4/10 hp Pumps | McMaster-Carr

Filter by

Voltage

For Use With

Pump Activation Type

Power Source

Maximum Flow Rate @ 10 Feet of Head

Pump Type

Discharge Connection Port

Maximum Flow Rate @ 15 Feet of Head

Discharge Pipe Size

Maximum Flow Rate @ 20 Feet of Head

Maximum Feet of Head

Intake Connection Port

Intake Type

Electrical Phase

Housing Material

Maximum Solids Diameter

Maximum Flow Rate

Horsepower

Maximum Temperature

Current

Thermal Protection

Cord Length

Discharge Connection

Forward

How can we improve?

16 Products

About Sump, Water-Removal, Condensate, and Submersible Pumps

About Drum Pumps

These pumps are C-UL listed for Class I, Division 2, Group D for use in environments with flammable gases. Operating on a 12-volt battery, use them to transfer and drain fuel such as gasoline, diesel fuel, and kerosene. Lock the nozzle with a padlock (not included).

Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.

Pumps with automatic shut-off nozzle turn off when the tank is full.

			Temp. Range, °F							Intake			Discharge (Hose and Nozzle)
Flow Rate, gpm	Discharge Pressure, psi	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	Max. Lift, ft.	For Drum Opening Size	Includes	Pipe Size	Gender	Thread Type	ID	Lg., ft.	Nozzle Type	Max. Shackle Dia.	Thermal Protection		Each
12V DC
25	20	10	-20°	125°	4/10 hp	35	15	2 NPT	18-ft. Battery Cable, Drum Connector	1	Female	NPT	1"	18	Automatic Shut-Off, Lockable	5/16"	With Thermal Overload Protection	0000000	000000000
25	20	10	-20°	125°	4/10 hp	35	15	2 NPT	18-ft. Battery Cable, Drum Connector	1	Female	NPT	1"	18	Manual Shut-Off, Lockable	5/16"	With Thermal Overload Protection	0000000	000000

Water Removal Pumps with Hose

Use this pump to remove water with small solids up to 1/4" in diameter. It activates when plugged in; add a plug-in switch to control when the pump activates. Install in water that's at least 2" deep. Pump includes a 25-ft. hose with cam-and-groove fittings for quick, secure connections and a storage crate with built-in filtration to protect the pump from debris.

Note: Pump must be filled with liquid before use. It needs a constant flow of liquid and cannot run dry.

Max. Flow Rate, gpm											Discharge		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	Max. Flow Rate	Max. Ft. of Head, ft.	Max. Solids Dia.	Removes Water Down To	Temp. Range, °F	Horsepower	Current, A	Connection Coupling Size	Gender	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—Without Thermal Overload Protection
Plug with 15" Cord
41	32	23	11	41 gpm	25	1/4"	7/16"	35° to 100°	4/10 hp	3	1 1/4	Male	12 3/4"	11 13/16"	15 3/4"	0000000	0000000

High-Flow Sump Pumps for Sewage Water with Replaceable Float Switch

These pumps provide about 25% more flow than standard float-switch activated pumps for sewage water. The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Pumps are equipped with a large intake and rugged impeller to transfer raw sewage water with solids up to 2" in diameter. They have a cast iron housing that stands up to demanding environments. Pumps can run dry.

Max. Flow Rate, gpm					Level						Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 15 ft. Cord
120	96	65	26	2"	13"	6"	35° to 75°	2/5 hp	12	Open	2	NPT	Female	24"	30"	17"	8"	11"	0000000	0000000

Sump Pumps without Float Switch for Sewage Water

Pumps activate when plugged in. You can add a plug-in switch to control when the pump activates. Equipped with a large intake and rugged impeller, these pumps transfer raw sewage water with solids up to 2" in diameter. They have a cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Max. Flow Rate, gpm									Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 20 ft. Cord
100	80	60	20	2"	35° to 140°	2/5 hp	8	Open	2	NPT	Female	18"	24"	14"	10"	9"	00000000	0000000

Float-Switch Activated Sump Pumps for Sewage Water

Equipped with a large intake and a rugged impeller, this pump transfers raw sewage water with solids up to 2" in diameter. It has a cast iron housing that stands up to demanding environments. The float switch is wired to the pump. Submerge while in use and do not run dry.

Max. Flow Rate, gpm					Level						Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 20 ft. Cord
100	80	60	20	2"	13"	8"	35° to 140°	4/10 hp	8	Open	2	NPT	Female	18"	30"	14 1/2"	11"	9"	00000000	0000000

Sump Pumps for Sewage Water with Replaceable Float Switch

The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Equipped with a large intake and rugged impeller, these pumps transfer raw sewage water with solids up to 2" in diameter. They have a cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Max. Flow Rate, gpm					Level						Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 20 ft. Cord
100	80	60	20	2"	19"	11"	35° to 140°	2/5 hp	8	Open	2	NPT	Female	18"	24"	14"	10"	9"	00000000	0000000

Sump Pumps with Basin for Sewage Water

Convenient for applications where a sump pit is impractical, these pumps include a basin with a vent on top. They handle raw sewage water with solids up to 2" in diameter. The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump.

Max. Flow Rate, gpm					Level							Discharge			O'all
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	Max. Feet of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Cap., gal.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 10 ft. Cord
125	100	65	20	2"	11 1/2"	4 1/2"	41	35° to 100°	2/5 hp	12	Open	2	NPT	Female	24"	29"	25"	0000000	0000000

High-Flow Sump Pumps without Switch for Water with Small Solids

Use these pumps to move higher volumes of water with solids than other sump pumps. They activate when plugged in; add a plug-in switch to control when the pump activates. Also known as effluent pumps, they accommodate solids up to 3/4" in diameter. They are often used with liquid waste that has passed through a septic tank, so most solids are removed. Pumps have an epoxy-coated cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Max. Flow Rate, gpm									Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 20 Ft. of Head	@ 30 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 20 ft. Cord
70	65	50	26	40	3/4"	35° to 140°	2/5 hp	7.5	1 1/2	NPT	Female	18"	24"	11"	9"	8"	00000000	0000000

Sump Pumps for Water with Small Solids with Replaceable Float Switch

The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Also known as effluent pumps, these accommodate solids up to 3/4" in diameter. They’re often used with liquid waste that has passed through a septic tank, so most solids are removed. All have an epoxy-coated cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Max. Flow Rate, gpm						Level					Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 20 Ft. of Head	@ 30 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn-On	Turn-Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 20 ft. Cord
70	65	50	26	40	3/4"	12"	6"	35° to 140°	2/5 hp	7.5	1 1/2	NPT	Female	18"	24"	11"	9"	8"	00000000	0000000

Sump Pumps with Basin for Water with Small Solids

Convenient for applications where a sump pit is impractical, this pump includes a basin with a vent on top. It has a float switch with a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Also known as an effluent pump, it accommodates solids up to 3/4" in diameter. It is often used with liquid waste that has passed through a septic tank, so most solids are removed.

Sump Pumps

Sump Pump

Max. Flow Rate						Level						Intake (NPT)		Discharge (NPT)		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 20 Ft. of Head	@ 30 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Capacity, gal.	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Gender	Pipe Size	Gender	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 10 ft. Cord
70	65	50	26	40	3/4"	10"	5"	5	35° to 125°	2/5 hp	7.5	1 1/2	Female	1 1/2	Female	16"	15"	15"	0000000	0000000