We will reply to your message within an hour.
Made with Teflon® PTFE resins, these sheets and bars surpass most plastics when it comes to chemical resistance and performance in extreme temperatures.
Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.
This film is made with virgin Teflon® PTFE resins. It can handle extreme temperatures and resists most solvents.
Often used in assemblies that rub against each other, this powder blends into plastic, rubber, composites, and lubricants to keep them from sticking.
This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.
Also called reprocessed and mechanical-grade PTFE, this material is an economical alternative to standard PTFE.
Manufactured from Rulon PTFE, a PTFE that's modified with filler material for a super-slippery, impact-resistant surface that resists wear.
Protect sensitive equipment from damaging electrical static charges.
Filled with carbon and graphite, this naturally slippery PTFE stands up to wear better than standard PTFE.
A layer of tin-plated steel adds structural support and makes this PTFE easy to form.
Often used as gaskets and bearings, this slippery-surface material absorbs virtually no moisture. PCTFE is equivalent to Kel-F and Neoflon.
Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.
The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.
A glass-fiber filler gives this material increased rigidity over standard Delrin® acetal resin. Use it to machine manifolds, impellers, and other parts that require rigidity.
Packs include one 2” square of ABS, Delrin® acetal, LDPE, HDPE, UHMW, nylon, cast nylon, polyester, polystyrene, Rexolite polystyrene, and Noryl PPO.
Each selector pack includes one 2” square of FEP, polypropylene, PPS, PVC, CPVC, PVDF, and Teflon® PTFE.
Because this expanded PTFE tape is thicker than other gasket tape, it fills the irregularities on rough-surfaces flanges when compressed for a tight seal.
Very soft and conformable, this expanded PTFE gasket tape compresses into an extremely thin profile. Use it to create a leak-resistant seal in tight-tolerance applications, such as on precision machinery.
This material is made of expanded PTFE. It is more compressible than pure PTFE to ensure a tight seal.
Made of FDA-listed material for use with food and beverage.
Made of pure PTFE, this material has a slippery surface that prevents sticking.
A fiberglass filler in this PTFE gasket material provides strength and prevents it from thinning out when compressed.
Also known as Gore GR.
These soft expanded PTFE gaskets are made of FDA-listed material for use with food and beverage.
Made of soft expanded PTFE, these gaskets are reinforced with a stainless steel insert for added strength. They can hold their shape better than gaskets without an insert.
Often used with fiberglass flanges where you want to avoid overtightening, these gaskets seal under low torque. They’re made of soft, expanded PTFE that is also known as Gore UPG.
These pure PTFE gaskets have a slippery surface that prevents sticking.
A stainless steel insert in these PTFE gaskets adds strength and makes them reusable.
Reinforced with fiberglass filler for strength, these PTFE gaskets won't thin out when compressed.
Form a seal even under the low torque needed for fiberglass flanges. Also known as Gore UPG, these gaskets are made from soft expanded PTFE.
Reinforced with a stainless steel insert, these gaskets are stronger and can hold their shape better than gaskets without an insert.
Made of pure PTFE, these gaskets have a slippery surface that prevents sticking.
A fiberglass filler in these PTFE gaskets provides strength to prevent them from thinning out when compressed.
Made from PTFE with an EPDM core, these gaskets have added resiliency resulting in a longer product life.
Made of PTFE, these gaskets are chemically inert (except to molten alkali metal and elemental fluorine).
If a piece wears off, fragments as small as 1 mm can be picked up by a metal-detection system to prevent contamination of your process line.
Made from a blend of PTFE and 316 stainless steel, these gaskets hold up to the harsh chemicals, high pressures, and high temperatures used in sanitary processes.
These chemical-resistant gaskets have a perforated plate that filters, separates, and strains liquids or dry materials in your line.
Offering excellent resistance to detergents, hydraulic fluid, and salts, these PTFE gaskets have a corrosion-resistant 316 stainless steel screen to provide inline straining.
These gaskets meet Fed. Std. Class 10,000 and ISO Class 7 clean room requirements.
Create a tight seal when connecting Swedish Milk Standard (SMS) fittings.
These PTFE gaskets are virtually chemically inert.
Made from a blend of PTFE and 316 stainless steel, these gaskets stand up to the harsh chemicals and high pressures and temperatures used in sanitary processes.
Made of soft expanded PTFE, these gaskets are virtually chemically inert.
Low-Friction Tape Shapes Made with Teflon® PTFE.
This tape provides a slick surface along with excellent resistance to electrical current.
Our most slippery tape, the slick surface allows items to glide smoothly over it.
A strong, thick layer of Teflon® PTFE makes this tape tougher than standard Low-Friction Tape Made with Teflon® PTFE.
Also known as skived tape, this low-friction tape stretches to conform to irregular surfaces.
Backed with 3M VHB 4941 foam adhesive for strength, padding, and vibration resistance.
