We will reply to your message within an hour.
Close and open these grab latches with a push—there's no need for a handle.
A catch grabs and holds the strike plate to keep doors shut.
Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.
An electrical switch allows these latches to power a light or other signal to indicate whether a door is open or closed.
Turn the screw on the latch to adjust the gripping force on the strike plate.
Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.
Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.
These latches are adjustable; push the ball in and rotate it to adjust force as well as compensate for misalignment.
Close and open these roller latches with a push—there's no need for a handle.
Doors stay closed with the pressure of rollers against the strike plate.
These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.
To prevent doors from slamming, these latches are hydraulic.
There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.
Close and open these magnetic latches with a push—there's no need for a handle.
Magnetic force holds doors closed.
To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.
These latches withstand temperatures up to 480° or 570° F.
Made to NSF/ANSI standards, these latches have a completely sealed magnet to eliminate crevices that can trap food particles.
These latches snap together to secure doors. They have a return spring to snap tight with a push and release with a pull.
Push in the knob to open these latches.
When not in use, push the knob in so it's flush and out of the way; it pops out with a touch.
Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.
For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.
Keep doors on refrigerators and industrial enclosures closed.
Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.
When released, the spring-loaded ring handle returns to its recessed position to stay out of the way.
To open, push in the knob and pull the tab.
Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers.
An emergency release handle offers a means of escape if the door closes with someone inside an enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.
Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.
Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.
Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.
Operate these padlockable latches from either side of the door—there is a handle on both sides.
An emergency release handle offers a means of escape if a door closes with someone inside an enclosure.
Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.
The low profile means less of the lock is exposed, reducing the potential for damage.
Press the button and the handle snaps open; push the handle shut for a secure hold.
These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
Latches snap shut when you push the bar in the strike plate to prevent accidental unlatching. Press the button on the strike plate to release the bar.
In addition to sliding gates, these locks are for use on cantilever and fixed-roller gates.
With a key-locking mechanism, these locks provide more security than other gate locks.
A hidden push-button release on the bottom of these latches retracts the latch bolt; this discourages unwanted entry but allows access to those who know it’s there.
For use alone or as part of an access-control system, these locks use magnets to hold gates closed.
Push to close and pull up on the latch arm to open these padlockable latches.
A slight push or pull on the lever opens your door.
These locks use electromagnetic force to hold double doors closed, often as part of an access-control system.
For use alone or as part of an access-control system, these locks use electromagnetic force to hold single doors closed.