115V AC Pumps | McMaster-Carr

Filter by

Voltage

For Use With

Power Source

Flow Rate @ 10 Feet of Head

Discharge Connection

Maximum Flow Rate

Pump Type

Positive Displacement

Discharge Pipe Size

Maximum Pressure

Intake Connection

Intake Connection Port

Intake Pipe Size

Current

Frequency

Power

Discharge Connection Port

Electrical Phase

Maximum Feet of Head

Maximum Flow Rate @ 10 Feet of Head

Priming Type

Pump Style

Flow Rate

Less than 10,000 gal/day

40,000 gal/day or greater

Export Control Classification Number (ECCN)

DFARS Specialty Metals

REACH

RoHS

Compliant with Exemptions

Not Compliant

Forward

How can we improve?

67 Products

How to Prime Your Pump

How to Determine Feet of Head

About Vacuum Pumps

About Process Pumps

About Sump, Water-Removal, Condensate, and Submersible Pumps

About Drum Pumps

Low-Maintenance Plastic Circulation Pumps for Water and Coolants

Eliminate seal wear and leakage with pumps that use magnets to turn the impeller. They’re often used with electroplating and photographic solutions. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

Pumps With Tube Connections (Top Intake)

With Tube Connections (Top Intake)

	Flow Rate, gpm							Intake			Discharge			Overall
Max. Flow Rate, gpm	@ 5 ft. of Head	@ 10 ft. of Head	Max. ft of Head	Max. Pressure, psi	Max. Viscosity, cP	Temp. Range, °F	Current, A	Tube Connection Type	Gender	For Tube ID	Tube Connection Type	Gender	For Tube ID	Lg.	Wd.	Ht.		Each
115V AC, Single Phase—With Thermal Overload Protection
Plug
3	1	0.1	10.6	4	20	35° to 150°	0.8	Barbed	Male	1/2"	Barbed	Male	1/2"	6 3/4"	3 3/4"	4 7/8"	0000000	0000000

Pumps With Pipe Connections

With Pipe Connections

	Flow Rate, gpm								Intake			Discharge			Overall
Max. Flow Rate, gpm	@ 10 ft. of Head	@ 20 ft. of Head	Max. ft. of Head	Max. Pressure, psi	Max. Viscosity, cP	Temp. Range, °F	hp	Current, A	Pipe Size	Gender	Thread Type	Pipe Size	Gender	Thread Type	Lg.	Wd.	Ht.		Each
115V AC, Single Phase—With Thermal Overload Protection
Plug
9	5	__	16.1	7	20	35° to 150°	1/20 hp	1.4	1/2	Female	NPT	1/2	Male	NPT	8 7/8"	3 3/4"	4 7/8"	0000000	0000000
14	11	4	24.7	10	20	35° to 150°	1/10 hp	1.7	1	Female	NPT	1/2	Male	NPT	9 5/8"	5 1/2"	4 7/8"	0000000	000000

Constant-Flow-Rate Pumps for Water

Also known as gear pumps, these produce a smooth flow of liquid for applications such as cooling engines, powering hydraulic equipment, and extracting liquid from holding tanks. Pumps are self-priming after you fill the pump chamber with liquid. As liquid in the chamber is expelled, a suction force is created which allows the pump to draw liquid upward. Do not use with solids. Pumps can be used in dusty, dirty, and damp environments.

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry. If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

For technical drawings and 3-D models, click on a part number.

						Intake (NPT)		Discharge (NPT)			Overall
Max. Flow Rate, gpm	Discharge Pressure, psi	Max. Viscosity, cP	Temp. Range, °F	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Motor Enclosure Type	Lg.	Wd.	Ht.		Each
115/230V AC, Single Phase—Without Thermal Overload Protection
Hardwire
2.1	150	100,000	32° to 140°	1/2	7.4/3.7	1/4	Female	1/4	Female	Totally Enclosed	16 1/16"	8 3/16"	8"	0000000	000000000
8.5	150	100,000	32° to 140°	1	12.8/6.4	1/2	Female	1/2	Female	Totally Enclosed	18 1/8"	9 3/16"	9"	0000000	00000000

Sanitary Electric Drum Pumps

Nylon Plastic Housing

Commonly used in food, beverage, pharmaceutical, and cosmetic processing, these pumps are designed for sanitary environments. The discharge connection can be easily disassembled for cleaning. Pumps do not include a drum connector.

