PTFE Lubricant Sprays | McMaster-Carr

Filter by

Additive

Container Type

DFARS Compliance

For Use On

Lubricant Type

Maximum Temperature

Minimum Temperature

Container Net Weight

RoHS Compliance

REACH Compliance

Manufacturer

Trade Name

Food Industry Standard

Base Oil

Melting Temperature

Thickener

For Use With

Forward

How can we improve?

34 Products

About Grease

About Lubricants

These lubricants go on wet for easy application. Once dry, they form a nonstick film that won't attract dust. Use them for general purpose lubricating in most applications.

Lubricants with PTFE can be used on most rubber and plastic surfaces. Aerosol can with a flip-up straw has a straw that’s attached to the nozzle, so it won’t get lost. Raise it for precision dispensing; lower it for storage or to dispense as a spray.

Lubricants that cannot be sold outside the United States are restricted by product labeling requirements.

Container					Each		Package
Net Weight	Type	Additive	Temp. Range, °F	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
WD-40 Specialist Dry Lube
10 oz.	Aerosol Can	PTFE	-50° to 500°	Outside United States	0000000	000000	6	0000000	000000

Long-Life Dry-Film Lubricants

Nano-sized additives fill small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. These lubricants dry to form a nonstick film that won’t attract dust. They are often used on hinges, gears, and roller chain.

Lubricants that cannot be sold to the regions listed exceed local regulatory limits on VOC (volatile organic compounds).

Container					Each		Package
Net Weight, oz.	Type	Additive	Temp. Range, °F	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
11	Aerosol Can	Ceramic, PTFE	-30° to 570°	CA, Canada	0000000	000000	12	0000000	0000000

Food Industry Dry-Film Lubricants

Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour. Lubricants with PTFE have small particles of PTFE that fill in surface imperfections for excellent lubricity.

Lubricants cannot be sold to the listed areas due to product regulations.

Each

Container
Net Weight, oz.	Type	Additive	Temp. Range, °F	Specifications Met	Cannot Be Sold To		Each
Lubricants
5 1/4	Aerosol Can	PTFE	-40° to 500°	FDA Compliant 21 CFR 178.3570, NSF Registered H1	CA, NY	0000000	000000
11	Aerosol Can	PTFE	-40° to 500°	FDA Compliant 21 CFR 178.3570, NSF Registered H1	CA, NY	0000000	00000

Package

Container
Net Weight, oz.	Type	Additive	Temp. Range, °F	Specifications Met	Cannot Be Sold To	Pkg. Qty.		Pkg.
Lubricants
5 1/4	Aerosol Can	PTFE	-40° to 500°	FDA Compliant 21 CFR 178.3570, NSF Registered H1	CA, NY	12	0000000	0000000
11	Aerosol Can	PTFE	-40° to 500°	FDA Compliant 21 CFR 178.3570, NSF Registered H1	CA, NY	12	00000000	000000

Dry-Film Lubricants for Chain

A high load-carrying capacity makes these lubricants good for use on chain and moving metal parts. They dry to form a film that lubricates without attracting dust.

Lubricants with PTFE can be used with most plastics and are chemically inert.

Container				Each		Package
Net Weight	Type	Additive	Temp. Range, °F		Each	Pkg. Qty.		Pkg.
Sprayon LU 708 High Performance Dry Film Lubricant
10 oz.	Aerosol Can	PTFE	-40° to 570°	0000000	000000	12	00000000	0000000

Overhead Door Dry-Film Lubricants

Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise. PTFE provides excellent lubricity, while silicone repels water for use outdoors. Once dry, these lubricants form a thin lubricating layer that won’t rub off or attract dust.

Container				Each		Package
Net Weight, oz.	Type	Additive	Temp. Range, °F		Each	Pkg. Qty.		Pkg.
9.3	Aerosol Can	PTFE, Silicone, Zinc	0° to 120°	0000000	00000	12	0000000	000000

Penetrating Lubricants

Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.

Lubricants with PTFE provide long-lasting lubrication.

Lubricants cannot be sold to the listed regions due to import regulations, product labeling requirements, or regulatory limits on VOCs (volatile organic compounds).

LPS

LPS Magnum is a wet film that provides maximum lubricity.

Container					Each		Package
Net Weight	Type	Additive	Temp. Range, °F	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
LPS Magnum
11 oz.	Aerosol Can	PTFE	-50° to 450°	Outside United States	0000000	000000	12	00000000	0000000

Tri-Flow

Tri-Flow cleans, lubricates, and protects, even in extreme temperatures.

