Gates Powergrip GT2 Pulleys

Filter by

System of Measurement

Inch

Metric

For Maximum Belt Width

Number of Teeth

Belt Trade Size

Pitch

Shaft Diameter

Tooth Profile

Pitch Diameter

Width

Bore Type

Number of Flanges

Material

Inside Width

Overall Width

Outside Width

Diameter

Idler Type

Shaft Type

Manufacturer Equivalent Series

RoHS

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

337 Products

Precision High-Torque GT Timing Belt Pulleys

Finished Bore

Bushing Bore

When precise synchronization is crucial, these pulleys minimize play (backlash). They’re often found in 3D printers, where accurate positioning is essential. Their curved teeth fit snugly with matching belts. Compared to pulleys with standard trapezoidal teeth, these pulleys transmit about three times more torque and run at higher speeds. All are compatible with Gates PowerGrip GT, 2GT, GT2, GT3, and GT4 series.

Iron—Strong but best for dry environments since moisture will cause them to rust.

Corrosion-Resistant Aluminum—Won't rust in wet environments and one-third the weight of steel and iron. However, aluminum pulleys are not as strong as iron and steel.

Finished Bore—Mount these pulleys onto the shaft and secure with a set screw—no machining required.

Bushing Bore—Quickly swap or service parts in tight spaces—no press-fitting or special tools required. Mount a bushing (sold separately) on your shaft and slide the pulley over it. As you tighten the included set screws, the bushing grips the shaft and draws it into the pulley, creating a final hold that is more secure than with set screws alone.

						For Bushing
	For Max. Belt Wd., mm	Pitch, mm	No. of Teeth	Bore Type	For Shaft Dia.	Type	Trade No.	OD, mm	No. of Flanges	Hub Type		Each
For 2MGT Trade Size







				Corrosion-Resistant Aluminum

				6	2	12	Finished	1/8"	—	—	12.2	1	Standard	00000000	000000


				6	2	14	Finished	1/8"	—	—	13.5	1	Standard	00000000	00000
				6	2	15	Finished	3/16"	—	—	14.1	1	Standard	00000000	00000
				6	2	16	Finished	3/16"	—	—	14.7	1	Standard	00000000	00000
				6	2	16	Finished	5 mm	—	—	13.9	1	Standard	0000000	0000
				6	2	17	Finished	1/4"	—	—	16.1	1	Standard	00000000	00000
				6	2	18	Finished	1/4"	—	—	16.1	1	Standard	00000000	00000
				6	2	20	Finished	1/4"	—	—	17.4	1	Standard	00000000	00000
				6	2	20	Finished	5 mm	—	—	15	1	Standard	0000000	0000
				6	2	24	Finished	1/4"	—	—	20.1	2	Standard	00000000	00000
				6	2	26	Finished	1/4"	—	—	21.3	2	Standard	00000000	00000


				6	2	28	Finished	1/4"	—	—	22.7	2	Standard	0000000	00000
				6	2	32	Finished	1/4"	—	—	25.4	2	Standard	00000000	00000
				6	2	36	Finished	1/4"	—	—	28.1	2	Standard	00000000	00000
				6	2	40	Finished	1/4"	—	—	30.7	2	Standard	00000000	00000
				6	2	48	Finished	1/4"	—	—	36.1	2	Standard	00000000	00000
				6	2	50	Finished	1/4"	—	—	37.3	2	Standard	00000000	00000
				6	2	60	Finished	1/4"	—	—	43.9	2	Standard	00000000	00000
				6	2	72	Finished	1/4"	—	—	45.3	—	Standard	00000000	00000
				6	2	100	Finished	5/16"	—	—	63.1	—	Standard	00000000	00000
				6	2	120	Finished	3/8"	—	—	75.9	—	Standard	00000000	00000


				9	2	20	Finished	5 mm	—	—	15	1	Standard	0000000	0000
				12	2	20	Finished	5 mm	—	—	15	1	Standard	0000000	0000