Pumps that are 3-A certified meet sanitary design standards. Those that are CSA certified meet stringent safety standards.

For technical drawings and 3-D models, click on a part number.

				Temp. Range, °F					Intake		Discharge
Flow Rate, gpm	Discharge Pressure, psi	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	For Drum Opening Size, mm	Tube OD	Tube Lg.	Tube Connection Type	For Tube OD	Thermal Protection	Specifications Met		Each
115V AC, Single Phase—Hardwire
Nylon Plastic Housing
31	10	55	1,000	15°	175°	1 hp	4.2	38	1 1/2"	39"	Quick Clamp	1 1/2"	With Thermal Overload Protection	3-A Certified 02-11; CSA Certified	0000000	000000000

Easy-Carry Water-Removal Pumps without Switch

These pumps activate when plugged in. You can add a plug-in switch to control when the pump activates. Use the handle to carry pumps from job to job. Install in debris-free water that’s at least 3/4" deep. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

Max. Flow Rate, gpm									Discharge			Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	Max. Ft. of Head, ft.	Removes Water Down To	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Ht.	Wd.	Lg.		Each
115V AC, Single Phase—With Thermal Overload Protection
Plug with 10 ft. Cord
23	20	14	9	26	1/8"	35° to 120°	1/6 hp	2	1	NPT	Female	8"	6"	4.3"	00000000	0000000
Plug with 25 ft. Cord
18	17	14	9	26.3	1/8"	35° to 120°	1/6 hp	5	1	NPT	Female	8"	7"	5"	00000000	000000

Fixed-Flow-Rate Metering Pumps for Chemicals

Also known as peristaltic pumps and tubing pumps, these maintain a fixed flow rate. Pumps are self-priming, which means they create a suction force to draw liquid upward and fill the pump chamber. Mount them up to 25 feet above your liquid source. All can run dry. Do not use with solids.

Pumps with Tygon 2375 lining resist harsh substances such as isopropyl alcohol and sodium chloride.

Pumps with Viton® fluoroelastomer tubing withstand oil such as gasoline and hydraulic oil.

Pumps

						Overall
Flow Rate, gal./day (For Tube ID)	Max. Pressure, psi	Max. Viscosity, cP	Temp. Range, °F	Horsepower	Current, A	Lg.	Wd.	Ht.	Includes		Each
115V AC,Single Phase—Plug
Polypropylene Plastic and Tygon Wetted Parts Material
0.07 (1/16") 0.25 (1/8")	30	800	32° to 122°	Subfractional	0.03	5 1/2"	3 1/4"	3 3/4"	4 1/2" Lg. of 1/16" ID Tygon Tubing with Tygon 2375 Lining (Shore A60), 4 1/2" Lg. of 1/8" ID Tygon Tubing with Tygon 2375 Lining (Shore A60)	000000000	0000000
0.34 (1/16") 1.25 (1/8")	30	800	32° to 122°	Subfractional	0.03	5 1/2"	3 1/4"	3 3/4"	4 1/2" Lg. of 1/16" ID Tygon Tubing with Tygon 2375 Lining (Shore A60), 4 1/2" Lg. of 1/8" ID Tygon Tubing with Tygon 2375 Lining (Shore A60)	000000000	000000
0.87 (1/16") 3.53 (1/8") 6.84 (3/16")	30	800	32° to 122°	Subfractional	0.03	5 1/2"	3 1/4"	3 3/4"	6" Lg. of 1/16" ID Tygon Tubing with Tygon 2375 Lining (Shore A60), 6" Lg. of 1/8" ID Tygon Tubing with Tygon 2375 Lining (Shore A60), 6" Lg. of 3/16" ID Tygon Tubing with Tygon 2375 Lining (Shore A60)	000000000	000000
1.75 (1/16") 7.07 1/8") 13.68 (3/16")	30	800	32° to 122°	Subfractional	0.03	5 1/2"	3 1/4"	3 3/4"	6" Lg. of 1/16" ID Tygon Tubing with Tygon 2375 Lining (Shore A60), 6" Lg. of 1/8" ID Tygon Tubing with Tygon 2375 Lining (Shore A60), 6" Lg. of 3/16" ID Tygon Tubing with Tygon 2375 Lining (Shore A60)	000000000	000000
22.80 (3/16") 38.00 (1/4")	15	500	32° to 122°	Subfractional	0.52	5"	5"	7"	6" Lg. of 3/16" ID Tygon Tubing with Tygon 2375 Lining (Shore A60), 6" Lg. of 1/4" ID Tygon Tubing with Tygon 2375 Lining (Shore A60)	000000000	000000
45.6 (3/16") 76.00 (1/4")	15	200	32° to 122°	Subfractional	0.65	5"	5"	7"	6" Lg. of 3/16" ID Tygon Tubing with Tygon 2375 Lining (Shore A60), 6" Lg. of 1/4" ID Tygon Tubing with Tygon 2375 Lining (Shore A60)	000000000	000000
228.00 (3/16") 380.00 (1/4")	15	50	32° to 122°	Subfractional	1.74	5"	5"	7"	6" Lg. of 3/16" ID Tygon Tubing with Tygon 2375 Lining (Shore A60), 6" Lg. of 1/4" ID Tygon Tubing with Tygon 2375 Lining (Shore A60)	000000000	000000
PVDF Plastic and Viton® Fluoroelastomer Rubber Wetted Parts Material
0.02 (1/32") 0.07 (1/16") 0.25 (1/8")	30	800	32° to 122°	Subfractional	0.03	5 1/2"	3 1/4"	3 3/4"	4 1/2" Lg. of 1/32" ID Viton® Fluoroelastomer Tubing (Shore A60), 4 1/2" Lg. of 1/16" ID Viton® Fluoroelastomer Tubing (Shore A60), 4 1/2" Lg. of 1/8" ID Viton® Fluoroelastomer Tubing (Shore A60)	000000000	000000
0.11 (1/32") 0.34 (1/16") 1.25 (1/8")	30	800	32° to 122°	Subfractional	0.03	5 1/2"	3 1/4"	3 3/4"	4 1/2" Lg. of 1/32" ID Viton® Fluoroelastomer Tubing (Shore A60), 4 1/2" Lg. of 1/16" ID Viton® Fluoroelastomer Tubing (Shore A60), 4 1/2" Lg. of 1/8" ID Viton® Fluoroelastomer Tubing (Shore A60)	000000000	000000
0.87 (1/16") 3.53 (1/8") 6.84 (3/16")	30	800	32° to 122°	Subfractional	0.03	5 1/2"	3 1/4"	3 3/4"	6" Lg. of 1/16" ID Viton® Fluoroelastomer Tubing (Shore A60), 6" Lg. of 1/8" ID Viton® Fluoroelastomer Tubing (Shore A60), 6" Lg. of 3/16" ID Viton® Fluoroelastomer Tubing (Shore A60)	000000000	000000
1.75 (1/16") 7.07 1/8") 13.68 (3/16")	30	800	32° to 122°	Subfractional	0.03	5 1/2"	3 1/4"	3 3/4"	6" Lg. of 1/16" ID Viton® Fluoroelastomer Tubing (Shore A60), 6" Lg. of 1/8" ID Viton® Fluoroelastomer Tubing (Shore A60), 6" Lg. of 3/16" ID Viton® Fluoroelastomer Tubing (Shore A60)	000000000	000000
22.80 (3/16") 38.00 (1/4")	15	500	32° to 122°	Subfractional	0.52	5"	5"	7"	6" Lg. of 3/16" ID Viton® Fluoroelastomer Tubing (Shore A60), 6" Lg. of 1/4" ID Viton® Fluoroelastomer Tubing (Shore A60)	000000000	000000
45.6 (3/16") 76.00 (1/4")	15	200	32° to 122°	Subfractional	0.65	5"	5"	7"	6" Lg. of 3/16" ID Viton® Fluoroelastomer Tubing (Shore A60), 6" Lg. of 1/4" ID Viton® Fluoroelastomer Tubing (Shore A60)	000000000	000000
228.00 (3/16") 380.00 (1/4")	15	50	32° to 122°	Subfractional	1.74	5"	5"	7"	6" Lg. of 3/16" ID Viton® Fluoroelastomer Tubing (Shore A60), 6" Lg. of 1/4" ID Viton® Fluoroelastomer Tubing (Shore A60)	000000000	000000

