Protective Coatings For Stone

Filter by

Container Type

Color

Formulation

Material

System of Measurement

Maximum Temperature

Type

Container Size

For Use Outdoors

Performance

Appearance

Mixing Required

Solution Type

Environment

Consistency

Maximum Application Temperature

75° F to 99° F

100° F to 124° F

Not Rated

Approximate Coverage @ Thickness

RoHS

Reaches Full Strength

REACH

Overall Dry Time

Minimum Application Temperature

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

77 Products

Protective Coatings

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Rubber—Can

Rubber coatings withstand salt and acids.

Coatings in a can can be dipped, brushed, or sprayed.

Topcoats—Apply topcoat to give coated surfaces a glossy finish that resists fading. They cannot be sold outside of the United States due to product regulations.

Coatings													Topcoats
		Dry Time
Container Size, gal.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Choose a Color		Each		Each



	1	Solvent Based	20	4	90 ft² @ 5 mil	No	200	50 to 90	Yes	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	Semi-Gloss Black, Semi-Gloss Blue, Semi-Gloss Red, Semi-Gloss Yellow	9560T45	0000000	9560T2	000000

PVC—Can

PVC coatings can be used on nearly any surface, including rubber. They withstand salt, acids, alkalies, and gasoline. They also resist UV light, so they won’t lose their color when exposed to sunlight over long periods of time.

Coatings in a can can be dipped, brushed, or sprayed.

		Dry Time
Container Size, gal.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	1	Solvent Based	30	24	60 ft² @ 5 mil	No	200	65 to 80	Yes	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	Semi-Gloss Black	2472N542	0000000


	1	Solvent Based	30	24	60 ft² @ 5 mil	No	200	65 to 80	Yes	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	Semi-Gloss Red	2472N541	000000
	1	Solvent Based	30	24	60 ft² @ 5 mil	No	200	65 to 80	Yes	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	Semi-Gloss Yellow	2472N543	000000

Antislip Protective Coatings

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Epoxy—Aerosol Can

		Dry Time
Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Choose a Color		Each



	12	Solvent Based	20	24	15 ft² @ 1 mil	No	250	50 to 90	Yes	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Iron, Galvanized Iron, Galvanized Steel, Fiberglass, Masonry, Concrete, Stone, Asphalt, Wood	Gloss Black, Gloss Clear, Gloss Dark Gray, Gloss Red, Gloss Yellow	63825T74	000000

Covers

		Each
Roller Cover for Solvent-Based Coatings	6439T73	00000

Epoxy—Can

Apply gallon-sized water-based coatings with a roller.

Water Based—Water-based epoxy coatings are clear and can be applied over nearly any surface, even old coatings, without altering their appearance. These two-part coatings come with a mixer that attaches to a hand-held drill and a roller cover to apply them once mixed. The size listed is the combined total of the two parts.

OSHA Compliant 29 CFR 1910.22—Coatings that comply with OSHA 29 CFR 1910.22 meet requirements for walking-working surfaces.

		Dry Time, min.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, min.	Max. Temp., ° F	Application Temp. Range, ° F	Specs. Met	For Use Outdoors	For Use On	Includes	Color		Each



	1	Water Based	27	30	185 ft² @ 38 mil	Yes	4:1	25	180	50 to 120	OSHA Compliant 29 CFR 1910.22	Yes	Aluminum, Brass, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall	Mixer, Roller Cover	Gloss Clear	6135T11	0000000

Covers

		Each
Roller Cover for Solvent-Based Coatings	6439T73	00000

Flexible Chemical-Resistant Protective Coatings

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures. Coatings resist acids, alkalies, fuels, and solvents, as well as temperatures as low as -40° F once cured. They can also be used as an adhesive for Viton® gaskets, O-rings, and seals.

Viton® Fluoroelastomer—Aerosol Can

		Dry Time
Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	12	Solvent Based	10	24	13 ft² @ 1 mil	No	400	60 to 90	Yes	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composite, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	Flat Black	7270T3	0000000

Viton® Fluoroelastomer Bottle and Can Coatings

Image of Product. Front orientation. Protective Coatings. Flexible Chemical-Resistant Protective Coatings, Viton® Fluoroelastomer Bottle and Can Coatings.

Apply coatings in a bottle and can with a brush or roller. The size listed is the combined total of the two parts.

