McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    432 Products

    Pull-Out Dowel Pins
    3D CAD models available

    Remove pins even when you only have access to one end or they sit flush with the surface of your part. With one internally threaded end, they are easier to remove than most dowel pins. Thread a screw into the pin and then pull with the removal tool (sold separately). You can also pull the screw with pliers, but there’s more risk of damaging the hole.
    Steel
    Image of Product. Front orientation. Dowel Pins. Pull-Out Removal, Tapped Head, Standard Tolerance.
    High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.
    High-Strength Black-Oxide Alloy Steel—With a matte black appearance, these pins combine a finished look with the superior strength and wear resistance of alloy steel. They offer minimal corrosion resistance, so they're best for dry environments.
    Spring Steel—These pins won't deform from stress and vibration. They're stronger than stainless steel but not quite as strong as alloy steel. Pins perform best in dry environments since moisture will cause them to rust.
    Puller Handle—A complete removal tool requires a puller handle and a tip that fits your pin diameter. To use, thread a tip into the puller handle and then place the tip over the screw in your pin. Slide the weight along the handle to pull the pin out.
    Lg.
    Dia. Tolerance
    Thread Size
    Double Shear
    Breaking
    Strength, lbf
    Min.
    Hardness
    Specs. Met
    Each
    High-Strength Alloy Steel
     
    1/4" Diameter
    1/2"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.200000000000000
    3/4"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    1"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    1 3/4"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
     
    5/16" Diameter
    3/4"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    1"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    2 1/4"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
     
    3/8" Diameter
    3/4"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    1"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    1 3/4"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    2 1/4"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    3"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
     
    7/16" Diameter
    1"0.0001" to 0.0003"1/4"-20
    19,500Rockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    19,500Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"1/4"-20
    19,500Rockwell C47ASME B18.8.20000000000000
     
    1/2" Diameter
    3/4"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    1"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    1 3/4"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    2 1/4"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    3"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    3 1/2"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    4"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
     
    5/8" Diameter
    1 1/4"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.20000000000000
    2 1/4"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.20000000000000
    3"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.20000000000000
    4"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.20000000000000
     
    3/4" Diameter
    1 1/2"0.0001" to 0.0003"5/16"-18
    57,000Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"5/16"-18
    57,000Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"5/16"-18
    57,000Rockwell C47ASME B18.8.20000000000000
    3"0.0001" to 0.0003"5/16"-18
    57,000Rockwell C47ASME B18.8.20000000000000
    4"0.0001" to 0.0003"5/16"-18
    57,000Rockwell C47ASME B18.8.20000000000000
     
    1" Diameter
    2"0.0001" to 0.0003"5/16"-18
    102,000Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"5/16"-18
    102,000Rockwell C47ASME B18.8.200000000000000
    3"0.0001" to 0.0003"5/16"-18
    102,000Rockwell C47ASME B18.8.200000000000000
    4"0.0001" to 0.0003"5/16"-18
    102,000Rockwell C47ASME B18.8.200000000000000
     
    16 mm Diameter
    32 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500Rockwell C52DIN 7979D-m60000000000000
    36 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500Rockwell C52DIN 7979D-m60000000000000
    40 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500Rockwell C52DIN 7979D-m60000000000000
    50 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500Rockwell C52DIN 7979D-m60000000000000
    60 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500Rockwell C52DIN 7979D-m60000000000000
    70 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500Rockwell C52DIN 7979D-m60000000000000
     
    20 mm Diameter
    50 mm0.008 mm to 0.021 mmM10 × 1.5 mm51,500Rockwell C52DIN 7979D-m60000000000000
    60 mm0.008 mm to 0.021 mmM10 × 1.5 mm51,500Rockwell C52DIN 7979D-m600000000000000
    80 mm0.008 mm to 0.021 mmM10 × 1.5 mm51,500Rockwell C52DIN 7979D-m600000000000000
     
    High-Strength Black-Oxide Alloy Steel
     
    1/4" Diameter
    1/2"0.0001" to 0.0003"8-32
    Not RatedRockwell C60ASME B18.8.20000000000000
    3/4"0.0001" to 0.0003"8-32
    Not RatedRockwell C60ASME B18.8.20000000000000
    1"0.0001" to 0.0003"8-32
    Not RatedRockwell C60ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"8-32
    Not RatedRockwell C60ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"8-32
    Not RatedRockwell C60ASME B18.8.20000000000000
    2"0.0001" to 0.0003"8-32
    Not RatedRockwell C60ASME B18.8.20000000000000
     
    5/16" Diameter
    3/4"0.0001" to 0.0003"10-32
    Not RatedRockwell C60ASME B18.8.20000000000000
    1"0.0001" to 0.0003"10-32
    Not RatedRockwell C60ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"10-32
    Not RatedRockwell C60ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"10-32
    Not RatedRockwell C60ASME B18.8.20000000000000
    2"0.0001" to 0.0003"10-32
    Not RatedRockwell C60ASME B18.8.20000000000000
     
    3/8" Diameter
    3/4"0.0001" to 0.0003"10-32
    Not RatedRockwell C60ASME B18.8.20000000000000
    1"0.0001" to 0.0003"10-32
    Not RatedRockwell C60ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"10-32
    Not RatedRockwell C60ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"10-32
    Not RatedRockwell C60ASME B18.8.20000000000000
    2"0.0001" to 0.0003"10-32
    Not RatedRockwell C60ASME B18.8.20000000000000
     
    1/2" Diameter
    1"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C60ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C60ASME B18.8.20000000000000
    2"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C60ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C60ASME B18.8.20000000000000
     
    5/8" Diameter
    2"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C60ASME B18.8.20000000000000
     
    Spring Steel
     
    6 mm Diameter
    16 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    18 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    20 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    24 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    28 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    30 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    32 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    36 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    40 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    50 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    60 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
     
    8 mm Diameter
    20 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    24 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    28 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    30 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    32 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    36 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    40 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    50 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    60 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    70 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    80 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
     
    10 mm Diameter
    24 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    28 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    30 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    32 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    36 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    40 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    50 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    60 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    70 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    80 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
     
    12 mm Diameter
    24 mm0.007 mm to 0.018 mmM6 × 1 mm24,000Rockwell C52DIN 7979D-m60000000000000
    30 mm0.007 mm to 0.018 mmM6 × 1 mm24,000Rockwell C52DIN 7979D-m60000000000000
    36 mm0.007 mm to 0.018 mmM6 × 1 mm24,000Rockwell C52DIN 7979D-m60000000000000
    45 mm0.007 mm to 0.018 mmM6 × 1 mm24,000Rockwell C52DIN 7979D-m60000000000000
    50 mm0.007 mm to 0.018 mmM6 × 1 mm24,000Rockwell C52DIN 7979D-m60000000000000
    60 mm0.007 mm to 0.018 mmM6 × 1 mm24,000Rockwell C52DIN 7979D-m60000000000000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Dowel Pins. Pull-Out Removal, Tapped Head, Standard Tolerance.
    18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Puller Handle—A complete removal tool requires a puller handle and a tip that fits your pin diameter. To use, thread a tip into the puller handle and then place the tip over the screw in your pin. Slide the weight along the handle to pull the pin out.
    Lg.
    Dia. Tolerance
    Thread
    Size
    Double Shear
    Breaking
    Strength
    Min.
    Hardness
    Specs. Met
    Each
    18-8 Stainless Steel
     
    3/16" Diameter
    1/2"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.200000000000000
    9/16"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    5/8"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    3/4"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    7/8"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/8"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 3/8"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 3/4"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    2"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.200000000000000
     
    1/4" Diameter
    1/2"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    5/8"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    3/4"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    7/8"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/8"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 3/8"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 3/4"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    2"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    2 1/4"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.200000000000000
    2 1/2"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    3"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.200000000000000
     
    5/16" Diameter
    1/2"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    3/4"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    7/8"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    1"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    2"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
     
    3/8" Diameter
    1/2"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    5/8"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    3/4"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    7/8"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    1"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 3/4"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.200000000000000
    2"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.200000000000000
    2 1/4"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.200000000000000
    2 1/2"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.200000000000000
    3"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.200000000000000
     