				For 3MGT Trade Size







								Corrosion-Resistant Aluminum

								9	3	16	Finished	3/16"	—	—	18	1	Standard	00000000	00000


								9	3	16	Finished	1/4"	—	—	18	1	Standard	00000000	00000
								9	3	17	Finished	1/4"	—	—	18.8	1	Standard	00000000	00000
								9	3	18	Finished	1/4"	—	—	20.1	2	Standard	00000000	00000
								9	3	20	Finished	1/4"	—	—	22.7	2	Standard	00000000	00000
								9	3	22	Finished	1/4"	—	—	24	2	Standard	00000000	00000
								9	3	24	Finished	1/4"	—	—	26	2	Standard	0000000	00000
								9	3	25	Finished	1/4"	—	—	26.9	2	Standard	00000000	00000
								9	3	26	Finished	1/4"	—	—	28.1	2	Standard	00000000	00000
								9	3	28	Finished	1/4"	—	—	29.8	2	Standard	00000000	00000
								9	3	30	Finished	1/4"	—	—	31.8	2	Standard	00000000	00000


9	3							32	Finished	1/4"	—	—	33.6	2	Standard	00000000	00000
9	3							34	Finished	1/4"	—	—	35.5	2	Standard	00000000	00000
9	3							36	Finished	1/4"	—	—	37.4	2	Standard	00000000	00000
9	3							40	Finished	1/4"	—	—	41.3	2	Standard	00000000	00000
9	3	44						Finished	1/4"	—	—	45.1	2	Standard	0000000	00000
9	3	45	Finished					1/4"	—	—	45.1	2	Standard	00000000	00000
9	3	48	Finished					5/16"	—	—	45.1	—	Standard	00000000	00000
9	3	50	Finished					5/16"	—	—	47	—	Standard	00000000	00000
9	3	56	Finished					5/16"	—	—	52.7	—	Standard	00000000	00000
9	3	60	Finished					5/16"	—	—	56.5	—	Standard	00000000	00000


9	3	72	Finished					5/16"	—	—	68	—	Standard	00000000	00000
9	3	80	Finished					5/16"	—	—	75.6	—	Standard	00000000	00000
9	3	90	Finished					5/16"	—	—	85.2	—	Standard	00000000	00000
9	3	100	Finished					5/16"	—	—	94.7	—	Standard	0000000	00000
9	3	120	Finished					5/16"	—	—	113.8	—	Standard	00000000	00000


For 14MGT Trade Size







								Iron

								40	14	28	Bushing	—	Taper Lock	2012	141.3	2	—	00000000	000000


								40	14	46	Bushing	—	Taper Lock	2517	213.2	2	—	00000000	000000
								40	14	72	Bushing	—	Taper Lock	3020	335	2	—	00000000	000000