		Dry Time
Container Size, qt.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	1	Solvent Based	10	24	70 ft² @ 1 mil	Yes	27:1	8	400	40 to 90	Yes	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composite, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	Flat Black	7270T4	0000000

Low-Friction Epoxy Protective Coatings

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within. These thick coatings can also be used in chutes and on foundations for a smooth, glossy surface that resists abrasion, chemicals, and extreme temperatures once cured. Apply with a brush or roller. The size listed is the combined total of the two parts.

Epoxy—Can

Image of Product. Front orientation. Protective Coatings. Low-Friction Epoxy Protective Coatings.

				Dry Time, hr.
	Mfr. Model No.	Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, min.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each
Loctite® Nordbak Chemical Resistant Coating Coatings



		PC 7319	1 1/2	Solvent Based	4	16	150 ft² @ 10 mil	Yes	2.3:1	25	245	65 to 80	Yes	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Composite, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	Gloss Gray	2493N1	0000000

High-Flow Leak-Stopping Concrete Crack Fillers

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink. When fully cured they create a seal that can withstand pressure of up to 2,000 psi. Apply with a dispensing gun (sold separately). The size listed is the combined total of the two parts. A mixer nozzle is included.

	Container
	Size, fl. oz.	Type	Begins to Harden, sec.	Reaches Full Strength, min.	Consistency	Mixing Req.	For Max. Crack Wd.	Contains Aggregate	Approx. Linear Coverage @ Thk.	Max. Thk.	For Use Outdoors	Application Temp. Range, ° F	Color	Process After Hardening	For Use On		Each
Polyurethane Rubber Surface Fillers



		20.2	Cartridge	3	60	Thin Liquid	No	3/4"	No	5 ft. @ 1/2"	1/2"	Yes	35 to 90	Amber	Drill, Sand, Saw	Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Asphalt	2382N1	000000

Surface Filler Dispensing Guns

		Each
Dispensing Gun	2382N4	000000

Oil-Resistant Fabric Coatings

Protect clothing, furniture, and other fabric with these oil- and water-repellent coatings. Also known as oleophobic and hydrophobic coatings, they work into a fabric’s individual fibers, repelling liquid and grease without altering its appearance, feel, or smell.

Container				Dry Time, hr.
Size, fl. oz.	Type	Solution Type	Approx. Coverage, ft²	Touch	Overall	Max. Temp., ° F	Application Temp. Range, ° F	For Use On	Color		Each



	8.5	Bottle	Water Based	125	2	48	300	40 to 120	Stone, Drywall, Wood, Canvas, Vinyl Fabric	Clear	2615N2	0000000

Roof Repair Mesh Fabric

Reinforce hot- and cold-applied asphalt patching compounds and coatings with this flexible fabric.

				Application Temp. Range
Lg., ft.	Wd.	Material	For Use Outdoors	Min.	Max.	Color	Specs. Met	For Use On		Each
50	6"	Asphalt-Coated Fiberglass Fabric	Yes	Not Rated	Not Rated	Black	ASTM D1668 Type I	Aluminum, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood	7574T5	000000

Temporary Roof Leak Patching Compounds

Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.

	Container
	Net Wt., lb.	Type	Consistency	Mixing Req.	For Max. Crack Wd.	Contains Aggregate	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Application Temp. Range, ° F	Color	For Use On		Each
Clay Surface Fillers



		25	Pail	Powder	No	1"	Yes	40 ft² @ 1/2"	Not Rated	Yes	35 to 100	Gray	Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood	7635T15	000000

Mortar Mixes

Used for brick, block, and stone laying as well as for repairing masonry, mortar mixes consist of fine sand and masonry cement. Mix it with water.

	Container
	Net Wt., lb.	Type	Begins to Harden, hr.	Reaches Full Strength, hr.	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Application Temp. Range, ° F	Color	For Use On		Each
Cement Surface Fillers



		60	Bag	4	24	Powder	Yes	8:1	25 ft² @ 1/4"	1/2"	Yes	40 to 90	Gray	Masonry, Stone	76805T104	000000

Magnet-Receptive Sheets


Sheets	Vinyl Plastic-Faced Sheets	Adhesive-Back Sheets

These sheets are made of rubber and iron oxide, letting you create a nonmetallic, nonmagnetic surface that magnets will stick to. Sheets can be cut with scissors to create custom shapes and sizes.