Replacement Pump Heads

For Maximum Viscosity, cP		Each
300	000000000	000000
500	000000000	00000
1,000	000000000	00000

Replacement Tubing

For Polypropylene Plastic and Tygon Wetted Parts Material
For Flow Rate, gal./day		Each
0.06-0.34	000000000	000000
0.24-1.25	000000000	00000
0.87-1.75	000000000	00000
3.53-7.07	000000000	00000
6.84-13.68	000000000	00000
22.8-228	000000000	00000
38-380	000000000	00000
For PVDF Plastic and Viton® Fluoroelastomer Wetted Parts Material
0.02-0.11	000000000	00000
0.06-0.34	000000000	00000
0.24-1.25	000000000	00000
0.87-1.75	000000000	00000
3.53-7.07	000000000	00000
6.84-13.68	000000000	00000
22.8-228	000000000	00000
38-380	000000000	00000

Submersible Pumps for Water

Submerge these pumps to circulate water in small tanks, cooling baths, fountains, and other low-flow applications. Plug in to activate. Do not run dry. Not for use with salt water or flammable liquids.

Style B

		Max. Flow Rate, gpm								Discharge				Overall
	Electrical Connection Type	@ 1 Ft. of Head	@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Cord Length, ft.	Ht.	Wd.	Dp.		Each
115V AC, Single Phase—With Thermal Overload Protection
B	Plug	5.6	4.3	0.8	11.1	35° to 85°	1/15 hp	0.8	Screened	1/4	NPT	Male	6	4"	3 7/8"	5 3/8"	0000000	000000
B	Plug	8.9	6.9	2.5	13	35° to 85°	1/10 hp	1.2	Screened	1/2	NPT	Male	6	4 1/2"	4"	5 5/8"	0000000	000000
115V AC, Single Phase—Without Thermal Overload Protection
B	Plug	3.5	1.5	__	7.1	35° to 85°	1/25 hp	0.5	Screened	1/4	NPT	Male	6	3 7/8"	3 1/2"	4 5/8"	0000000	00000

Style E

		Max. Flow Rate, gpm								Discharge				Overall
	Electrical Connection Type	@ 1 Ft. of Head	@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Cord Length, ft.	Ht.	Wd.	Dp.		Each
115V AC, Single Phase—With Thermal Overload Protection
E	Plug	20	12	4	15	35° to 85°	1/15 hp	1	Screened	3/4	NPT	Male	15	5 1/4"	3 3/4"	6 3/8"	00000000	0000000

Oil-Free Electric Vacuum Pumps

Since these pumps don't require lubrication, there’s no risk of oil contamination. Maximum flow rate is the rate at which air is pumped before a vacuum is created. Flow rate steadily decreases as the pump generates the vacuum. The larger the tank, the longer it will take to form a vacuum.

Style C pumps withstand harsh operating conditions. Use to service machinery and refrigeration and circulation systems.

