These kits include a set of red and black Fluke test leads with a variety of interchangeable tips.

Adapt Fluke test leads to perform electrical tests in tight spaces.

Pairs of red and black test leads are ready to connect to a multimeter or other electrical test equipment.

Measure current without interrupting the circuit by connecting these test leads to a multimeter or current meter.

Perform electrical tests with a set of red and black test leads and interchangeable tips.

Connect oscilloscopes and other bench-top testers.

Test equipment that draws more than 10 amps of current. These clips are spring loaded to hold tight for hands-free testing.

Convert a test lead tip style to take a new electrical measurement without switching test leads.

Mount these sockets to fixtures, attach wire from your electrical testing equipment, and add Spring Test Probes to create automated systems to test continuity in circuit boards.

Free up your hands while using your Fluke multimeter by suspending it from this hanger.

Measure the temperature of liquids and gases without damaging the probe on these transmitters. An included thermowell shields the probe from vibration, corrosion, and shocks in tanks and pipes.

Safely measure the temperature of liquids and gases wherever flammable gases, dust, and fibers are present.

Remotely monitor the temperature of liquids and gases in hard-to-access, hot, and high-vibration areas.

The included thermowell protects the probe from vibration, corrosion, and shock in tanks and pipelines.

Trim these probes to the exact length you need with a pipe cutter.

The probe tips come attached to mounting connections for fast installation.

Often used with thermocouple thermometers, these probes have a handle for a comfortable grip.

Pierce pliable plastics, rubber, and other soft solids to check the internal temperature.

The armored stainless steel cable resists wear, abrasion, and corrosion in humid and harsh conditions.

Monitor your system’s temperatures directly from your smart device. These battery-powered transmitters send data to smartphones and tablets via Bluetooth, so you can easily confirm your processes are functioning properly. Good for route-based monitoring and preventative maintenance.

Convert round-pin male connectors to flat-pin male connectors.

Send temperature readings directly to programmable logic controllers (PLCs)—with a built-in transmitter, these RTDs don’t require a separate signal converter. They’re threaded, so they’re ready to install into containers, tanks, and pipes.

Use a pipe cutter to trim these probes for an exact fit.

View temperature readings and adjust settings directly on these RTD probe transmitters.

For fast installation, the tips of these RTD probes come attached to mounting connections.

Use these RTD probes for more stable air-temperature readings than thermocouple probes.

Check the temperature of liquids in hygienic applications such as food or pharmaceutical lines and tanks.

To protect thermometers and temperature probes in steam lines and other high-temperature and high-pressure applications, these thermowells weld into place for a more secure connection than threaded thermowells.

The extra-long nut on these thermowells lets you install thermometers and temperature probes through thick insulation.

Designed for use with thermocouples and RTDs in large, nonpressurized tanks, these protection tubes are available in long lengths at a lower cost than thermowells.

Adapt unthreaded thermocouple and RTD connections for use with threaded tanks and connection heads.

To protect these switches from splashing water, corrosive liquid, and dust, the housing meets NEMA 4X for washdown conditions.

Since these switches don’t have a housing above the probe, they are often used in tight spaces and low-clearance areas.

To control heating equipment in washdown environments with splashing water, corrosive liquid, and dust, these switches have a housing that meets NEMA 4X.

Often used in hazardous locations, such as chemical plants, refineries, and grain elevators, these switches have a housing that’s UL listed for environments with flammable gases, combustible dust, and ignitable fibers.

Install directly into drilled and reamed holes.

Thanks to the nickel-plated brass base on these needles, they can be cleaned, washed, boiled, or sterilized.

The nonstick surface is good for liquids that tend to clog, such as instant-bonding adhesives.

Connect these needles to adhesive cartridges, grease guns, and other dispensers with a threaded connection.

Dispense fluid from syringes and other small instruments with luer lock connections.

Use these components to create an air-powered dispensing system. A foot pedal controls the amount released.

Cover syringe tips when not in use to protect them and prevent leaks.

Pump the handle to draw liquid out of a tank or drum through a hose into sample bottles. Only the hose and hose weight come into contact with the liquid, reducing the possibility of cross contamination.

Connect measuring tools with SPC data output to miniprocessors and multiplexers.

The flat sensing tip resists deposit buildup and breakage for a long service life in harsh conditions.

Don’t strain your eyes reading a scale—these bench-top meters indicate exact results on the digital display.

Test temperature, chemical concentration, contamination, and salt levels in liquid from up to 6 ft. away, then send the results to your computer for analysis.

Transmit pH readings to a PC for analysis. These meters have a sensor on a 6-ft. cable for taking remote readings of water and other clean liquids.

Check pH in harsh field conditions. These floating meters that have a housing that meets IP67 for complete resistance to dust and protection from temporary submersion.

Check the oxygen levels of water and other clean liquids in harsh field conditions. This meter has a housing that meets IP67 for complete resistance to dust and protection from temporary submersion.

Since these meters float and have a housing that meets IP67, they won’t be damaged by temporary submersion and have complete resistance to dust. They detect total dissolved solids (TDS) in water, hydroponic solutions, and other clean liquids to determine contaminant levels.

Sets include a handle and an assortment of tips for holding and positioning wire, springs, and other small parts.

Sets include an assortment of handles and tips for pulling material out of tight spots. Replace tips when they become worn or to use a different style.