Filter by
For Use On
For Joining
Maximum Temperature
Performance
Consistency
Manufacturer Model Number
Begins to Harden
For Use With
Manufacturer Model Name
Clarity
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Waterproof Epoxy Structural Adhesives
 |  |
Pail | Stick |
Even when used underwater, these adhesives maintain their strength. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
These epoxies come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Putty—Slice off a chunk and mold it into the shape you need.
Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Type | Begins to Harden, min. | Reaches Full Strength | Shear, psi | Peel | Mix Ratio | Consistency | Viscosity | Temp. Range, ° F | For Joining | Each | |||
J-B Weld | ||||||||||||||
WaterWeld | ||||||||||||||
| 8277 | Stick | 25 | 60 min. | 900 | Not Rated | — | Putty | Not Rated | — | Composite, Metal, Plastic, Rubber | 7605A16 | 00000 | ||
Devcon | ||||||||||||||
| 11801 | Pail | 45 | 24 hr. | 2,600 | — | 1:1 | Putty | Not Rated | 40 to 250 | Composite, Metal, Plastic | 7605A211 | 000000 | ||
Water-Resistant Surface Fillers
 |  |  |
Epoxy Jar | Epoxy Can | Epoxy Stick |
Container | Temp. Range | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Net Wt., oz. | Type | Lg. | Begins to Harden, min. | Reaches Full Strength | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | Dia. | For Use Outdoors | Min. | Max., ° F | Color | Process After Hardening | For Use On | Each | |||
Loctite® Fixmaster Underwater Repair Epoxy | ||||||||||||||||||||||
| EA 9490 | — | 4 | Stick | 8" | 15 | 60 min. | Putty | Yes | — | 16 in² @ 1/4" | 1/4" | 1" | Yes | Not Rated | 300 | White | Machine, Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Concrete, Fiberglass, Wood | 7531A13 | 000000 | ||
Epoxy Surface Fillers | ||||||||||||||||||||||
| — | 12 | — | Jar | — | 30 | 24 hr. | Paste | Yes | 1:1 | 85 in² @ 1/4" | 1" | — | Yes | 50° F | 210 | White | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood | 7521A14 | 00000 | ||
| — | 24 | — | Can | — | 30 | 24 hr. | Paste | Yes | 1:1 | 170 in² @ 1/4" | 1" | — | Yes | 50° F | 210 | White | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood | 7521A12 | 00000 | ||
| — | 48 | — | Can | — | 30 | 24 hr. | Paste | Yes | 1:1 | 340 in² @ 1/4" | 1" | — | Yes | 50° F | 210 | White | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood | 7521A13 | 00000 | ||
Surface Fillers
 |  |
Epoxy Mixer Cup | Epoxy Syringe |
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | Temp. Range, ° F | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Net Wt., oz. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Pkg. Qty. | Pkg. | |||
Loctite® Fixmaster Epoxy | |||||||||||||||||||||
| EA 445 | — | 0.12 | Mixer Cup | 5 | 12 hr. | Thick Liquid | Yes | 1:1 | 1 in² @ 1/4" | 1/4" | Yes | -65 | 180 | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood | 10 | 7512A15 | 000000 | ||
| EA 445 | — | 1 | Mixer Cup | 5 | 12 hr. | Thick Liquid | Yes | 1:1 | 1 in² @ 1/4" | 1/4" | Yes | -65 | 180 | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood | 10 | 7512A16 | 000000 | ||
| EA 9131 | — | 0.12 | Mixer Cup | 90 | 24 hr. | Thick Liquid | Yes | 1.5:1 | 1 in² @ 1/4" | 1/4" | Yes | -65 | 180 | White | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood | 10 | 7512A14 | 00000 | ||
Loctite® Fixmaster Poxy Pak™ | |||||||||||||||||||||
| EA 9017 | 0.8 | — | Syringe | 5 | 60 min. | Thick Liquid | Yes | 1:1 | Not Rated | 1/4" | Yes | -65 | 300 | Clear | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Concrete, Glass, Wood | 1 | 7556A33 | 00000 | ||
Surface Fillers for Plastic
|  |
Epoxy Stick | Cartridge |
Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.
Cartridge—Surface fillers in a cartridge come with a mixer nozzle, but require a gun (sold separately) for dispensing. For best results, use a primer (sold separately).
Stick—Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. Use with most rigid and semi-rigid types of plastic. They meet NSF/ANSI 61 for use with drinking water.
