convert rust into a layer of protection that prevents new rust from forming. Use them to prepare your surface to extend the life of paint and coatings.

Apply coatings in a can with a brush, roller, or sprayer.

These primers stand up to marine exposure and salt spray. Use them to prepare your surface to extend the life of paint and coatings.

Prepare metal surfaces for powder coating. These primers create a base layer that bonds with your top coat to extend the life of your powder coating. Use a powder coating sprayer to apply these primers directly to unpainted metal and cure in an oven.

Epoxy primers are good general purpose primers for most metal.

Zinc/epoxy primers have excellent corrosion resistance, so they’re often used to protect metal that rusts easily, such as steel and cast iron.

Use these primers on your surface before antislip coatings to maximize longevity. They do not contain grit. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

A high concentration of zinc gives these primers excellent corrosion resistance for protecting steel—when exposed to moisture and chemicals, the zinc rusts before the underlying steel can. They’re often used with structural steel to prepare the surface for paint while forming a protective layer. Apply with a brush, roller, or sprayer.

Polyurethane primers can be applied in environments with high humidity. They allow underlying moisture to escape while preventing additional water from getting in. Surface must be visibly dry and free of frost and ice.

Epoxy primers have excellent abrasion resistance. The container size listed is the combined total of the three parts.

Use these primers on metal surfaces in enclosed occupied areas, such as hospitals, schools, and offices. They have excellent resistance to moisture and corrosion and bond well to metal to extend the life of paint and coatings. Apply with a brush, roller, or sprayer.

Also known as block filler, these primers fill cracks and smooth surface irregularities. Use them to prepare concrete floors to extend the life of paint and coatings. Apply with a brush, roller, or sprayer.

These thin primers penetrate deeply into concrete floors to create a hard surface that can then be coated with any urethane or epoxy coating. Primers resist abrasion and chemicals, such as mild acids, alkalies, salt, and fuel. Apply with a roller. The size listed is the combined total of the two parts.

Use these primers on concrete floors before antislip coatings to maximize longevity. They do not contain grit. Apply with a brush or roller. The size listed is the combined total of the two parts.