Use this slippery PTFE-coated tape for a smooth release on heat sealers and molds.
Fiberglass is laminated with Teflon® PTFE for a slippery, durable tape with excellent chemical and temperature resistance. Use it as a release surface on heat sealers and blister forming equipment.
This tape discharges minor amounts of surface static electricity and resists static buildup.
Often referred to as Rulon and bearing tape, this self-lubricating PTFE tape provides better abrasion and wear resistance than our standard slippery PTFE tape.
This chemical-resistant tape has adhesive on both sides.
Twice as thick as our standard antistatic electrical tape, this tape is made of abrasion-resistant aramid and antistatic PTFE.
Cut this stock into custom shapes to fit your application.
Run chemicals through this tubing at temperatures between -100° F and 500° F.
Not only can this tubing handle temperatures between -450° F and 500° F, it also has a convoluted spiral design for good flexibility and smooth flow.
Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.
Use this conductive hose in a grounded system to eliminate static buildup. The material is blended with carbon black, which conducts static charges away from the hose walls.
Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.
Rigid and hard with a slippery surface, these PTFE O-rings resist harsh chemicals, such as acetone, fluorinated solvents, methanol, and boric acid.
These temperature- and chemical-resistant O-rings prevent leaks in tube fittings that have a straight-thread connection, also known as O-ring boss fittings.
Pair these O-rings with metric sanitary fittings, which are commonly known as aseptic fittings. Made of PTFE, they’re rigid with a slippery surface and resist harsh chemicals such as acetone, fluorinated solvents, methanol, and boric acid.
These PTFE backup rings resist harsh chemicals, such as acetone, fluorinated solvents, methanol, and many acids.
These 325-piece assortments mean you’ll always have a backup ring on hand.
Rigid and hard with a slippery surface, these O-rings resist harsh chemicals, such as acetone, fluorinated solvents, methanol, and boric nitric, and sulfonic acids.
Made of PTFE, this tape has a slippery surface that keeps threads from binding to make parts easy to assemble.
This tape has a higher density than standard tape for a better seal between threads.
Use color to identify water, gas, and chemical connections.
This tape contains nickel to prevent seizing and galling associated with stainless steel threaded connections. It’s also good for use with other metals.
Contain, reinforce, separate, or protect materials with this stiff mesh. It is often used in ovens and dryers and can be used with food and beverages.
Shield vents on electronic and automotive equipment, such as cell phone microphones, from water, dirt, and debris without blocking them entirely.
Stick these discs onto breather and other circular vents to guard against water and dirt without obstructing flow.
Often used in laboratory testing, these discs are designed to capture tiny particles from fluids.
Fill irregularities in valve stem with these soft PTFE seals.
Made of FDA-listed material for use with food and beverage, these PTFE seals are lubricated with mineral oil. Use them in pumps.
These lubricated PTFE fiber seals stand up to most chemicals. Use them in pumps and valves.
Also known as 100% GFO, these expanded PTFE seals contain graphite powder, which dissipates heat away from the shaft and allows pumps to run cool at high speeds.
These seals are made of PTFE fiber without a lubricant, so they’re harder than other chemical-resistant packing seals to handle high-pressure valve applications.
Aramid and PTFE fibers are blended for seals that resist chemicals and abrasion. Use these seals in pumps.
The most abrasion resistant of all our packing seals, these are made of PTFE-impregnated aramid fiber that has been saturated in a lubricant. They are for use in pumps.
Our most compressible packing seals, these require less pressure than any other to make an effective seal. They’re made of lubricated PTFE-impregnated aramid fiber and are for use in pumps.
Made of PTFE-impregnated synthetic fiber, these seals are for use in pumps.
PTFE has excellent chemical resistance and withstands a wide temperature range of -110° F to 500° F.
In addition to providing excellent sealing performance at low pressure, these seals withstand a wider range of temperatures and chemicals than U-cup seals. They’re also known as spring-energized seals.
PTFE gives these seals a slippery surface that allows rod speeds more than two times faster than our other piston seals.
A square O-ring prevents these piston seals from rocking in the groove.
Rated for pressure up to 10,000 psi, these seals withstand the highest pressure of our piston seals.
The slippery PTFE surface of these seals allows rod motion up to seven times faster than our other rod seals.
PTFE gives these seals a slippery surface that facilitates rod speeds over seven times faster than our other buffering seals. They're rated for pressure up to 5,000 psi.
Cut this stock to make wear rings that fit any rod or bore diameter.
Made from PTFE, these wear rings have a slippery surface that allows rods to move at least three times faster than nylon wear rings.
Made from MDS-filled PTFE for a slippery surface, these wipers allow rods to move three times faster than other rod wipers.
A slippery PTFE surface allows these seals to function at speeds at least 25% faster than other rotary shaft seals.
This trim withstands temperatures up to 500° F, which is generally twice as high as our other slippery trim. With a slippery surface, it minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant.