About Push-to-Close Latches
More
Paddle-Handle Push-to-Close Latches
Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.
For technical drawings and 3-D models, click on a part number.
For Cutout | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Mounting Fasteners Included | Each | |
Black Painted Steel | ||||||||||
| 1/4" | 5/16" | 2 3/16" | 2 13/16" | 2 11/16" | 3 5/16" | 1 3/8" | 5/16" | Yes | 00000000 | 000000 |
| 3/8" | 15/32" | 3 1/4" | 4 1/4" | 4" | 5" | 1 15/16" | 7/16" | Yes | 00000000 | 00000 |
Zinc-Plated Steel—Dull | ||||||||||
| 1/4" | 5/16" | 2 3/16" | 2 13/16" | 2 11/16" | 3 5/16" | 1 3/8" | 5/16" | Yes | 00000000 | 00000 |
| 3/8" | 15/32" | 3 1/4" | 4 1/4" | 4" | 5" | 1 15/16" | 7/16" | Yes | 00000000 | 00000 |
304 Stainless Steel—Dull | ||||||||||
| 1/16" | 1/8" | 1" | 1 9/16" | 1 1/8" | 1 3/4" | 5/16" | 7/16" | Yes | 00000000 | 00000 |
| 1/16" | 3/16" | 1 7/16" | 1 7/8" | 1 7/8" | 2 1/4" | 1" | 1/2" | Yes | 00000000 | 00000 |
| 1/4" | 5/16" | 2 3/16" | 2 13/16" | 2 11/16" | 3 5/16" | 1 7/16" | 5/16" | Yes | 00000000 | 00000 |
| 3/8" | 15/32" | 3 1/4" | 4 1/4" | 4" | 5" | 1 15/16" | 7/16" | Yes | 00000000 | 00000 |
For Cutout | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size  | Each | |
Nickel-Plated Steel—Dull | ||||||||||||
| 1/8" | 1/8" | 1 1/2" | 2" | 2" | 2 5/8" | 11/16" | 5/16" | 1 5/8", 2 1/4" | No | No. 6 | 000000 | 000000 |
For Cutout | Mounting Hole | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Ctr.-to-Ctr. | Thread Size | Dp. | Fasteners Included | Screw Size | Each | |
300 Series Stainless Steel—Dull | ||||||||||||||
| 3/16" | 3/16" | 3 1/8" | 2" | 3 5/16" | 2 1/4" | 1/2" | 1/4" | 2" | 8-32 | 0.25" | No | No. 8 | 00000000 | 0000000 |
To determine door mounting location, look at the outside face of the door: if the hinges are on the right, order a right-side latch; if the hinges are on the left, order a left-side latch.
For Cutout | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Door Mounting Location | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Projection | Rear Projection | Latch Bolt Projection | Mounting Hole Ctr.-to-Ctr. | Orientation | Fasteners Included | Screw Size | Each | |
Zinc-Plated Steel—Dull | |||||||||||||||
| 1/8" | Left Side | 1/4" | 1 15/16" | 1 3/8" | 3" | 1 3/8" | 3/4" | 1/2" | 1/4" | 2 1/2" | Vertical | No | No. 8 | 0000000 | 00000 |
| 1/8" | Right Side | 1/4" | 1 15/16" | 1 3/8" | 3" | 1 3/8" | 3/4" | 1/2" | 1/4" | 2 1/2" | Vertical | No | No. 8 | 0000000 | 0000 |
Ring-Handle Push-to-Close Latches
When released, the spring-loaded ring handle returns to its recessed position to stay out of the way. These latches open from the inside as well as the outside. From the outside, pull the recessed ring to unlatch. From the inside, slide the release tab on the back of the latch.
For technical drawings and 3-D models, click on a part number.
Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | Max. Latching Distance | For Through Hole Dia. | Dia. | Projection | Rear Projection | Latch Bolt Projection | Strike Plate Material | Fasteners Included | Screw Size | Each | |
Through-Hole Mount | |||||||||||
Black Plastic | |||||||||||
| 1/8"-1/4" | 1" | 2" | 2 7/16" | 1/8" | 1 7/16" | 1/4" | Stainless Steel | No | No. 10 | 0000000 | 000000 |
| 5/16"-7/16" | 1" | 2" | 2 7/16" | 1/8" | 1 7/16" | 1/4" | Stainless Steel | No | No. 10 | 0000000 | 00000 |
| 1/2"-5/8" | 1" | 2" | 2 7/16" | 1/8" | 1 7/16" | 1/4" | Stainless Steel | No | No. 10 | 0000000 | 00000 |
| 11/16"-7/8" | 1" | 2" | 2 7/16" | 1/8" | 1 7/16" | 1/4" | Stainless Steel | No | No. 10 | 0000000 | 00000 |
316 Stainless Steel—Polished | |||||||||||
| 1/8"-1/4" | 1" | 2" | 2 7/16" | 1/8" | 1 7/16" | 1/4" | Stainless Steel | No | No. 10 | 0000000 | 00000 |
| 5/16"-7/16" | 1" | 2" | 2 7/16" | 1/8" | 1 7/16" | 1/4" | Stainless Steel | No | No. 10 | 0000000 | 00000 |
| 1/2"-5/8" | 1" | 2" | 2 7/16" | 1/8" | 1 7/16" | 1/4" | Stainless Steel | No | No. 10 | 0000000 | 00000 |
| 11/16"-7/8" | 1" | 2" | 2 7/16" | 1/8" | 1 7/16" | 1/4" | Stainless Steel | No | No. 10 | 0000000 | 00000 |
Soft-Close Heavy Duty Roller Latches
To prevent doors from slamming, these latches are hydraulic. Mount them vertically at the top of walk-in freezer doors. The arm rolls into the strike plate as the door closes for a secure hold. A firm tug releases the roller and opens the door. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Heavy Duty Roller Latches
These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly. Mount them vertically at the top of walk-in freezer doors. The arm rolls into the strike plate as the door closes for a secure hold. A firm tug releases the roller and opens the door. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Push-to-Close Latches with Push-Button Release
Push in the knob to open these latches.
To open latches with a pull tab, push the knob and pull the tab.
For technical drawings and 3-D models, click on a part number.
Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Max. Latching Distance | For Through Hole Dia. | Dia. | Projection | Rear Projection | Latch Bolt Projection | Strike Plate Material | Fasteners Included | Screw Size | Each | |
Through-Hole Mount | |||||||||||
Black Plastic | |||||||||||
| 1/2" | 15/16" | 1" | 1 1/8" | 5/8" | 1 9/16" | 5/16" | Stainless Steel | No | No. 6 | 0000000 | 000000 |
Black Plastic with In-Line Pull Tab | |||||||||||
| 3/8" | 15/16" | 1" | 1 1/8" | 5/8" | 1 1/2" | 5/16" | Stainless Steel | No | No. 6 | 0000000 | 00000 |
Black Plastic with Perpendicular Pull Tab | |||||||||||
| 3/8" | 15/16" | 1" | 1 1/4" | 5/8" | 1 1/2" | 5/16" | Stainless Steel | No | No. 6 | 0000000 | 00000 |
Paddle-Handle Keyed Push-to-Close Locks
Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers. They're keyed alike, choose them if you need several locks that open with the same key.
For technical drawings and 3-D models, click on a part number.