	Wd.	Thk. Tolerance	Wd. Tolerance	Temp. Range, ° F	Material	Bonded With	Color	For Use On	Max. Continuous Lg., ft.		Per Ft.
Sheets



	0.03"	24 3/8"	-0.002" to 0.002"	-0.03" to 0.03"	0 to 160	Iron Oxide	Rubber	Black	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	50	1086N11	00000


	Vinyl Plastic-Faced Sheets



			0.03"	24 3/8"	-0.002" to 0.002"	-0.03" to 0.03"	0 to 160	Iron Oxide	Rubber	White	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	50	1086N13	0000


			Adhesive-Back Sheets



					0.03"	24 3/8"	-0.002" to 0.002"	-0.03" to 0.03"	0 to 160	Iron Oxide	Rubber	Black	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	50	1086N12	0000

Roof Patching Compounds


Asphalt Pail	Can

Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.

Asphalt—Apply asphalt compounds to wet or dry surfaces.

Acrylic Plastic—Apply acrylic plastic compounds to dry surfaces.

	Container
	Size, gal.	Type	Begins to Harden	Reaches Full Strength	Consistency	Mixing Req.	Contains Aggregate	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Application Temp. Range, ° F	Color	Specs. Met	For Use On		Each
Asphalt Surface Fillers



		1	Can	60 min.	30 day	Thick Liquid	No	No	12 ft² @ 1/8"	1/2"	Yes	50 to 120	Black	ASTM D4586	Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood	7746T3	000000


		4.7	Pail	60 min.	30 day	Thick Liquid	No	No	56 ft² @ 1/8"	1/2"	Yes	50 to 120	Black	ASTM D4586	Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood	7746T4	00000


		Acrylic Plastic Surface Fillers



				1	Can	4 hr.	24 hr.	Thick Liquid	No	Yes	12 ft² @ 1/8"	1/4"	Yes	50 to 90	White	—	Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood	76405T16	00000

Flame-Retardant Protective Coatings

Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Epoxy—Can

Image of Product. Front orientation. Protective Coatings. Flame-Retardant Protective Coatings.

Clear—Clear coatings are frequently used on wood—use one coat on sealed wood and two on unsealed. They can be used outside without breaking down, but prolonged exposure to UV light may cause them to yellow.

White—White coatings are frequently used on walls, ceilings, doors, and stairwells.

		Dry Time, hr.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	Flammability Rating	For Use Outdoors	For Use On	Color		Each



	1	Water Based	8	48	150 ft² @ 10 mil	Yes	100:26	2.5	250	40 to 100	UL 94 V-0	Yes	Aluminum, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composite, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	Gloss Clear	2557N2	0000000


	1	Water Based	8	48	150 ft² @ 10 mil	Yes	100:20	2.5	300	40 to 100	UL 94 V-0	Yes	Aluminum, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composite, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	Gloss White	2557N1	000000

Goo Gone Paint and Coating Removers

Clean up water-based paint messes without damaging the surface underneath. In addition to wet and dry paint, these cleaners also remove varnish, shellac, and caulk. They cling to vertical surfaces, such as wood baseboards and trim, to easily remove spills and splatter. Use them on floors, brushes, tools, and ladders as well.

Note: Not for use on painted surfaces or PVC.

Spray Bottles

Image of Product. Front orientation. Paint and Coating Removers. Goo Gone Paint and Coating Removers.

Cannot Be Sold To—Removers that cannot be sold to the listed regions are restricted by product labeling requirements and/or import regulations.

							Each		Package
	Container Size, fl. oz.	Solution Type	Harshness	For Use On	For Removing	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
Liquids



		24	Water Based	Moderate	Aluminum, Carpet, Ceramic, Chrome, Fabric, Fiberglass, Galvanized Steel, Glass, Iron, Plastic, Porcelain, Stainless Steel, Steel, Stone, Vinyl Plastic, Waxed Floors	Caulk, Sealants, Latex-Based Paint	Canada	7984T339	000000	4	7984T875	000000

Protective Coatings for Masonry

Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water. Use them in exterior, above-grade vertical surfaces to minimize deterioration and to prevent salt deposits and surface stains. Apply with a brush or sprayer.

Silicone Rubber—Jug

Image of Product. Front orientation. Protective Coatings. Protective Coatings for Masonry.