    7/16" Diameter
    1"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
     
    1/2" Diameter
    3/4"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    1"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    1 1/4"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    1 3/4"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    2 1/4"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    3"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    3 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    4"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
     
    5/8" Diameter
    1 1/4"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    2 1/4"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    3"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    4"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
     
    3/4" Diameter
    1 1/2"0.0001" to 0.0003"5/16"-18
    Not RatedNot RatedASME B18.8.200000000000000
    2"0.0001" to 0.0003"5/16"-18
    Not RatedNot RatedASME B18.8.200000000000000
    2 1/2"0.0001" to 0.0003"5/16"-18
    Not RatedNot RatedASME B18.8.200000000000000
    3"0.0001" to 0.0003"5/16"-18
    Not RatedNot RatedASME B18.8.200000000000000
    4"0.0001" to 0.0003"5/16"-18
    Not RatedNot RatedASME B18.8.200000000000000
     
    1" Diameter
    2"0.0001" to 0.0003"5/16"-18
    Not RatedNot Rated__00000000000000
    2 1/2"0.0001" to 0.0003"5/16"-18
    Not RatedNot Rated__00000000000000
    3"0.0001" to 0.0003"5/16"-18
    Not RatedNot Rated__00000000000000
    4"0.0001" to 0.0003"5/16"-18
    Not RatedNot Rated__00000000000000
     

    Vented Pull-Out Dowel Pins
    3D CAD models available

    Insert and remove from blind holes with less effort than pins that aren't vented. The vent relieves trapped air, so pressure doesn't create resistance as you install the pin. Because they have a tapped end, you can thread in a screw and pull the pin out with a removal tool (sold separately). You can also pull using pliers, but there’s more risk of damaging the hole.
    Flat Shaft
    Image of Product. Front orientation. Dowel Pins. Pull-Out Removal, Tapped Head, Standard Tolerance, Vented, Flat Shaft.
    The flat side of these pins creates a vent that's less likely to be blocked than a spiral shaft, but doesn’t offer quite as strong of a hold.
    High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.
    Spring Steel—These pins won't deform from stress and vibration. They're stronger than stainless steel but not quite as strong as alloy steel. Pins perform best in dry environments since moisture will cause them to rust.
    18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Puller Handle—A complete removal tool requires a puller handle and a tip that fits your pin diameter. To use, thread a tip into the puller handle and then place the tip over the screw in your pin. Slide the weight along the handle to pull the pin out.
    Lg.
    Dia. Tolerance
    Thread Size
    Double Shear
    Breaking
    Strength, lbf
    Min.
    Hardness
    Specs. Met
    Each
    High-Strength Alloy Steel
     
    1/4" Diameter
    3/4"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.200000000000000
    1"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    1 3/4"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
     
    5/16" Diameter
    3/4"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    1"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
     
    3/8" Diameter
    1"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    2 1/4"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    3"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
     
    1/2" Diameter
    1"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    1 3/4"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    3"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    3 1/2"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
     
    5/8" Diameter
    1 1/2"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.20000000000000
    2 1/4"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.20000000000000
    3"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.200000000000000
     
    3/4" Diameter
    2"0.0001" to 0.0003"5/16"-18
    57,000Rockwell C47ASME B18.8.200000000000000
    3"0.0001" to 0.0003"5/16"-18
    57,000Rockwell C47ASME B18.8.200000000000000
    4"0.0001" to 0.0003"5/16"-18
    57,000Rockwell C47ASME B18.8.200000000000000
     
    1" Diameter
    2"0.0001" to 0.0003"5/16"-18
    102,000Rockwell C47ASME B18.8.200000000000000
    3"0.0001" to 0.0003"5/16"-18
    102,000Rockwell C47ASME B18.8.200000000000000
    4"0.0001" to 0.0003"5/16"-18
    102,000Rockwell C47ASME B18.8.200000000000000
     
