Filter by
Manufacturer Model Number
Stem Material
Material
Body Material
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Probe Break Stems
 |
Customize your Renishaw probe stylus setup. Probe break stems install between your probe and your probe stylus, and are designed to snap if your probe applies too much pressure on a workpiece, shielding the probe and your stylus from damage.
Note: Adding a probe break stem makes the joint between your probe stylus and probe less rigid, increasing the risk of measurement errors from the stylus bending.
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Overall Lg., mm | Stem Dia., mm | Stem | Body | Mfr. | Mfr. Model No. | Each | |||
M3 × 0.5 mm | |||||||||
| 13.3 | 7 | Stainless Steel | Stainless Steel | Renishaw | A-5004-7616 | 85175A615 | 000000 | ||
M4 × 0.7 mm | |||||||||
| 8 | 6.92 | Stainless Steel | Stainless Steel | Renishaw | A-5004-7598 | 85175A592 | 0000 | ||
| 12 | 6.9 | Stainless Steel | Stainless Steel | Renishaw | A-5004-7621 | 85175A582 | 00000 | ||
| 15 | 3.92 | Steel | Steel | Renishaw | A-5004-7443 | 85175A564 | 00000 | ||
| 16 | 3.4 | Stainless Steel | Stainless Steel | Renishaw | A-5004-6723 | 85175A619 | 00000 | ||
Probe Break Stem Installation Kits
|  |
Probe break stem installation kits include all the components needed to properly align and replace the break stem on a tool-setting probe. Probe break stems are designed to snap if your probe applies too much pressure on a workpiece, shielding the probe from damage.
Material | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pieces | Includes | Overall Lg., mm | Stem Dia., mm | Stem | Body | Mfr. | Mfr. Model No. | Each | |||
M4 × 0.7 mm | |||||||||||
| 11 | One Break Stem One Support Bar One Captive Link Two L-Keys One Wrench Five Screws | 15.2 | 3.9 | Stainless Steel | Stainless Steel | Renishaw | A-5003-5171 | 85175A569 | 000000 | ||
Probe Stylus Installation Tools
 |
Stylus installation tools give you a handle to turn so it’s easier to thread a stylus into your probe. Slide them into the hole at the top of your probe stylus.
