These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.

Repair small leaks and cracks in coolant tanks for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems.

Use these two-part fillers to rebuild cracked or worn plastic surfaces.

Even when used under water, these adhesives maintain their strength.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Press this adhesive-backed plastic tape into place for an immediate light-duty seal.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Tested to meet ASTM E595, a standard used by NASA, these sealants fill joints and seams while releasing almost no volatile emissions that could damage sensitive electronics, even in a vacuum.

This sealant includes a material certificate with traceable lot number, test report, and product shelf life.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These sealants don't degrade in sunlight.