    16 mm Diameter
    32 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500Rockwell C52DIN 7979D-m60000000000000
    40 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500Rockwell C52DIN 7979D-m60000000000000
    50 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500Rockwell C52DIN 7979D-m60000000000000
    60 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500Rockwell C52DIN 7979D-m60000000000000
    70 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500Rockwell C52DIN 7979D-m60000000000000
    80 mm0.007 mm to 0.018 mmM8 × 1.25 mm33,500Rockwell C52DIN 7979D-m60000000000000
     
    Spring Steel
     
    6 mm Diameter
    16 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    18 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    20 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    24 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    28 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    30 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    36 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    40 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
    50 mm0.004 mm to 0.012 mmM4 × 0.7 mm6,600Rockwell C52DIN 7979D-m60000000000000
     
    8 mm Diameter
    20 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    24 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    28 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    30 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    36 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    40 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    50 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    60 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
    70 mm0.006 mm to 0.015 mmM5 × 0.8 mm10,400Rockwell C52DIN 7979D-m60000000000000
     
    10 mm Diameter
    24 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    28 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    30 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    36 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    40 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    50 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    60 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
    70 mm0.006 mm to 0.015 mmM6 × 1 mmNot RatedRockwell C52DIN 7979D-m60000000000000
     
    12 mm Diameter
    24 mm0.007 mm to 0.018 mmM6 × 1 mm24,000Rockwell C52DIN 7979D-m60000000000000
    30 mm0.007 mm to 0.018 mmM6 × 1 mm24,000Rockwell C52DIN 7979D-m60000000000000
    36 mm0.007 mm to 0.018 mmM6 × 1 mm24,000Rockwell C52DIN 7979D-m60000000000000
    40 mm0.007 mm to 0.018 mmM6 × 1 mm24,000Rockwell C52DIN 7979D-m60000000000000
    45 mm0.007 mm to 0.018 mmM6 × 1 mm24,000Rockwell C52DIN 7979D-m60000000000000
    50 mm0.007 mm to 0.018 mmM6 × 1 mm24,000Rockwell C52DIN 7979D-m60000000000000
    60 mm0.007 mm to 0.018 mmM6 × 1 mm24,000Rockwell C52DIN 7979D-m60000000000000
     
    18-8 Stainless Steel
     
    1/4" Diameter
    3/4"0.0001" to 0.0003"8-32
    Not RatedRockwell C47ASME B18.8.20000000000000
    1"0.0001" to 0.0003"8-32
    Not RatedRockwell C47ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"8-32
    Not RatedRockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"8-32
    Not RatedRockwell C47ASME B18.8.20000000000000
    1 3/4"0.0001" to 0.0003"8-32
    Not RatedRockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"8-32
    Not RatedRockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"8-32
    Not RatedRockwell C47ASME B18.8.20000000000000
     
    5/16" Diameter
    3/4"0.0001" to 0.0003"10-32
    Not RatedRockwell C47ASME B18.8.20000000000000
    1"0.0001" to 0.0003"10-32
    Not RatedRockwell C47ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"10-32
    Not RatedRockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"10-32
    Not RatedRockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"10-32
    Not RatedRockwell C47ASME B18.8.200000000000000
    2 1/2"0.0001" to 0.0003"10-32
    Not RatedRockwell C47ASME B18.8.200000000000000
     
    3/8" Diameter
    1"0.0001" to 0.0003"10-32
    Not RatedRockwell C47ASME B18.8.200000000000000
    1 1/4"0.0001" to 0.0003"10-32
    Not RatedRockwell C47ASME B18.8.200000000000000
    1 1/2"0.0001" to 0.0003"10-32
    Not RatedRockwell C47ASME B18.8.200000000000000
    2"0.0001" to 0.0003"10-32
    Not RatedRockwell C47ASME B18.8.200000000000000
    2 1/2"0.0001" to 0.0003"10-32
    Not RatedRockwell C47ASME B18.8.200000000000000
    3"0.0001" to 0.0003"10-32
    Not RatedRockwell C47ASME B18.8.200000000000000
     
    1/2" Diameter
    1"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C47ASME B18.8.200000000000000
    1 1/4"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C47ASME B18.8.200000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C47ASME B18.8.200000000000000
    1 3/4"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C47ASME B18.8.200000000000000
    2"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C47ASME B18.8.200000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C47ASME B18.8.200000000000000
    3"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C47ASME B18.8.200000000000000
     
