A strip of hook-and-loop creates a strong seal along the entire length of this sleeving, yet it can be opened at any point to access contents. Use it to wrap around wire, cable, or hose without disconnecting them.

Snaps keep this sleeving securely closed, yet permit quick access to contents and allow you to route wires in between the snaps. Use it to easily wrap around wire, cable, and hose without disconnecting them.

Zip this sleeving around wire, cable, or hose that are connected at both ends to quickly bundle them.

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Made of aluminum with a fiberglass liner, this sleeving reflects heat away from contents and withstands temperatures up to 390°F. A slit along the entire length makes it easy to install around wire, cable, and hose without disconnecting them.

Made of nylon, this sleeving is the most impact- and abrasion-resistant slit corrugated sleeving we offer. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them.

This sleeving reflects heat away from contents and withstands temperatures up to 300°F. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

A hinge along the entire length makes this one-piece sleeving easy to open for installation. Interlocking ridges overlap along the opening to protect contents from dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

Made of woven polyolefin/polyester fabric, this tubing has excellent abrasion resistance so it can be dragged over rough surfaces without damage.

The smallest heat-shrink tubing we offer, this tubing protects wire with a 0.017" and smaller diameter.

Use this general purpose tubing to insulate and protect wire and cable.

Identify ground wire with this green-and-yellow striped tubing.

Made of PVDF, this tubing has excellent cut and abrasion resistance. It has a flame-retardant additive that resists combustion and minimizes the spread of flames.

Also known as halogen-free tubing, this tubing produces minimal amounts of smoke and gas if exposed to an open flame, so it can be used in enclosed areas such as ships and tunnels.

Resistant to diesel fuel, hydraulic fluid, and lubricating oil, this tubing is often used in vehicles.

With excellent resistance to tears and cuts, this tubing withstands demanding use.

With thin walls, this tubing shrinks faster than other high-temperature tubing. It withstands up to 500° F.

Extra-thick walls provide better protection against abrasion and tears than standard moisture-seal tubing, as well as creating a water-resistant seal.

A layer of conductive cloth protects wire and cable from signal interference caused by nearby equipment and devices.

Made of PVC, this tubing resists chemicals, oil, and solvents. The adhesive lining creates a water-resistant seal when heated.

After being cleaned with alcohol, this tubing is bagged and sealed in a clean room. It's certified for material quality and purity.

Organize and route wire and cable in an enclosure—this tubing bundles wires together while allowing them to reach different connection points.

Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.

Seal the end of crimped connections, such as motor coils, to protect them from moisture.

A different shrink ratio on each end allows this tubing to fit over cable assemblies and wire harnesses with large connections, or around connectors with a 90° elbow.

This film has a corrosion inhibitor built-in to shield metal contents from corrosion.

No need for a separate dispenser—these rolls already have dispensing handles.

This printed stretch wrap comes on a handle so you can quickly apply a message to packages.

Roll these dispensers wherever you need them, then wind them around pallets or packages to dispense.

These sleeves contain a corrosion inhibitor to shield metal parts from corrosion.

You only need one free hand to tear a sheet of wrap from the box.

This wrap clings to itself but not the item being wrapped, and continues to adhere after multiple uses.

You only need one free hand to tear a sheet of wrap from the box.

This paper is good as an outer wrap for parcels or as packing fill. Also known as kraft paper.

Pair these wax paper rolls with a paper roll cutter, so you can cut the paper into any length you need to preserve a variety of products and surfaces. Treated with wax, this paper resists tearing and has a slippery surface that protects products and foods from scratches or sticking together during manufacturing, shipping, and storing. Use it to wrap your items or even as a nonstick work surface.

Also known as newsprint, this paper is a clean, low-cost fill material.

Treated with wax, these paper sheets resist tearing and have a slippery surface that protects products and foods from scratches or sticking together during manufacturing, shipping, and storing. Use them to wrap your items or even as a nonstick work surface.

This paper is good as an outer wrap for parcels or as packing fill. Also known as kraft paper.

Shield iron, steel, stainless steel and tin from corrosion.

The multilayered tissue in this wrap soaks up spills and moisture while also insulating and cushioning contents.

Create custom-fitted packaging for products of almost any size or shape. When activated, foam packs expand to fill the space around items.

Also known as furniture pads, these blankets provide soft, reusable padding for furniture and large equipment during moving and storage.

Shield metal from corrosion and block out damaging UV light. A hook-and-loop closure makes these bags easy to seal.

Shield industrial components and other items from scratches during shipping.

Clamp shut the jaws to seal bags.

Cover a wide area to seal large or irregularly shaped packages.

Push down on the handle to create a seal. Also known as impulse sealers, these sealers use a timer that regulates the length of the heating cycle.

Use the shelf to hold work while pushing down on the foot pedal to create a seal. Also known as impulse sealers, these sealers use a timer that regulates the length of the heating cycle.

These envelopes are made of bubble wrap with 3/16” bubbles to cushion contents.

Protect sensitive items from static charges.

Temporarily protect highly polished plastic, metal, and glass surfaces from scratching and marring.

Made of thick vinyl to resist abrasion, these tape sheets protect floor labels from heavy foot and vehicle traffic.

Protect impact-prone surfaces from scratches, chips, and abrasion with this thick, conformable tape.

In addition to resisting harsh chemicals, this tape withstands moisture, abrasion, and repeated impact.

Often used for masking vehicles when painting, this extra-wide tape clings to surfaces and seals off the covered area. It comes in a dispenser with a cutting blade.

Our thinnest duct tape, this tape is easy to unwind and tear by hand.

Only 0.0019" thick, so spliced film and paper easily pass through machinery without breaking.

Highly resistant to impact, tearing, and corrosive chemicals, use FEP tape to line chutes and hoppers and to cover shelves in laboratories.

Also known as skived tape, this low-friction tape stretches to conform to irregular surfaces.

Add a slippery surface to difficult-to-bond surfaces, such as plastic, foam, and powder-coated metal.

This tape discharges minor amounts of surface static electricity and resists static buildup.

Cover chutes, packaging lines, and slides with this tape for a slippery, nonstick surface that resists abrasion and impact.

Fiberglass is laminated with Teflon® PTFE for a slippery, durable tape with excellent chemical and temperature resistance. Use it as a release surface on heat sealers and blister forming equipment.

Dissipate static and create a slick surface.

Cut with scissors or a utility knife to cover irregularly shaped electrical hazards.