Container | Temp. Range, ° F | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Net Wt., oz. | Type | Lg. | Begins to Harden | Reaches Full Strength | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | Dia. | For Use Outdoors | Min. | Max. | Color | Food Industry Std. | Process After Hardening | For Use On | Each | |||
Epoxy Surface Fillers | ||||||||||||||||||||||
| — | 4 | Stick | 8" | 20 min. | 24 hr. | Putty | Yes | — | 16 in² @ 1/4" | 1/2" | 1" | Yes | -40 | 250 | Off-White | NSF/ANSI 61 | Drill, Sand, Saw | ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF | 6617A21 | 000000 | ||
| 1.7 | — | Cartridge | — | 5 min. | 30 min. | Thick Liquid | Yes | 1:1 | 11 in² @ 1/4" | Not Rated | — | No | -20 | 180 | Gray | — | Sand | ABS, CPVC, PETG, Polycarbonate, Polyethylene, Polypropylene, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF | 6488T62 | 00000 | ||
Urethane Rubber Surface Fillers | ||||||||||||||||||||||
| 1.7 | — | Cartridge | — | 20 sec. | 60 min. | Thick Liquid | Yes | 1:1 | 11 in² @ 1/4" | Not Rated | — | No | -20 | 180 | Amber | — | Sand | ABS, CPVC, PETG, Polycarbonate, Polyethylene, Polypropylene, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF | 6488T63 | 00000 | ||
| 1.7 | — | Cartridge | — | 50 sec. | 60 min. | Thick Liquid | Yes | 1:1 | 11 in² @ 1/4" | Not Rated | — | No | -20 | 180 | Black | — | Sand | ABS, CPVC, PETG, Polycarbonate, Polyethylene, Polypropylene, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF | 6488T61 | 00000 | ||
Caulking Tape
 |
Press this adhesive-backed plastic tape into place for an immediate light-duty seal. It has a score line for easy installation in a corner.
Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Type | Wd. | Lg., ft. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength | Hardness Rating | Min. | Max. | For Joining | Color (Clarity) | Each | |||
PET with Butyl Adhesive | |||||||||||||||
1/4" Thick | |||||||||||||||
| Strip | 7/8" | 11 | 12 | Not Rated | Not Rated | Not Rated | Not Rated | 55 | 80 | Composite Glass Masonry Metal Plastic Rubber Wood | White (Opaque) | 7582T25 | 00000 | ||
Light-Activated Surface Fillers
 |  |
Epoxy Bottle | Polyester Plastic, Tube |
Container | Temp. Range, ° F | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, min. | Consistency | Mixing Req. | For Max. Crack Wd. | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||
Epoxy Surface Fillers | ||||||||||||||||||
| 3.5 | Bottle | 1 | 5 | Putty | No | 1" | 24 in² @ 1/4" | 1/2" | Yes | -40 | 270 | Amber | Drill, Sand, Tap | Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood | 73475A14 | 000000 | ||
Polyester Plastic Surface Fillers | ||||||||||||||||||
| 3.5 | Tube | 1 | 3 | Putty | No | 1" | 24 in² @ 1/4" | 1/2" | Yes | -40 | 220 | White | Drill, Sand, Tap | Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood | 73475A12 | 00000 | ||
Non-Hardening Caulk
Butyl Mastic Strip
 |
Butyl mastic has a clay-like consistency.
Brown | Gray | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Lg., ft. | Tensile Strength | Hardness Rating | Temp. Range, ° F | For Joining | No. of Pieces | Each | Each | |||
| 1/8" | 30 | Not Rated | Not Rated | -30 to 150 | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | 8 | ——— | 0 | 9408T146 | 00000 | |
| 1/8" | 45 | Not Rated | Not Rated | -30 to 150 | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | 8 | 9408T144 | 00000 | 9408T17 | 0000 | |
| 1/8" | 90 | Not Rated | Not Rated | -30 to 150 | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | 8 | 9408T145 | 0000 | 9408T14 | 0000 | |
Surface Filler Patches
 |
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Temp. Range, ° F | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Type | Lg. | Wd. | Begins to Harden, min. | Reaches Full Strength | Mixing Req. | Mix Ratio | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||
Devcon Zip Patch™ | |||||||||||||||||
| 11500 | Patch | 4" | 9" | 5 | 4 hr. | No | — | Yes | -40 | 200 | Brown | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Fiberglass, Wood | 7790A21 | 0000000 | ||
Epoxy Surface Fillers | |||||||||||||||||
| — | Patch | 4" | 6" | 1 | 30 min. | Yes | 1:1 | Yes | — | 425 | Clear | Sand | Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, SBR, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood | 74645A79 | 00000 | ||
Coolant-Resistant Surface Fillers
 |
Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.