    5/8" Diameter
    1 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C47ASME B18.8.200000000000000
    2"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C47ASME B18.8.200000000000000
    3"0.0001" to 0.0003"1/4"-20
    Not RatedRockwell C47ASME B18.8.200000000000000
     
    3/4" Diameter
    2"0.0001" to 0.0003"5/16"-18
    Not RatedRockwell C47ASME B18.8.200000000000000
    3"0.0001" to 0.0003"5/16"-18
    Not RatedRockwell C47ASME B18.8.200000000000000
     
    1" Diameter
    2"0.0001" to 0.0003"5/16"-18
    Not RatedRockwell C47__00000000000000
    3"0.0001" to 0.0003"5/16"-18
    Not RatedRockwell C47__00000000000000
     
    4 mm Diameter
    16 mm0.004 mm to 0.015 mmM3 × 0.5 mm101,000Rockwell C18DIN 7979C-m60000000000000
    20 mm0.004 mm to 0.015 mmM3 × 0.5 mm101,000Rockwell C18DIN 7979C-m600000000000000
     
    5 mm Diameter
    10 mm0.004 mm to 0.015 mmM3 × 0.5 mm101,000Rockwell C18DIN 7979C-m60000000000000
    24 mm0.004 mm to 0.015 mmM3 × 0.5 mm101,000Rockwell C18DIN 7979C-m60000000000000
     
    6 mm Diameter
    16 mm0.004 mm to 0.015 mmM4 × 0.7 mm101,000Rockwell C18DIN 7979C-m600000000000000
    24 mm0.004 mm to 0.015 mmM4 × 0.7 mm101,000Rockwell C18DIN 7979C-m600000000000000
    30 mm0.004 mm to 0.015 mmM4 × 0.7 mm101,000Rockwell C18DIN 7979C-m600000000000000
    36 mm0.004 mm to 0.015 mmM4 × 0.7 mm101,000Rockwell C18DIN 7979C-m600000000000000
    40 mm0.004 mm to 0.015 mmM4 × 0.7 mm101,000Rockwell C18DIN 7979C-m600000000000000
     
    8 mm Diameter
    16 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000Rockwell C18DIN 7979C-m600000000000000
    20 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000Rockwell C18DIN 7979C-m600000000000000
    24 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000Rockwell C18DIN 7979C-m600000000000000
    30 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000Rockwell C18DIN 7979C-m600000000000000
    40 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000Rockwell C18DIN 7979C-m600000000000000
    50 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000Rockwell C18DIN 7979C-m600000000000000
    60 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000Rockwell C18DIN 7979C-m600000000000000
    100 mm0.006 mm to 0.015 mmM5 × 0.8 mm101,000Rockwell C18DIN 7979C-m600000000000000
     
    10 mm Diameter
    20 mm0.006 mm to 0.015 mmM6 × 1 mm101,000Rockwell C18DIN 7979C-m600000000000000
    40 mm0.006 mm to 0.015 mmM6 × 1 mm101,000Rockwell C18DIN 7979C-m600000000000000
    60 mm0.006 mm to 0.015 mmM6 × 1 mm101,000Rockwell C18DIN 7979C-m600000000000000
    80 mm0.006 mm to 0.015 mmM6 × 1 mm101,000Rockwell C18DIN 7979C-m600000000000000
     
    12 mm Diameter
    24 mm0.007 mm to 0.018 mmM6 × 1 mm101,000Rockwell C18DIN 7979C-m600000000000000
    40 mm0.007 mm to 0.018 mmM6 × 1 mm101,000Rockwell C18DIN 7979C-m600000000000000
    50 mm0.007 mm to 0.018 mmM6 × 1 mm101,000Rockwell C18DIN 7979C-m600000000000000
    80 mm0.007 mm to 0.018 mmM6 × 1 mm101,000Rockwell C18DIN 7979C-m600000000000000
     