Bushings

Taper-Lock

Bushing

Bushing
Type	Trade No.	For Shaft Dia.		Each
Taper Lock	2012	1/2"	000000000	000000
Taper Lock	2012	5/8"	000000000	00000
Taper Lock	2012	3/4"	000000000	00000
Taper Lock	2012	7/8"	000000000	00000
Taper Lock	2012	15/16"	000000000	00000
Taper Lock	2012	1"	000000000	00000
Taper Lock	2012	1 1/8"	000000000	00000
Taper Lock	2012	1 3/16"	000000000	00000
Taper Lock	2012	1 1/4"	000000000	00000
Taper Lock	2012	1 3/8"	000000000	00000
Taper Lock	2012	1 7/16"	000000000	00000
Taper Lock	2012	1 1/2"	000000000	00000
Taper Lock	2012	1 9/16"	000000000	00000
Taper Lock	2012	1 5/8"	000000000	00000
Taper Lock	2012	1 11/16"	000000000	00000
Taper Lock	2012	1 3/4"	000000000	00000
Taper Lock	2012	1 7/8"	000000000	00000
Taper Lock	2012	1 15/16"	000000000	00000
Taper Lock	2012	2"	000000000	00000
Taper Lock	2012	2 1/8"	000000000	00000
Taper Lock	2012	20 mm	000000000	00000
Taper Lock	2012	22 mm	000000000	00000
Taper Lock	2012	24 mm	000000000	00000
Taper Lock	2012	25 mm	000000000	00000
Taper Lock	2012	28 mm	000000000	00000
Taper Lock	2012	30 mm	000000000	00000
Taper Lock	2012	32 mm	000000000	00000
Taper Lock	2012	35 mm	000000000	00000
Taper Lock	2012	38 mm	000000000	00000
Taper Lock	2012	40 mm	000000000	00000
Taper Lock	2012	42 mm	000000000	00000
Taper Lock	2012	45 mm	000000000	00000
Taper Lock	2012	50 mm	000000000	00000
Taper Lock	2517	3/4"	000000000	00000
Taper Lock	2517	7/8"	000000000	00000
Taper Lock	2517	1"	000000000	00000
Taper Lock	2517	1 1/8"	000000000	00000
Taper Lock	2517	1 3/16"	000000000	00000
Taper Lock	2517	1 1/4"	000000000	00000
Taper Lock	2517	1 5/16"	000000000	00000
Taper Lock	2517	1 3/8"	000000000	00000
Taper Lock	2517	1 7/16"	000000000	00000
Taper Lock	2517	1 1/2"	000000000	00000
Taper Lock	2517	1 5/8"	000000000	00000
Taper Lock	2517	1 11/16"	000000000	00000
Taper Lock	2517	1 3/4"	000000000	00000
Taper Lock	2517	1 13/16"	000000000	00000
Taper Lock	2517	1 7/8"	000000000	00000
Taper Lock	2517	1 15/16"	000000000	00000
Taper Lock	2517	2"	000000000	00000
Taper Lock	2517	2 1/8"	000000000	00000
Taper Lock	2517	2 3/16"	000000000	00000
Taper Lock	2517	2 1/4"	000000000	00000
Taper Lock	2517	2 3/8"	000000000	00000
Taper Lock	2517	2 7/16"	000000000	00000
Taper Lock	2517	2 1/2"	000000000	00000
Taper Lock	2517	2 5/8"	000000000	000000
Taper Lock	2517	2 11/16"	000000000	000000
Taper Lock	2517	24 mm	000000000	00000
Taper Lock	2517	25 mm	000000000	00000
Taper Lock	2517	30 mm	000000000	00000
Taper Lock	2517	32 mm	000000000	00000
Taper Lock	2517	35 mm	000000000	00000
Taper Lock	2517	38 mm	000000000	00000
Taper Lock	2517	40 mm	000000000	00000
Taper Lock	2517	42 mm	000000000	00000
Taper Lock	2517	45 mm	000000000	00000
Taper Lock	2517	48 mm	000000000	00000
Taper Lock	2517	50 mm	000000000	00000
Taper Lock	3020	1"	000000000	00000
Taper Lock	3020	1 1/8"	000000000	00000
Taper Lock	3020	1 1/4"	000000000	00000
Taper Lock	3020	1 3/8"	000000000	00000
Taper Lock	3020	1 7/16"	000000000	00000
Taper Lock	3020	1 1/2"	000000000	00000
Taper Lock	3020	1 5/8"	000000000	00000
Taper Lock	3020	1 3/4"	000000000	00000
Taper Lock	3020	1 7/8"	000000000	00000
Taper Lock	3020	1 15/16"	000000000	00000
Taper Lock	3020	2"	000000000	00000
Taper Lock	3020	2 1/8"	000000000	00000
Taper Lock	3020	2 3/8"	000000000	00000
Taper Lock	3020	2 7/16"	000000000	00000
Taper Lock	3020	2 1/2"	000000000	00000
Taper Lock	3020	2 3/4"	000000000	00000
Taper Lock	3020	2 7/8"	000000000	00000
Taper Lock	3020	2 15/16"	000000000	00000
Taper Lock	3020	3"	000000000	00000
Taper Lock	3020	40 mm	000000000	00000
Taper Lock	3020	48 mm	000000000	00000
Taper Lock	3020	55 mm	000000000	00000

GT Timing Belt Idler Pulleys

Toothed

Without Teeth

Get pitch-perfect compatibility with these free-spinning pulleys. They mesh with belts that have curved GT-profile teeth, reducing vibration and wear. As they rotate on their bearings, these pulleys press up against belts to reduce slack and keep the system moving smoothly. All are compatible with GatesPowerGrip GT, 2GT, GT2, GT3, and GT4 series. Idler pulleys are often used with belt tensioners.

