We will reply to your message within an hour.
More
Thanks to the nickel-plated brass base on these needles, they can be cleaned, washed, boiled, or sterilized.
These flexible needles can be cut to length.
The nonstick surface is good for liquids that tend to clog, such as instant-bonding adhesives.
Connect these needles to adhesive cartridges, grease guns, and other dispensers with a threaded connection.
The needles in these sets connect to adhesive cartridges, grease guns, and other dispensers with threaded connections.
Dispense fluid from syringes and other small instruments with luer lock connections.
Often used to spread adhesives when attached to syringes and dispensers with a luer lock connection.
Use these components to create an air-powered dispensing system. A foot pedal controls the amount released.
Transfer liquid from one container to another, without contamination or spilling, by inserting the needle through each lid.
Sterilized so they won’t contaminate your samples or lines, these liquid samplers are often used in food processing, pharmaceutical, and biotech applications.
Adapt Fluke test leads to perform electrical tests in tight spaces.
Similar to dental instruments, these needle-sharp picks are suitable for work around delicate circuits and components.
The assorted needle-sharp picks in these sets are similar to dental instruments and suitable for work around delicate circuits and components.
Obtain more precise and reliable liquid and gas temperature measurements than thermocouple probes.
Use a pipe cutter to trim these probes for an exact fit.
To protect the probe from vibration, corrosion, and shock, these RTD probes come with a thermowell.
For long service life in harsh conditions, these RTD probes have an armored stainless steel cable to protect wiring from corrosion, abrasion, and impact.
View temperature readings and adjust settings directly on these RTD probe transmitters.
Send temperature readings directly to programmable logic controllers (PLCs)—with a built-in transmitter, these RTDs don’t require a separate signal converter. They’re threaded, so they’re ready to install into containers, tanks, and pipes.
Often used to measure temperature in water lines and low-pressure steam lines, these RTDs have an NPT male probe connection for easy installation in pipes, tanks, and thermowells.
A built-in transmitter converts the probe’s air-temperature readings to a 4-20 mA signal for use with switches, controllers, and data loggers.
For fast installation, the tips of these RTD probes come attached to mounting connections.
Check the temperature of liquids in hygienic applications such as food or pharmaceutical lines and tanks.
Designed for clean-in-place applications such as dairy processing and food-preparation areas, these 3-A certified RTDs have a sanitary quick-clamp probe connection for easy removal.
Use these RTD probes for more stable air-temperature readings than thermocouple probes.
To monitor the internal temperature of soft solids in humid conditions and harsh environments, these thermocouple probes have an armored stainless steel cable that protects wiring from corrosion and damage.
Remotely monitor the temperature of liquids and gases in hard-to-access, hot, and high-vibration areas.
Send temperature readings from tanks, containers, and pipes to devices such as remote displays and programmable logic controllers (PLCs) without the need for a separate thermocouple transmitter.
Monitor your system’s temperatures directly from your smart device. These battery-powered transmitters send data to smartphones and tablets via Bluetooth, so you can easily confirm your processes are functioning properly. Good for route-based monitoring and preventative maintenance.
Trim these probes to the exact length you need with a pipe cutter.
Pierce pliable plastics, rubber, and other soft solids to check the internal temperature.
Measure the temperature of liquids and gases without damaging the probe on these transmitters. An included thermowell shields the probe from vibration, corrosion, and shocks in tanks and pipes.
Safely measure the temperature of liquids and gases wherever flammable gases, dust, and fibers are present.
The armored stainless steel cable resists wear, abrasion, and corrosion in humid and harsh conditions.
To withstand harsh environments, a protective head seals out dust and moisture and thick probe walls reduce wear on the sensing element.
Bend these probes up to 90° for a custom fit.
Touch the exposed probe tip to your surface for a quick reading.
Protect thermocouple wiring from wear and corrosion with an armored stainless steel cable.
For easy installation in thermowells, tanks, pipes, and other closed vessels, these thermocouples have an NPT male probe connection.
The probe tips come attached to mounting connections for fast installation.
Often used with thermocouple thermometers, these probes have a handle for a comfortable grip.
Thick wire with ceramic insulation stands up to extreme air temperatures in forging, die casting, and heat treating.
The included thermowell protects the probe from vibration, corrosion, and shock in tanks and pipelines.
An armored stainless steel cable protects wiring from corrosion and damage in humid conditions and harsh environments.
Remotely check temperature on the go. These thermometers have a magnetic-back display for temporary mounting and a thermocouple probe with a 5-ft. coiled cable.
A remote probe extends your reach in hard-to-access areas. These thermometers come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.
For more accurate and consistent readings than thermometers with thermocouple probes and a longer service life, this thermometer has a resistance temperature detector (RTD) probe.
For a longer service life than thermocouple probes and more consistent readings over time, these thermometers have a resistance temperature detector (RTD) probe. They come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.
A water-resistant housing and rubberized keypad stand up to washdown conditions and outdoor use.
For use in food-processing applications, this thermometer meets NSF/ANSI standards and includes a thermocouple probe with a pointed tip to pierce dense meats and frozen foods.
About half the size of standard temperature chart recorders, these are often used to monitor temperature inside refrigerators, incubators, storage compartments, and other small spaces.
Record temperature in hard-to-access areas. This recorder has a remote probe on a 15-ft. cable.
No cords or software required—this data recorder stores readings on an included SD card in Excel format for transfer to a PC.
Track ambient temperature and humidity over time with this recorder that includes a calibration certificate traceable to NIST that states it has passed a test for accuracy.
Monitor temperature and pressure in hard-to-access system components with this data recorder that has remote sensors that track and store readings for upload to a PC.
To alert you of temperature fluctuations, this recorder sounds an alarm and flashes the display when temperature rises above or falls below the programmable temperature range. It has a probe on a 4-ft. cable for taking readings in hard-to-access areas.
Remotely record temperature, humidity, and dew point up to 10 feet from the display and set the alarm to sound and flash the display if temperature readings rise above or fall below a set range.
Monitor pH readings from your smartphone or tablet—download the app to view data up to 160 ft. away using Bluetooth.