McMaster-Carr logo
    Filter by
    For Use Outdoors
    Reaches Full Strength
    Process After Hardening
    Mixing Required
    Clarity
    Thickness
    Container Net Weight
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Mix Ratio
    Environment
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    16 Products

    High-Flow Leak-Stopping Concrete Crack Fillers

    Image of Product. Front orientation. Surface Fillers. High-Flow Leak-Stopping Concrete Crack Fillers .
    Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink. When fully cured they create a seal that can withstand pressure of up to 2,000 psi. Apply with a dispensing gun (sold separately). The size listed is the combined total of the two parts. A mixer nozzle is included.
    Container
    Size, fl.
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, min.
    Consistency
    Mixing
    Req.
    For Max.
    Crack Wd.
    Contains
    Aggregate
    Approx. Linear
    Coverage @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Application
    Temp. Range, ° F
    Color
    Process After
    Hardening
    For Use On
    Each
    Polyurethane Rubber Surface Fillers
    20.2Cartridge360Thin LiquidNo3/4"No5 ft. @ 1/2"1/2"Yes35 to 90AmberDrill, Sand, SawCeramic, Porcelain, Grout, Concrete, Masonry, Stone, Asphalt000000000000
     
    Surface Filler Dispensing Guns
    Each
    Dispensing Gun000000000000

    Protective Coatings for Grout

    Spray these coatings on grout to form a barrier against dirt, water, mildew, and discoloration.
    Silicone Rubber—Spray Bottle
    Image of Product. Front orientation. Protective Coatings. Protective Coatings for Grout.
    Dry
    Time, hr.
    Container
    Size, fl. oz.
    Solution
    Type
    Touch
    Overall
    Approx. Coverage,
    ft²
    Mixing
    Req.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    For Use
    Outdoors
    For Use
    On
    Includes
    Color
    Each
    22Water Based224200No8050 to 80NoGroutTrigger SprayerFlat Clear0000000000000
     

    Leak-Stopping Concrete Crack Fillers

    Image of Product. Front orientation. Surface Fillers. Leak-Stopping Concrete Crack Fillers, Polyurethane Rubber, Cartridge.

    Polyurethane Rubber

    Cartridge

    Stop slow-flowing and weeping leaks in concrete. These crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.
    Polyurethane Rubber—Polyurethane rubber fillers are thin to penetrate deep into cracks. When fully cured they create a seal that can withstand pressure of up to 2,000 psi. Apply with a standard caulk gun (sold separately). For especially large cracks, use a packer (sold separately) with a grease gun or a grout pump.
    Container
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    For Max.
    Crack Wd.
    Contains
    Aggregate
    Approx. Linear
    Coverage @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Application
    Temp. Range, ° F
    Color
    Process After
    Hardening
    For Use On
    Each
    Polyurethane Rubber Surface Fillers
    10.1Cartridge324Thin LiquidNo3/4"No15 ft. @ 1/2"1/2"Yes35 to 90AmberSandCeramic, Porcelain, Grout, Concrete, Masonry, Stone, Asphalt000000000000
     
    Packers for Polyurethane Rubber Surface Fillers
    Material
    For Hole
    Dia.
    Each
    Steel5/8"00000000000

    Epoxy Grout

    Image of Product. Front orientation. Surface Fillers. Epoxy Grout.
    Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals, such as acids, alkalies, salt water, and common solvents and cleaners. Its lightweight formula makes this grout easy to spread. Use in horizontal or vertical joints—grout won’t sag or shrink. Apply with a grout float. It can be cleaned up with water when wet; it doesn’t require a sealer once it cures. The size listed is the combined total of the two parts.
    Container
    Net Wt.,
    lb.
    Type
    Begins to
    Harden, hr.
    Reaches Full
    Strength, day
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    For Max.
    Crack Wd.
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Application
    Temp. Range, ° F
    Color
    For Use On
    Each
    Epoxy Surface Fillers
    1.3Pail73Thick LiquidYes1:11/2"95 ft² @ 1/4"1/2"Yes70 to 85BlackPlaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone000000000000000
    1.3Pail73Thick LiquidYes1:11/2"95 ft² @ 1/4"1/2"Yes70 to 85BrownPlaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone00000000000000
    1.3Pail73Thick LiquidYes1:11/2"95 ft² @ 1/4"1/2"Yes70 to 85WhitePlaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone00000000000000
     

    Grout

    Image of Product. Front orientation. Surface Fillers. Grout.
    Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring. Apply with a grout float.
    Acrylic Plastic—Acrylic plastic grout does not require mixing. It resists shrinking, cracking, and staining.
    Container
    Size,
    gal.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    For Max.
    Crack Wd.
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Application
    Temp. Range, ° F
    Color
    For Use On
    Each
    Acrylic Plastic Surface Fillers
    1Pail1524PasteNo1/2"101 ft² @ 1/4"1/2"No50 to 100BeigePlaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Asphalt00000000000000
    1Pail1524PasteNo1/2"101 ft² @ 1/4"1/2"No50 to 100GrayPlaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Asphalt0000000000000
    1Pail1524PasteNo1/2"101 ft² @ 1/4"1/2"No50 to 100WhitePlaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Asphalt0000000000000
     

    Water-Resistant Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Can, Jar.
    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Tube.
    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Jar, Bottle.

    Epoxy

    Can, Jar

    Epoxy

    Tube

    Epoxy

    Jar, Bottle

    Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
    Paste—Paste fillers resist alkalies, solvents, gasoline, and oil.
    Container
    Temp.
    Range
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.,
    ° F
    Color
    Process After Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    2Tube560 min.PasteYes1:112 in² @ 1/4"1/2"YesNot Rated200GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood0000000000000
    2Jar, Bottle2024 hr.PasteYes5:18 1/2 in² @ 1/4"1 1/2"YesNot Rated185WhiteMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
    2Jar, Bottle2024 hr.PasteYes5:18 1/2 in² @ 1/4"1 1/2"YesNot Rated250GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
    14Can, Jar2024 hr.PasteYes5:162 in² @ 1/4"1 1/2"YesNot Rated185WhiteMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
    14Can, Jar2024 hr.PasteYes5:162 in² @ 1/4"1 1/2"YesNot Rated250GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
     
    back to top