McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    4 Products

    Taper-Lock Bushings

    Image of ProductInUse. Front orientation. Pulley and Sprocket Bushings. Taper-Lock Bushings.
    Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws. They are for use with taper-lock sprockets of the same bushing trade number. As you tighten the included set screws, the bushing grips the shaft and pulls it into your sprocket or pulley.
    Keyway,
    mm
    For Shaft
    Dia., mm
    Overall
    Wd., mm
    Wd.
    Dp.
    Taper
    Fastener Tightening
    Torque, in·lbf
    Includes
    Each
    Steel
     
    Bushing Trade Number 2012
    4532143.88°280Set Screws57095K561000000
     
    Bushing Trade Number 2517
    4544143.88°430Set Screws57095K58800000
     

    Corrosion-Resistant Flush-Mount Screw-Clamp Bushings

    Image of Product. Front orientation. Pulley and Sprocket Bushings. Corrosion-Resistant Flush-Mount Screw-Clamp Bushings.
    Image of Attribute. Side1 orientation. Contains Annotated. Corrosion-Resistant Flush-Mount Screw-Clamp Bushings.
    Insert these nickel-plated steel bushings into the bore of your sprocket for flush or recessed mounting in wet environments. When you tighten the included clamping screws on these bushings, their inner sleeve contracts onto the shaft and their outer sleeve expands to hold your sprocket, pulley, or gear. This keeps bushings from slipping during sudden starts and stops.
    For Shaft
    Dia., mm
    OD,
    mm
    Overall
    Wd., mm
    Max. Torque,
    in·lbf
    Fastener Tightening
    Torque, in·lbf
    Includes
    Each
    Nickel-Plated Steel
    45753215,900360Clamping Screws5515N150000000
     

    Flush-Mount Screw-Clamp Bushings

    Image of Product. Front orientation. Pulley and Sprocket Bushings. Flush-Mount Screw-Clamp Bushings.
    Image of Attribute. Side1 orientation. Contains Annotated. Flush-Mount Screw-Clamp Bushings.
    Insert these bushings into the bore of your sprocket for flush or recessed mounting. They handle shock loads. When you tighten the included clamping screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.
    For Shaft
    Dia., mm
    OD,
    mm
    Overall
    Wd., mm
    Max. Torque,
    in·lbf
    Fastener Tightening
    Torque, in·lbf
    Includes
    Each
    Steel
    45755428,700363Clamping Screws1070N160000000
     
    back to top