Iron—Strong, but best for dry environments since moisture will cause them to rust.

Corrosion-Resistant Aluminum—Lightweight and resist rust in wet environments. Although aluminum pulleys are one-third the weight of iron pulleys, they aren't as strong.

Without Teeth—These pulleys press against the smooth side of the belt instead of the toothed side to maintain tension.

						Toothed			Without Teeth
	For Max. Belt Wd., mm	Pitch, mm	For Shaft Dia., mm	OD, mm	Bearing Type	No. of Teeth		Each		Each
For 2MGT Trade Size







				Corrosion-Resistant Aluminum

				6	2	3	15	Ball	20	00000000	00000	00000000	00000


				6	2	5	15	Ball	20	0000000	0000	0000000	0000
				9	2	3	15	Ball	20	00000000	0000	00000000	0000
				9	2	5	15	Ball	20	0000000	0000	0000000	0000
				12	2	3	15	Ball	20	00000000	0000	00000000	0000
				12	2	5	15	Ball	20	0000000	0000	0000000	0000


				For 8MGT Trade Size







								Iron

								20	8	20	90	Roller	32	0000000	000000	———	0


								30	8	30	100	Roller	36	0000000	000000	———	0
								62	8	30	100	Roller	36	0000000	000000	———	0


								For 14MGT Trade Size







												Iron

												37	14	40	146	Roller	30	0000000	000000	———	0

Precision High-Torque GT Timing Belts

When precision timing is crucial, these timing belts minimize play (backlash). They’re often found in 3D printers, where accurate positioning is essential. Their curved teeth fit snugly with matching pulleys. Compared to belts with standard trapezoidal teeth, these belts transmit about three times more torque and run at higher speeds. All are compatible with Gates PowerGrip GT, 2GT, GT2, GT3, and GT4 series.

Neoprene—Durable and weather resistant, but lose elasticity if exposed to oil and fuel. These belts are reinforced, so they're strong enough to transmit power without stretching. Plus, nylon-coated teeth minimize friction and protect the surface from wear.

	Wd., mm	Outer Circle, mm	No. of Teeth	Pitch, mm	Reinforcement Material	Tooth Finish	Temp. Range, ° F		Each
Neoprene







				2MGT Trade Size

				6	100	50	2	Fiberglass	Nylon Coated	-30 to 180	00000000	00000


				6	112	56	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	124	62	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	126	63	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	134	67	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	136	68	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	140	70	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	152	76	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	158	79	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	160	80	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	164	82	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000


				6	172	86	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	180	90	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	186	93	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	192	96	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	200	100	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	202	101	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	212	106	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	220	110	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	232	116	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	236	118	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000


				6	240	120	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	250	125	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	252	126	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	258	129	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	280	140	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	300	150	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	320	160	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	332	166	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	350	175	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	370	185	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000


				6	380	190	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	400	200	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	420	210	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	456	228	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	488	244	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	504	252	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	528	264	2	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
				6	552	276	2	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
				6	576	288	2	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
				6	600	300	2	Fiberglass	Nylon Coated	-30 to 180	00000000	00000


				6	640	320	2	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
				6	696	348	2	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
				6	744	372	2	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
				6	848	424	2	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
6				1,164	582	2	Fiberglass	Nylon Coated	-30 to 180	00000000	00000




		3MGT Trade Size

		9	99	33	3	Fiberglass	Nylon Coated	-30 to 180	00000000	0000


		9	123	41	3	Fiberglass	Nylon Coated	-30 to 180	00000000	0000
		9	165	55	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	180	60	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	183	61	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	189	63	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	201	67	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	219	73	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	225	75	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	240	80	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	243	81	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000


		9	255	85	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	267	89	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	282	94	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	291	97	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	300	100	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	339	113	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	348	116	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	357	119	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	360	120	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	375	125	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000


		9	393	131	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	414	138	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	420	140	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	450	150	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	474	158	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	480	160	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	483	161	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	504	168	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	537	179	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	552	184	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000


		9	564	188	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	600	200	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	630	210	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	684	228	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	735	245	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	840	280	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	945	315	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	1,050	350	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	1,080	360	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000
		9	1,536	512	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000