		Dry Time
Container Size, gal.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	1	Water Based	30	72	210 ft² @ 1 mil	No	90	50 to 90	Yes	Masonry, Concrete, Stone	Flat Clear	2394N1	000000

Concrete Mixes

For use when thickness will be more than 2", concrete mixes consist of cement, sand, and gravel. Mix them with water. Concrete is ready for foot traffic when it reaches full strength.

	Container
	Net Wt., lb.	Type	Begins to Harden	Reaches Full Strength, hr.	Consistency	Mixing Req.	Mix Ratio	Contains Aggregate	Approx. Coverage @ Thk.	For Use Outdoors	Application Temp. Range, ° F	Color	Process After Hardening	For Use On		Each
Cement Surface Fillers



		40	Bag	4 hr.	24	Powder	Yes	5:1	Yes	1 1/2 ft² @ 2"	Yes	40 to 90	Gray	Drill, Sand, Saw, Tap	Concrete, Masonry, Stone	76805T83	00000


		50	Bag	20 min.	8	Powder	Yes	5:1	Yes	2 ft² @ 2"	Yes	40 to 90	Gray	Drill, Sand, Saw, Tap	Concrete, Masonry, Stone	76805T93	00000

Heavy Duty Roof Patching Compounds


Cans	Cartridges

These patching compounds are the most flexible and watertight we offer. Developed for use on flashing, chimneys, and high-stress areas, they are highly vibration resistant.

Cartridges—Dispense compounds in a cartridge in a standard caulk gun (sold separately).

Cannot Be Sold To—Compounds that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).

	Consistency	Begins to Harden, hr.	Reaches Full Strength	Approx. Coverage @ Thk.	Max. Thk.	Application Temp. Range, ° F	Color	For Use Outdoors	For Use On	Cannot Be Sold To		Each
Cans



	1 gal.	Paste	2	7 day	8 ft² @ 1/4"	1/8"	20 to 100	Black	Yes	Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	7568T53	000000


	Cartridges



			10.1 fl. oz.	Gel	12	24 hr.	1/2 ft² @ 1/4"	1/2"	40 to 120	Black	Yes	Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood	—	7568T51	00000

Large-Area Concrete Patching Compounds

Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds. Use them to fix pitted, worn, and cracked concrete floors, stairs, and loading docks. Compounds resist salt water, oil, and chemicals, and stand up to forklift and truck traffic. The resin, hardener, and aggregate come in separate containers that can be mixed in the pail. Use the squeeze bottle for precision applications, such as in cracks and holes. The size listed is the combined total of the parts.

	Container
	Size, gal.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Consistency	Mixing Req.	Mix Ratio	Contains Aggregate	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Application Temp. Range, ° F	Color	Process After Hardening	For Use On		Each
Epoxy Surface Fillers



		2	Pail	15	8	Thick Liquid	Yes	4:1	Yes	12 1/2 ft² @ 1/4"	Not Rated	Yes	50 to 100	Light Gray	Drill, Sand	Concrete, Masonry, Stone	2387N2	000000


		5	Pail	15	8	Thick Liquid	Yes	4:1	Yes	50 ft² @ 1/4"	Not Rated	Yes	50 to 100	Light Gray	Drill, Sand	Concrete, Masonry, Stone	2387N1	000000

Low-Temperature Concrete Patching Compounds

Use these two-part compounds to patch concrete floors and stairs in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds. Once cured, they withstand impact, abrasion, and chemicals. The size listed is the combined total of the two parts.

Polyurea—Polyurea compounds are ready for foot traffic in ten minutes and vehicle traffic in 30 minutes. They are self-leveling, but can be mixed with sand (not included) and applied with a trowel.

	Container
	Size, gal.	Type	Begins to Harden, min.	Reaches Full Strength, min.	Consistency	Mixing Req.	Mix Ratio	Contains Aggregate	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Application Temp. Range, ° F	Color	Process After Hardening	For Use On		Each
Polyurea Surface Fillers



		1	Jug	5	30	Thin Liquid	Yes	1:1	No	4 1/2 ft² @ 1/4"	1"	Yes	-5 to 90	Gray	Drill, Sand	Concrete, Stone	7579T312	0000000


		1	Jug	5	30	Thin Liquid	Yes	1:1	No	4 1/2 ft² @ 1/4"	1"	Yes	-5 to 90	Red	Drill, Sand	Concrete, Stone	7579T51	000000

Sand Mixes


Cement Pail	Cement Bag

For use when thickness will be less than 2", sand mixes consist of cement and sand. Mix them with water. They are ready for foot traffic at full strength.

