Mount these fixtures where you need light but don't have an electrical connection. They turn on when movement is detected and off when an area is unoccupied, so they work well in hallways and small storage areas. Long-lasting and energy efficient, these lights have built-in LEDs. They emit a neutral white light often found in workspaces. A prismatic, frosted lens disperses light evenly.

Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. They are CSA certified for hazardous locations where flammable/combustible gases, vapors, and liquids may be present. They are rated NEMA 4X for protection against corrosion and washdowns. Lights are sealed to keep moisture out. They can be hardwired to operate on any of the voltages listed. Some work with LED or incandescent bulbs (sold separately).

Styles 4 and 7 can be used in environments where ignitable concentrations of hazardous material are present under normal operating conditions, and/or during frequent equipment maintenance or failure. Rated for Class I, Divisions 1 and 2, Groups C and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2, these lights withstand ethylene, propane, conductive or metal dusts, carbonaceous dusts, nonconductive dusts, and combustible/ignitable fibers or flyings.

The prismatic, wraparound lens disperses light evenly from the sides as well as the bottom. A seal between the lens and housing keeps out humidity and dripping, splashing, and falling liquids. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They emit a neutral white light often found in workspaces. Lights can be hardwired to operate on any of the voltages listed.

Also known as wall packs, these lights mount to exterior walls to illuminate building perimeters, entryways, loading docks, and other outdoor areas. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other technologies. They produce a neutral white light appearance. The lens is prismatic to disperse light evenly, and made of durable, impact-resistant polycarbonate.

IIlluminate outdoor areas and objects such as parking lots, flag poles, and signs. These lights can be hardwired to operate on any of the voltages listed. All have built-in LEDs. They last longer, are more efficient, and generate less heat than other technologies.

Style C lights emit a neutral white light.

Lights with a polycarbonate lens are more durable and impact resistant than other lenses, but they may turn yellow over time.

Style C lights include hardware for mounting to poles with an OD up to 4".

Also known as wall packs, these lights mount to exterior walls and ceilings. With built-in LEDs, they last longer, are more efficient, and generate less heat than other technologies. They can be hardwired to operate on any of the voltages listed. All have a prismatic lens that disperses light evenly.

Lights with a cool light appearance highlight white/blue tones creating good visibility at night.

Set 120W and 80W lights to cool, neutral, or warm color appearances.

Ceiling-mount lights are also known as canopy lights.

Lights with a polycarbonate lens are more impact resistant than lights with a glass lens.

Lights that cannot be sold to California or Oregon are restricted due to energy efficiency requirements.

When the power goes out, these lights go on. These backup lights have built-in LEDs so they last longer, are more efficient, and generate less heat than other technologies. Rated for use in damp locations, these lights withstand exposure to humidity and moisture. Lights can be hardwired to operate on any of the voltages listed. They have a low-voltage disconnect so they won’t drain the backup battery. Use the test switch to check that the heads and battery are working properly. Heads adjust to any angle to direct light where needed.

Lights with a plastic housing resist corrosion better than lights with a steel housing.