These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Patch concrete floors and stairs with these compounds.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.

Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Designed for use on ovens and kilns, these sealants form a durable, rock-hard seal after firing.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Seal joints and gaps in concrete.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.