Pull off a small piece of putty and stick lightweight objects to a surface.

This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.

These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

Stop leaks in metal tanks and equipment without draining the contents.

Seal leaks around small holes.

Stop leaks in metal tanks and equipment without draining the contents. Until a permanent repair can be made, rub these sticks into the leak to form a temporary seal.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.

Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

Able to withstand temperatures up to 2300° F, these ceramic surface fillers are often used as thermal insulation on brick, mortar, burner blocks, furnace holders, and thermocouples.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.

Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

For use when thickness will be more than 2", concrete mixes consist of cement, sand, and gravel.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

Slide these tools along the perimeter of poured concrete slabs to create a rounded edge for a finished appearance that resists chipping.

Also known as mortar hoes, the blade on these tools has holes to allow concrete to pass through as you mix.

Once concrete begins to set up and surface water reabsorbs, finish with a trowel to compact the top layer for a smooth, hard surface.

Push and pull freshly-poured concrete.

Create grooves in poured concrete slabs to control cracking caused by drying, settling, and freezing.

Spread and level asphalt.

Spread, scrape, and shape mortar.

Keep drywall compound close at hand so you can apply it over seams quickly and efficiently.

These knives have a sturdy blade for scraping paint and debris and for applying and smoothing joint and spackling compounds.

Use these mashers to mix drywall compound in large containers.

Smooth joint compound on both sides of an interior corner with these trowels.

These patching compounds are the most flexible and watertight we offer.

Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls.

Reinforce hot- and cold-applied asphalt patching compounds and coatings with this flexible fabric.

Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.

Also known as Plaster of Paris, these fillers conceal small cracks, nail holes, and blemishes. Mix with water.

Tape hides seams and smooths out corners. It has an adhesive back for bonding and requires joint compound for finishing. It can also be used to repair damaged walls.

Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.

Spray these compounds onto drywall to create an orange-peel texture that covers stains, patches, and chips. The nozzle adjusts from a light to heavy spray.

Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.

Cut rope to the length you need, pack it in cracks up to 1" wide, and heat with a propane torch.

Roll the seams where wall coverings meet for an even, continuous appearance.

Fix damaged wood or build up and replace missing wood.

Make flexible, waterproof repairs to rips and tears in canvas, leather, and acrylic fabric.

Press this adhesive-backed plastic tape into place for an immediate light-duty seal.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Resistant to mold and mildew, these sealants are well suited to high-humidity environments.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

Also known as neutral cure, this sealant won't discolor copper, brass, plastic, and concrete.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.

Press this pliable rope into place to hold glass in window frames and seal leaks.

Seal glass windows in metal and wood fire-rated doors.

Designed for use on ovens and kilns, these sealants form a durable, rock-hard seal after firing.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.