    Spiral Shaft
    Image of Product. Front orientation. Dowel Pins. Pull-Out Removal, Tapped Head, Standard Tolerance, Vented, Spiral Shaft.
    For a more secure hold under vibration than flat-shaft pins, the spiral makes 360° contact with the hole.
    High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.
    18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Puller Handle—A complete removal tool requires a puller handle and a tip that fits your pin diameter. To use, thread a tip into the puller handle and then place the tip over the screw in your pin. Slide the weight along the handle to pull the pin out.
    Lg.
    Dia. Tolerance
    Thread
    Size
    Double Shear
    Breaking
    Strength, lbf
    Min.
    Hardness
    Specs. Met
    Each
    High-Strength Alloy Steel
     
    1/4" Diameter
    3/4"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.200000000000000
    1"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"8-32
    6,400Rockwell C47ASME B18.8.20000000000000
     
    5/16" Diameter
    3/4"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    1"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"10-32
    10,000Rockwell C47ASME B18.8.20000000000000
     
    3/8" Diameter
    1"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    1 3/4"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    2 1/4"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
    3"0.0001" to 0.0003"10-32
    14,300Rockwell C47ASME B18.8.20000000000000
     
    1/2" Diameter
    1"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    1 3/4"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    2 1/4"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    3"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
    3 1/2"0.0001" to 0.0003"1/4"-20
    25,500Rockwell C47ASME B18.8.20000000000000
     
    5/8" Diameter
    1 1/2"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.20000000000000
    2"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.20000000000000
    2 1/4"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.200000000000000
    3"0.0001" to 0.0003"1/4"-20
    39,000Rockwell C47ASME B18.8.200000000000000
     
    3/4" Diameter
    2"0.0001" to 0.0003"5/16"-18
    57,000Rockwell C47ASME B18.8.200000000000000
    2 1/2"0.0001" to 0.0003"5/16"-18
    57,000Rockwell C47ASME B18.8.200000000000000
    3"0.0001" to 0.0003"5/16"-18
    57,000Rockwell C47ASME B18.8.200000000000000
    4"0.0001" to 0.0003"5/16"-18
    57,000Rockwell C47ASME B18.8.200000000000000
     
    1" Diameter
    2"0.0001" to 0.0003"3/8"-16
    102,000Rockwell C47ASME B18.8.200000000000000
    3"0.0001" to 0.0003"3/8"-16
    102,000Rockwell C47ASME B18.8.200000000000000
    4"0.0001" to 0.0003"3/8"-16
    102,000Rockwell C47ASME B18.8.200000000000000
     
    18-8 Stainless Steel
     
    1/4" Diameter
    3/4"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    2"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"8-32
    Not RatedNot RatedASME B18.8.20000000000000
     
    5/16" Diameter
    3/4"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    1"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    2"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
     
    3/8" Diameter
    1"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    1 3/4"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    2"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    2 1/4"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.20000000000000
    3"0.0001" to 0.0003"10-32
    Not RatedNot RatedASME B18.8.200000000000000
     
    1/2" Diameter
    1"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/4"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.20000000000000
    1 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.20000000000000
    1 3/4"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.20000000000000
    2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.20000000000000
    2 1/4"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.20000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    3"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    3 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
     
    5/8" Diameter
    1 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.20000000000000
    2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    2 1/4"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    2 1/2"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
    3"0.0001" to 0.0003"1/4"-20
    Not RatedNot RatedASME B18.8.200000000000000
     
    3/4" Diameter
    2"0.0001" to 0.0003"5/16"-18
    Not RatedNot RatedASME B18.8.200000000000000
    2 1/2"0.0001" to 0.0003"5/16"-18
    Not RatedNot RatedASME B18.8.200000000000000
    3"0.0001" to 0.0003"5/16"-18
    Not RatedNot RatedASME B18.8.200000000000000
    4"0.0001" to 0.0003"5/16"-18
    Not RatedNot RatedASME B18.8.200000000000000
     
    1" Diameter
    2"0.0001" to 0.0003"3/8"-16
    Not RatedNot Rated__00000000000000
    3"0.0001" to 0.0003"3/8"-16
    Not RatedNot Rated__00000000000000
    4"0.0001" to 0.0003"3/8"-16
    Not RatedNot Rated__00000000000000