For Cutout | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Mounting Fasteners Included | Key Number | No. of Keys Included | Each | |
Black Painted Steel | ||||||||||||
| 3/8" | 1/2" | 3 1/4" | 4 1/4" | 4" | 5" | 1 15/16" | 7/16" | Yes | CH751 | 2 | 00000000 | 000000 |
304 Stainless Steel—Dull | ||||||||||||
| 3/8" | 1/2" | 3 1/4" | 4 1/4" | 4" | 5" | 1 15/16" | 7/16" | Yes | CH751 | 2 | 00000000 | 00000 |
For Cutout | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Key Number | No. of Keys Included | Each | |
Nickel-Plated Steel—Dull | ||||||||||||||
| 1/8" | 1/8" | 1 1/2" | 3 3/16" | 2" | 3 1/2" | 11/16" | 5/16" | 1 5/8", 2 7/8" | No | No. 6 | CH501 | 1 | 000000 | 000000 |
For Cutout | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Projection | Rear Projection | Latch Bolt Projection | Mounting Fasteners Included | Key Number | No. of Keys Included | Each | |
Zinc-Plated Steel—Dull | |||||||||||||
| 1/8" | 1/4" | 1 3/8" | 1 15/16" | 1" | 2 3/4" | 7/8" | 1/2" | 1/4" | Yes | CAT60 | 2 | 0000000 | 000000 |
To determine door mounting location, look at the outside face of the door: if the hinges are on the right, order a right-side lock; if the hinges are on the left, order a left-side lock.
For Cutout | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Door Mounting Location | Wd. | Ht. | Wd. | Ht. | Projection | Rear Projection | Latch Bolt Projection | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Key Number | No. of Keys Included | Each | |
Zinc-Plated Steel—Dull | |||||||||||||||
| 1/8" | Left Side | 1 3/8" | 1 15/16" | 1 3/8" | 3" | 3/4" | 1/2" | 1/4" | 2 1/2" | No | No. 8 | CAT60 | 2 | 0000000 | 000000 |
| 1/8" | Right Side | 1 3/8" | 1 15/16" | 1 3/8" | 3" | 3/4" | 1/2" | 1/4" | 2 1/2" | No | No. 8 | CAT60 | 2 | 0000000 | 00000 |
Keyed Push-to-Close Locks with Push-Button-Release
To open, push in the knob and pull the tab. Choose these keyed alike locks if you need several that open with the same key.
For technical drawings and 3-D models, click on a part number.
Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Max. Latching Distance | For Through Hole Dia. | Dia. | Projection | Rear Projection | Latch Bolt Projection | Strike Plate Material | Fasteners Included | Screw Size | Key Number | Number of Keys Included | Each | |
Through-Hole Mount | |||||||||||||
Black Plastic | |||||||||||||
| 3/8" | 15/16" | 1" | 1 1/8" | 5/8" | 1 1/2" | 5/16" | Stainless Steel | No | No. 6 | CH751 | 2 | 0000000 | 000000 |
Push/Pull Door Levers
A slight push or pull on the lever opens your door. Levers are UL Listed for use with three-hour fire doors.
Select a lever with the correct backset distance (the distance from the door’s edge to the center of the lever's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.
For technical drawings and 3-D models, click on a part number.
Faceplate | Handle | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Material | Latch Bolt Projection | Ht. | Wd. | Lg. | Wd. | Projection | For Door Swing Direction | Mounting Hardware Included | Each | |
2 3/4" Backset Distance | |||||||||||
Schlage HL6 | |||||||||||
| 1 3/4" | Dull Chrome-Plated Zinc | 5/8" | 5 1/2" | 2 9/16" | 4 1/2" | 1 1/2" | 2 5/8" | Left, Right | Yes | 0000000 | 0000000 |
| 1 3/4" | Dull Stainless Steel | 5/8" | 5 1/2" | 2 9/16" | 4 1/2" | 1 1/2" | 2 5/8" | Left, Right | Yes | 0000000 | 000000 |
5" Backset Distance | |||||||||||
Schlage HL6 | |||||||||||
| 1 3/4" | Dull Chrome-Plated Zinc | 5/8" | 5 1/2" | 2 9/16" | 4 1/2" | 1 1/2" | 2 5/8" | Left, Right | Yes | 0000000 | 000000 |
| 1 3/4" | Dull Stainless Steel | 5/8" | 5 1/2" | 2 9/16" | 4 1/2" | 1 1/2" | 2 5/8" | Left, Right | Yes | 0000000 | 000000 |