Each

Container
Size	Net Weight	Type	Additive	Temp. Range, °F	Specifications Met		Each
Tri-Flow Industrial
__	12 oz.	Aerosol Can	PTFE	-60° to 475°	NSF Registered H2	0000000	000000
18 fl. oz.	__	Spray Bottle	PTFE	-60° to 475°	NSF Registered H2	0000000	00000

Package

Container
Size	Net Weight	Type	Additive	Temp. Range, °F	Specifications Met	Pkg. Qty.		Pkg.
Tri-Flow Industrial
__	12 oz.	Aerosol Can	PTFE	-60° to 475°	NSF Registered H2	12	00000000	0000000
18 fl. oz.	__	Spray Bottle	PTFE	-60° to 475°	NSF Registered H2	6	00000000	000000

Slick 50

Slick 50 OneLube lubricates and protects metal-to-metal connections and is wear resistant.

Container					Each		Package
Net Weight, oz.	Type	Additive	Temp. Range, °F	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
Slick 50 OneLube
12	Aerosol Can	PTFE	-30° to 180°	Canada	00000000	00000	12	000000000	000000

Long-Life Penetrating Lubricants

Nano-sized additives fill small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants. They go on as a foam to cling to parts and resist dripping.

Each

Container
Net Weight, oz.	Type	Additive	Temp. Range, °F		Each
11	Aerosol Can	Ceramic-Reinforced PTFE	Not Rated to 120°	0000000	000000

Package

Container
Net Weight, oz.	Type	Additive	Temp. Range, °F	Pkg. Qty.		Pkg.
11	Aerosol Can	Ceramic-Reinforced PTFE	Not Rated to 120°	12	0000000	0000000

High-Pressure Food Industry Penetrating Lubricants

Formulated to handle high loads and temperatures, these lubricants are NSF registered H1 for incidental food contact. Use them with chain and gears in food-processing and preparation areas and with hinges on ovens. They cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment. Lubricants go on as a foam to cling to parts and resist dripping.

Container					Each		Package
Net Weight, oz.	Type	Additive	Temp. Range, °F	Specifications Met		Each	Pkg. Qty.		Pkg.
Sprayon LU 205 Food Grade Chain
15	Aerosol Can	PTFE	15° to 635°	NSF Registered H1	0000000	000000	12	0000000	0000000

Penetrating Lubricants for Chain

For use with roller chain and other moving metal parts, these thin lubricants cut through dirt, grease, and rust, withstand heavy loads, and resist wear.

Lubricants with PTFE provide long-lasting lubrication.

Container					Each		Package
Net Weight, oz.	Type	Additive	Minimum Temperature, °F	Maximum Temperature, °F		Each	Pkg. Qty.		Pkg.
Lubricants
11	Aerosol Can	PTFE	0°	120°	0000000	00000	6	0000000	000000

Food Industry Grease

Use this grease in food-processing and preparation areas.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.

Grease that is NSF registered H1 and grease that meets FDA 21 CFR 178.3570 are rated for incidental contact with food.

Mineral-oil-based grease, derived from petroleum, is usually more economical than synthetic-oil-based grease. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and generally withstands a wider range of temperatures. Grease with aluminum thickener has good moisture resistance and excellent oxidation resistance. Grease with silica thickener has excellent heat and moisture resistance and good oxidation resistance.

Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

Grease cannot be sold to the listed areas due to product regulations.

Each

			Container
NLGI Viscosity Grade	Base Oil	Additive	Net Weight	Type	Temp. Range, °F	Melting Temp., °F	Color	Specifications Met	Cannot Be Sold To		Each
Aluminum Thickener
2	Mineral	PTFE	13 1/2 oz.	Aerosol Can	15° to 350°	500°	White	NSF Registered H1	__	0000000	000000
Silica Thickener
2	Synthetic	PTFE	11 oz.	Aerosol Can	-45° to 450°	Not Rated	White	NSF Registered H1	CA, NY	0000000	00000

Package

			Container
NLGI Viscosity Grade	Base Oil	Additive	Net Weight	Type	Temp. Range, °F	Melting Temp., °F	Color	Specifications Met	Cannot Be Sold To	Pkg. Qty.		Pkg.
Aluminum Thickener
2	Mineral	PTFE	13 1/2 oz.	Aerosol Can	15° to 350°	500°	White	NSF Registered H1	__	12	0000000	0000000
Silica Thickener
2	Synthetic	PTFE	11 oz.	Aerosol Can	-45° to 450°	Not Rated	White	NSF Registered H1	CA, NY	12	00000000	000000

No-Residue Mold-Release Lubricants

Also known as paintable mold-release lubricants, these lubricants don’t leave a residue, so you can paint or finish the molded part without the need to clean it. Apply them to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing.

Lubricants with PTFE create a long-lasting film that withstands high temperatures.

Container				Each		Package
Net Weight, oz.	Type	Additive	Temp. Range, °F		Each	Pkg. Qty.		Pkg.
Sprayon MR 311 Dry Film Release Agent
12	Aerosol Can	PTFE	-50° to 575°	0000000	000000	12	00000000	0000000
Lubricants
12	Aerosol Can	PTFE	Not Rated to 500°	0000000	00000	12	00000000	000000