115V AC, Single Phase—With Thermal Overload Protection

							Intake			Discharge			O'all
Style	Max. Vacuum, in. of Hg	Max. Flow Rate, cfm	Temp. Range, °F	Volume, dBA	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Lg.	Wd.	Ht.		Each
NEMA 5-15 Plug
C	27.5	1.75	35° to 100°	70	1/6 hp	3.5	1/4	NPT	Female	1/4	NPT	Female	11 1/2"	5 5/8"	8 5/8"	000000	0000000

115V AC/230V AC, Single Phase—With Thermal Overload Protection

							Intake			Discharge			O'all
Style	Max. Vacuum, in. of Hg	Max. Flow Rate, cfm	Temp. Range, °F	Volume, dBA	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Lg.	Wd.	Ht.		Each
NEMA 5-15 Plug
C	27.5	5	35° to 100°	75	1/2 hp	6/12	1/4	NPT	Female	1/4	NPT	Female	13 1/4"	12 3/8"	9"	000000	000000000
Hardwire
C	27.5	10.5	35° to 100°	75	1 1/2 hp	10/21	1/4	NPT	Female	1/4	NPT	Female	21"	12 1/4"	8 1/2"	000000	00000000

Electric Vacuum Pumps


	NEMA 5-15
	NEMA 6-15

Use these pumps in applications such as degassing and servicing refrigeration and freezer systems. Maximum flow rate is the rate at which air is pumped before a vacuum is created. Flow rate steadily decreases as the pump generates the vacuum. The larger the tank, the longer it will take to form a vacuum. Tube and fitting ID will also affect flow.

						Intake			Discharge			Overall
Max. Vacuum	Max. Flow Rate, cfm	Temp. Range, °F	Volume, dBA	Horsepower	Current, A	Port Size	Tube Connection Type	Gender	Pipe Size	Thread Type	Gender	Lg.	Wd.	Ht.	Oil Capacity, oz.		Each
115V AC, Single Phase—With Thermal Overload Protection
NEMA 5-15 Plug
10 ^-2 torr @ 72° F	3	30° to 180°	70	1/2 hp	7	1/4", 3/8", 1/2"	Flared	Male	1/2	NPT	Male	14 1/2"	5 5/8"	12"	27	0000000	0000000
10 ^-2 torr @ 72° F	5	30° to 180°	70	1/2 hp	7	1/4", 3/8", 1/2"	Flared	Male	1/2	NPT	Male	14 1/2"	5 5/8"	12"	21	0000000	000000
10 ^-2 torr @ 72° F	7	30° to 180°	70	1/2 hp	7	1/4", 3/8", 1/2"	Flared	Male	1/2	NPT	Male	14 1/2"	5 5/8"	12"	23	0000000	000000
10 ^-2 torr @ 72° F	10	30° to 180°	70	1/2 hp	7	1/4", 3/8", 1/2"	Flared	Male	1/2	NPT	Male	14 1/2"	5 5/8"	12"	26	0000000	000000
115V AC/230V AC, Single Phase—With Thermal Overload Protection
NEMA 6-15 Plug
10 ^-2 torr @ 72° F	3	30° to 180°	70	1/2 hp	3.5/7	1/4", 3/8", 1/2"	Flared	Male	1/2	NPT	Male	14 1/2"	5 5/8"	12"	27	0000000	000000
10 ^-2 torr @ 72° F	5	30° to 180°	70	1/2 hp	3.5/7	1/4", 3/8", 1/2"	Flared	Male	1/2	NPT	Male	14 1/2"	5 5/8"	12"	21	0000000	000000
10 ^-2 torr @ 72° F	7	30° to 180°	70	1/2 hp	3.5/7	1/4", 3/8", 1/2"	Flared	Male	1/2	NPT	Male	14 1/2"	5 5/8"	12"	21	0000000	000000
10 ^-2 torr @ 72° F	10	30° to 180°	70	1/2 hp	3.5/7	1/4", 3/8", 1/2"	Flared	Male	1/2	NPT	Male	16"	5 5/8"	12"	26	0000000	000000

Electric High-Vacuum Pumps

Quick Clamp Intake Connection

Achieve powerful vacuum and continuous flow for applications such as vacuum drying, solvent evaporation, and distillation. Maximum flow rate is the rate at which air is pumped before a vacuum is created. Flow rate steadily decreases as the pump generates the vacuum. The larger the tank, the longer it will take to form a vacuum. Tube and fitting ID will also affect flow.