	Container
	Net Wt., lb.	Type	Begins to Harden	Reaches Full Strength	Consistency	Mixing Req.	Mix Ratio	Contains Aggregate	Approx. Coverage @ Thk.	For Use Outdoors	Application Temp. Range, ° F	Color	Process After Hardening	For Use On		Each
Cement Surface Fillers



		10	Pail	15 min.	4 hr.	Powder	Yes	3:1	Yes	1 ft² @ 1"	Yes	40 to 90	Gray	Drill, Sand, Saw, Tap	Concrete, Masonry, Stone	76805T81	000000


		60	Bag	24 hr.	28 day	Powder	Yes	Not Rated	Yes	3 ft² @ 2"	Yes	40 to 90	Gray	Drill, Sand, Saw, Tap	Concrete, Masonry, Stone	76805T51	00000

Storage Rack and Cart Paint

Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.

	Paint															Primers
			Dry Time											Each
	Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Spray Position	Max. Temp., ° F	For Use Outdoors	For Use On	Primer Req. for Use On	Color Code	Color (Appearance)		1-5	6-Up	Color		Each
Alkyd—Aerosol Can



		16	Solvent Based	10	48	18 ft² @ 1 mil	Upright	90	Yes	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Iron, Fiberglass, Galvanized Iron, Galvanized Steel, Masonry, Concrete, Stone, Drywall, Wood, Titanium	Aluminum, Brass, Copper, Drywall, Fiberglass, Titanium, Wood, Galvanized Iron, Galvanized Steel	ANSI 49	Dark Gray (Gloss)	7659T713	000000	000000	Light Gray	7659T1	000000

Epoxy Grout

Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals, such as acids, alkalies, salt water, and common solvents and cleaners. Its lightweight formula makes this grout easy to spread. Use in horizontal or vertical joints—grout won’t sag or shrink. Apply with a grout float. It can be cleaned up with water when wet; it doesn’t require a sealer once it cures. The size listed is the combined total of the two parts.

	Container
	Net Wt., lb.	Type	Begins to Harden, hr.	Reaches Full Strength, day	Consistency	Mixing Req.	Mix Ratio	For Max. Crack Wd.	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Application Temp. Range, ° F	Color	For Use On		Each
Epoxy Surface Fillers



		1.3	Pail	7	3	Thick Liquid	Yes	1:1	1/2"	95 ft² @ 1/4"	1/2"	Yes	70 to 85	Black	Plaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone	77105T21	0000000


		1.3	Pail	7	3	Thick Liquid	Yes	1:1	1/2"	95 ft² @ 1/4"	1/2"	Yes	70 to 85	Brown	Plaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone	77105T22	000000
		1.3	Pail	7	3	Thick Liquid	Yes	1:1	1/2"	95 ft² @ 1/4"	1/2"	Yes	70 to 85	White	Plaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone	77105T23	000000

Leak-Stopping Concrete Crack Fillers


Polyurethane Rubber Cartridge	Cement Pail

Stop slow-flowing and weeping leaks in concrete. These crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Polyurethane Rubber—Polyurethane rubber fillers are thin to penetrate deep into cracks. When fully cured they create a seal that can withstand pressure of up to 2,000 psi. Apply with a standard caulk gun (sold separately). For especially large cracks, use a packer (sold separately) with a grease gun or a grout pump.

Cement—To use cement fillers, mix with water.

	Container
	Size, fl. oz.	Net Wt., lb.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mixing Req.	Mix Ratio	For Max. Crack Wd.	Contains Aggregate	Approx. Linear Coverage @ Thk.	Max. Thk.	For Use Outdoors	Application Temp. Range, ° F	Color	Process After Hardening	For Use On		Each
Polyurethane Rubber Surface Fillers



		10.1	—	Cartridge	3	24 hr.	Thin Liquid	No	—	3/4"	No	15 ft. @ 1/2"	1/2"	Yes	35 to 90	Amber	Sand	Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Asphalt	2382N2	000000


		Cement Surface Fillers



				—	10	Pail	5	28 day	Powder	Yes	3:1	1"	No	6 1/2 ft. @ 1/2"	1"	Yes	40 to 95	Gray	—	Concrete, Masonry, Stone	7685T31	00000


				—	50	Pail	5	28 day	Powder	Yes	3:1	1"	No	33 ft. @ 1/2"	1"	Yes	40 to 95	Gray	—	Concrete, Masonry, Stone	7685T111	000000

Packers for Polyurethane Rubber Surface Fillers

Grout

Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring. Apply with a grout float.