		9	2,061	687	3	Fiberglass	Nylon Coated	-30 to 180	00000000	00000




				8MGT Trade Size

				20	480	60	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000


20	560			70	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	600			75	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	640			80	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	720			90	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	800			100	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	840			105	8	Fiberglass	Nylon Coated	-22 to 212	0000000	00000
20	880			110	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	920			115	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	960			120	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	1,040			130	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000


20	1,064			133	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	1,120			140	8	Fiberglass	Nylon Coated	-22 to 212	0000000	00000
20	1,160			145	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	1,200			150	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	1,224			153	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	1,280			160	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	1,440			180	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	1,512			189	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	1,584			198	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	1,600			200	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000


20	1,760			220	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	1,800			225	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
20	2,000			250	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
20	2,200			275	8	Fiberglass	Nylon Coated	-22 to 212	0000000	000000
20	2,400			300	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
20	2,600			325	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
20	2,800			350	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
20	3,280			410	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
20	3,600			450	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
20	4,400			550	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000


30	480			60	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
30	560			70	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
30	600			75	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
30	640			80	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
30	720			90	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
30	800			100	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
30	840			105	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
30	880			110	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
30	920			115	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
30	960			120	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000


30	1,040			130	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
30	1,064			133	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
30	1,120			140	8	Fiberglass	Nylon Coated	-22 to 212	0000000	00000
30	1,160			145	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
30	1,200			150	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
30	1,224			153	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
30	1,280			160	8	Fiberglass	Nylon Coated	-22 to 212	00000000	00000
30	1,440			180	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
30	1,512			189	8	Fiberglass	Nylon Coated	-22 to 212	0000000	000000
30	1,584	198		8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
30	1,600	200	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
30	1,760	220	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
30	1,800	225	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
30	2,000	250	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
30	2,200	275	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
30	2,400	300	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
30	2,600	325	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
30	2,800	350	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
30	3,280	410	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	720	90	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	800	100	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	880	110	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	920	115	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	960	120	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	1,040	130	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	1,064	133	8	Fiberglass	Nylon Coated	-22 to 212	0000000	000000
50	1,120	140	8	Fiberglass	Nylon Coated	-22 to 212	0000000	000000
50	1,160	145	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	1,200	150	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	1,224	153	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	1,280	160	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	1,440	180	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	1,512	189	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	1,584	198	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	1,600	200	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	1,760	220	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	1,800	225	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	2,000	250	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	2,200	275	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	2,400	300	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	2,600	325	8	Fiberglass	Nylon Coated	-22 to 212	00000000	000000
50	3,280	410	8	Fiberglass	Nylon Coated	-22 to 212	0000000	000000



		14MGT Trade Size

		40	1,190	85	14	Fiberglass	Nylon Coated	-30 to 180	00000000	000000


		40	1,400	100	14	Fiberglass	Nylon Coated	-30 to 180	00000000	000000
		55	2,100	150	14	Fiberglass	Nylon Coated	-30 to 180	00000000	000000
		55	4,578	327	14	Fiberglass	Nylon Coated	-30 to 180	00000000	00000000

Precision High-Torque GT Cut-to-Length Timing Belts

Best for custom setups that demand powerful, controlled motion. Use these timing belts for linear applications or join the ends to create a custom belt. Their curved teeth fit snugly with matching pulleys to minimize play (backlash). That means these belts respond precisely to starts and stops, making them ideal for applications such as 3D printers. Compared to belts with trapezoidal teeth, these belts transmit about three times as much torque and run at higher speeds. All are compatible with Gates PowerGrip GT, 2GT, GT2, GT3, and GT4 series.

	Tooth Finish	Temp. Range, ° F		500 mm Long	1,000 mm Long	2,000 mm Long	3,000 mm Long
Neoprene







	2MGT Trade Size

	6	2	Fiberglass	Nylon Coated	-22 to 212	000000	00000	000000	000000	000000


	9	2	Fiberglass	Nylon Coated	-22 to 212	000000	0000	00000	00000	00000
	12	2	Fiberglass	Nylon Coated	-22 to 212	000000	00000	00000	00000	00000