						Intake			Overall
Max. Vacuum	Max. Flow Rate, cfm	Temp. Range, °F	Volume, dBA	Horsepower	Current, A	Connection Style	Gender	Discharge Connection Style	Lg.	Wd.	Ht.	Oil Capacity, qt.		Each
115V AC, Single Phase—With Thermal Overload Protection
NEMA 5-15 Plug
10 ^-3 torr @ 72° F	2.8	50° to 100°	50	1/2 hp	5.3	Quick Clamp	Female	Quick Clamp Hose	18 1/4"	6 1/8"	9 1/8"	1.22	0000000	000000000
10 ^-3 torr @ 72° F	12.8	50° to 100°	55	1 hp	8	Quick Clamp	Female	Quick Clamp Hose	22 3/8"	8 1/8"	11 3/8"	2.55	0000000	00000000

Pumps for Supplied-Air Respirators

Open Dripproof Motor

Connect these oil-free portable pumps to your respirators for a continuous supply of low-pressure breathable air.

	For No. Of
Flow Rate	Hood Respirators	Helmet Respirators	Full-Face Respirators	Max. Supply Pressure, psi	Max. Span, ft.	Connection Type	Quick-Disconnect Shape	Coupling Size	Motor Type	Motor Power, hp	Voltage	Current, A	Plug Type		Each
10 cfm @ 5 psi	1	1	2	15	300	Quick-Disconnect Hose Coupling	Industrial	1/2	Open Dripproof	3/4	115V AC	10.8	Three Prong	00000000	000000000

Replacement Outlet Filter	00000000	Each	000000
Replacement Inlet Filter	00000000	Each	00000

Supplied-Air Hood Respirators for Air Pumps

When connected to an air pump, respirators provide a continuous supply of clean air. They have a chemical-resistant Tychem 2000 (formerly known as Tyvek QC) hood that protects against light liquid splashes. Tuck the hood with outer bib and inner bib into your clothing for splash protection. The ratchet suspension hat adjusts with an easy-turn knob.

If you need a different material or style, select a respirator hood that’s compatible with your respirator. Respirator hoods do not require fit testing, and they leave enough room to fit a ponytail or beard without compromising your respiratory protection. Hoods are available in a variety of materials and protection factors.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

			Lens
For Use With	NIOSH Approval	Hat Size	Material	Ht.	Wd.	Required Flow Rate, cfm	Flow Rate	Hose Lg., ft.	Motor Type	Power Source	Motor Power, hp	Voltage	Plug Type	Cord Lg., ft.		Each
Solid Particles, Organic Vapors, Acid Gases, Ammonia, Formaldehyde, Methylamine	TC-19C-0154	6 1/2-8	Acetate Plastic	6"	16"	6-15	10 cfm @ 5 psi	50	Open Dripproof	Electric	3/4	115V AC	Three Prong	8	0000000	000000000

Replacement Adhesive-Lens Covers (Pkg. of 5)	00000000	Pkg.
50-ft. Extension Hose	0000000	Each
100-ft. Extension Hose	0000000	Each

Supplied-Air Full-Face Respirators for Air Pumps

The portable pump on these respirators provides a continuous supply of clean air for one person.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

				Lens
For Use With	NIOSH Approval	Size	Mask Material	Material	Ht.	Wd.	Flow Rate	Hose Lg., ft.	Max. Span, ft.	Motor Type	Power Source	Motor Power	Voltage	Plug Type	Cord Lg., ft.		Each
Solid Particles, Organic Vapors, Acid Gases, Ammonia, Formaldehyde, Methylamine	TC-19C-0322	M/L	Silicone Rubber	Polycarbonate Plastic	10"	7"	10 cfm @ 5 psi	50	300	Open Dripproof	Electric	3/4 hp	115V AC	Three Prong	8	0000000	000000000

Replacement Lens	00000000	Each	0000000
Optional 100-ft. Extension Hose	0000000	Each	000000
Optional 50-ft. Extension Hose	0000000	Each	000000
Replacement Adhesive-Backed Lens Covers (Pkg. of 5)	00000000	Pkg.	00000