Cement—Mix cement grout with water.

Acrylic Plastic—Acrylic plastic grout does not require mixing. It resists shrinking, cracking, and staining.

	Container
	Size, gal.	Net Wt., lb.	Type	Begins to Harden	Reaches Full Strength	Consistency	Mixing Req.	For Max. Crack Wd.	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Application Temp. Range, ° F	Color	For Use On		Each
Cement Surface Fillers



		—	5	Pail	16 hr.	14 day	Powder	Yes	Not Rated	Not Rated	Not Rated	No	40 to 90	White	Ceramic, Concrete, Stone	77105T64	000000


		Acrylic Plastic Surface Fillers



				1	—	Pail	15 min.	24 hr.	Paste	No	1/2"	101 ft² @ 1/4"	1/2"	No	50 to 100	Beige	Plaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Asphalt	77105T12	00000


				1	—	Pail	15 min.	24 hr.	Paste	No	1/2"	101 ft² @ 1/4"	1/2"	No	50 to 100	Gray	Plaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Asphalt	77105T11	00000
				1	—	Pail	15 min.	24 hr.	Paste	No	1/2"	101 ft² @ 1/4"	1/2"	No	50 to 100	White	Plaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Asphalt	77105T13	00000

Accessories for Surface Fillers

Concrete Crack Fillers

Fill cracks in horizontal, vertical, and overhead concrete surfaces. Surface fillers that have a mix ratio are multi-part fillers. Size listed is the combined total of the parts.

Polyurethane Rubber—Polyurethane rubber fillers allow for more joint movement than acrylic fillers.

Acrylic Plastic—Acrylic plastic fillers are textured to blend in easily and clean up with water.

9 fl. oz. Container—Surface fillers in a 9 fl. oz. cartridge include a mixer nozzle but require a caulk gun with a 26:1 thrust ratio (sold separately). These epoxy fillers can be used underwater.

10.1 fl. oz. Container—Surface fillers in a 10.1 fl. oz. cartridge can be dispensed with a standard caulk gun. They flex as concrete expands and contracts with temperature changes.

Pail—Surface fillers in a pail can repair large areas. They resist abrasion, impact, and chemicals without the use of a sealer. The resin, hardener, and aggregate are in separate containers that can be mixed in the pail.

	Container
	Size	Type	Begins to Harden	Reaches Full Strength	Consistency	Mixing Req.	Mix Ratio	For Max. Crack Wd.	Contains Aggregate	Approx. Linear Coverage @ Thk.	Max. Thk.	For Use Outdoors	Application Temp. Range, ° F	Color	Process After Hardening	For Use On		Each
Polyurethane Rubber Surface Fillers



		10.1 fl. oz.	Cartridge	2 hr.	48 hr.	Paste	No	—	1/2"	No	40 ft. @ 1/4"	1/2"	Yes	40 to 110	Gray	Saw	Concrete, Masonry, Stone	7650T112	000000


		10.1 fl. oz.	Cartridge	72 hr.	7 day	Putty	No	—	1/2"	No	24 ft. @ 1/4"	1/2"	Yes	40 to 120	Gray	Sand	Concrete, Masonry, Stone, Stucco	7650T113	00000


		Epoxy Surface Fillers



				9 fl. oz.	Cartridge	8 min.	3 hr.	Putty	Yes	1:1	3/4"	No	20 ft. @ 1/4"	1/2"	Yes	40 to 90	Gray	Drill, Sand, Saw, Tap	Concrete, Masonry, Stone	7579T212	00000


				2 gal.	Pail	30 min.	8 hr.	Paste	Yes	1:1:1	Not Rated	Yes	360 ft. @ 1/4"	8"	Yes	45 to 90	Gray	Drill, Sand, Saw, Tap	Concrete, Stone	7579T32	000000


				Acrylic Plastic Surface Fillers



						10.1 fl. oz.	Cartridge	30 min.	7 day	Paste	No	—	3/8"	Yes	40 ft. @ 1/4"	1/4"	Yes	40 to 90	Gray	—	Concrete, Masonry, Stone	7650T11	0000

Accessories and Replacements for Surface Fillers

Concrete Surface Fillers


Cement Bag	Epoxy Can	12 fl. oz. Container

Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.

Cement—Mix cement surface fillers with water. They can be used to fill holes up to 7" deep. These quick-setting fillers are ready for foot traffic in just 30 minutes. Application time, after mixing, is 7 minutes.

Epoxy—Epoxy surface fillers are nonsagging. They resist oil, grease, water, alkalies, and chemicals. Application time, after mixing, is 1 hour. The size listed is the combined total of the two parts.

	Container
	Size	Net Wt., lb.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Consistency	Mixing Req.	Mix Ratio	Contains Aggregate	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Application Temp. Range, ° F	Color	Process After Hardening	For Use On		Each
Cement Surface Fillers



		—	3	Bag	7	24	Putty	Yes	4:1	Yes	1 1/2 ft² @ 1/4"	7"	Yes	50 to 100	Gray	Drill, Sand	Concrete, Masonry, Stone	6230T3	000000


		Epoxy Surface Fillers



				12 fl. oz.	—	Can	60	6	Paste	Yes	1:1	No	1/2 ft² @ 1/4"	1/4"	Yes	50 to 90	Gray	Drill, Sand	Ceramic, Porcelain, Concrete, Masonry, Stone	6230T11	00000


				2 qt.	—	Can	60	6	Paste	Yes	1:1	No	3 ft² @ 1/4"	1/4"	Yes	50 to 90	Gray	Drill, Sand	Ceramic, Porcelain, Concrete, Masonry, Stone	6230T1	000000
				2 qt.	—	Can	60	6	Paste	Yes	1:1	No	3 ft² @ 1/4"	1/4"	Yes	50 to 90	White	Drill, Sand	Ceramic, Porcelain, Concrete, Masonry, Stone	6230T4	000000
				2 gal.	—	Can	60	6	Paste	Yes	1:1	No	12 ft² @ 1/4"	1/4"	Yes	50 to 90	Gray	Drill, Sand	Ceramic, Porcelain, Concrete, Masonry, Stone	6230T2	000000

Water-Resistant Surface Fillers


Epoxy Can, Jar	Epoxy Tube	Epoxy Jar, Bottle

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Paste—Paste fillers resist alkalies, solvents, gasoline, and oil.

	Container										Temp. Range
	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Min.	Max., ° F	Color	Process After Hardening	For Use On		Each
Epoxy Surface Fillers



		2	Tube	5	60 min.	Paste	Yes	1:1	12 in² @ 1/4"	1/2"	Yes	Not Rated	200	Gray	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	7521A19	000000


		2	Jar, Bottle	20	24 hr.	Paste	Yes	5:1	8 1/2 in² @ 1/4"	1 1/2"	Yes	Not Rated	185	White	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	7521A15	00000
		2	Jar, Bottle	20	24 hr.	Paste	Yes	5:1	8 1/2 in² @ 1/4"	1 1/2"	Yes	Not Rated	250	Gray	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	7521A17	00000
		14	Can, Jar	20	24 hr.	Paste	Yes	5:1	62 in² @ 1/4"	1 1/2"	Yes	Not Rated	185	White	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	7521A16	00000
		14	Can, Jar	20	24 hr.	Paste	Yes	5:1	62 in² @ 1/4"	1 1/2"	Yes	Not Rated	250	Gray	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	7521A18	00000

Adhesive-Back Roof Repair Rolls

Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls. Backing is rubberized asphalt adhesive. Roll can be cut to size.

								Aluminum		White
Lg., ft.	Wd.	Thk.	Material	Backing Material	Mixing Req.	Application Temp. Range, ° F	For Use On		Each		Each
33 1/2	4"	3/64"	Aluminum	Asphalt	No	55 to 100	Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood	9640T1	000000	9640T4	000000
33 1/2	6"	3/64"	Aluminum	Asphalt	No	55 to 100	Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood	9640T2	00000	9640T5	00000
33 1/2	36"	3/64"	Aluminum	Asphalt	No	55 to 100	Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood	9640T3	000000	9640T6	000000

		Each
Grout Float for Cement	9067T35	000000
Silicone Coating for Cement (22-fl. oz. Spray Bottle)	7219T22	00000

		Each
Replacement Mixer Nozzle for Surface Fillers in 9 fl. oz. Cartridge	7579T23	00000
Caulk Gun for Surface Fillers in 9 fl. oz. Cartridge	7622T27	00000