Container | Temp. Range | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, min. | Consistency | Mixing Req. | Min. | Max., ° F | Color | Specs. Met | For Use On | Each | |||
Surface Fillers | ||||||||||||||
| 16 | Jug | 7 | 10 | Thick Liquid | No | Not Rated | 500 | Brown | ASTM D3147 | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, PTFE, Polyethylene, Polypropylene, Polyimide, Polystyrene, PVC, PVDF | 2445N11 | 000000 | ||
Structural Sealants
 |  |
Cartridge | Sausage Pack |
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Choose a Color (Clarity) | Each | |||
3M Polymer | ||||||||||||||||
| 760 UV | 9.8 | Cartridge | 30 | 24 | 100% | Not Rated | 260 | Medium Hard (Durometer 55A) | -40 | 212 | Composite Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | Black (Opaque), Gray (Opaque), White (Opaque) | 6937T352 | 000000 | ||
| 760 UV | 20.3 | Sausage Pack | 30 | 24 | 100% | Not Rated | 260 | Medium Hard (Durometer 55A) | -40 | 212 | Composite Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | Black (Opaque), White (Opaque) | 6937T192 | 00000 | ||
3M Polyurethane Rubber | ||||||||||||||||
| 540 | 20.3 | Sausage Pack | 90 | 24 | 600% | -25% to 25% | 300 | Medium Soft (Durometer 40A) | -40 | 190 | Composite Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | Black (Opaque) | 6937T667 | 00000 | ||
| 540 | 20.3 | Sausage Pack | 90 | 24 | 600% | -25% to 25% | 300 | Medium Soft (Durometer 40A) | -40 | 190 | Composite Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | Gray (Opaque) | 6937T678 | 00000 | ||
| 540 | 20.3 | Sausage Pack | 90 | 24 | 600% | -25% to 25% | 300 | Medium Soft (Durometer 40A) | -40 | 190 | Composite Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | White (Opaque) | 6937T649 | 00000 | ||
| 540 | 20.3 | Sausage Pack | 90 | 24 | 600% | -25% to 25% | 300 | Medium Soft (Durometer 40A) | -40 | 190 | Composite Metal Plastic Rubber Wood | — | 6937T635 | 00000 | ||
| 551 | 20.3 | Sausage Pack | 180 | 24 | 600% | Not Rated | 450 | Medium (Durometer 45A) | -40 | 190 | Composite Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | White (Opaque) | 6937T948 | 00000 | ||
| 560 | 20.3 | Sausage Pack | 60 | 24 | 300% | Not Rated | 580 | Medium Hard (Durometer 55A) | -40 | 190 | Composite Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | Black (Opaque), Gray (Opaque), White (Opaque) | 6937T769 | 00000 | ||
Silicone Rubber Sealants
Momentive Silicone Rubber
|  |
Cartridge | Tube |
Mfr. Model No. | Begins to Harden, min. | Elongation | Joint Compression/Expansion Tolerance | Hardness Rating | Temp. Range, ° F | For Joining | Food Industry Std. | Mil. Spec. | Color (Clarity) | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2.8 fl. oz. Tube | |||||||||||||
24 hr. Reaches Full Strength | |||||||||||||
| RTV102 | 15 | 450% | Not Rated | Soft (Durometer 30A) | -75 to 400 | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type I MIL-A-46106 Group III Type I | White (Opaque) | 7545A451 | 000000 | ||
| RTV103 | 15 | 450% | Not Rated | Soft (Durometer 30A) | -75 to 400 | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type I MIL-A-46106 Group III Type I | Black (Opaque) | 7545A461 | 00000 | ||
| RTV106 | 15 | 400% | -25% to 25% | Soft (Durometer 30A) | -55 to 400 | Glass Masonry Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group III Type I | Red (Opaque) | 74975A53 | 00000 | ||
| RTV108 | 15 | 450% | Not Rated | Soft (Durometer 30A) | -75 to 400 | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type I MIL-A-46106 Group III Type I | White (Semi-Clear) | 7545A471 | 00000 | ||
5.4 fl. oz. Cartridge | |||||||||||||
24 hr. Reaches Full Strength | |||||||||||||
| RTV106 | 15 | 400% | -25% to 25% | Soft (Durometer 30A) | -55 to 400 | Glass Masonry Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group III Type I | Red (Opaque) | 7545A302 | 000000 | ||
10.1 fl. oz. Cartridge | |||||||||||||
12 hr. Reaches Full Strength | |||||||||||||
| RTV5818 | 15 | 500% | -25% to 25% | Soft (Durometer 23A) | -60 to 400 | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | — | — | Clear (Semi-Clear) | 7545A611 | 00000 | ||
24 hr. Reaches Full Strength | |||||||||||||
| RTV102 | 15 | 450% | Not Rated | Soft (Durometer 30A) | -75 to 400 | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type I MIL-A-46106 Group III Type I | White (Opaque) | 7545A452 | 00000 | ||
| RTV103 | 15 | 450% | Not Rated | Soft (Durometer 30A) | -75 to 400 | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type I MIL-A-46106 Group III Type I | Black (Opaque) | 7545A462 | 00000 | ||
| RTV106 | 15 | 400% | -25% to 25% | Soft (Durometer 30A) | -55 to 400 | Glass Masonry Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group III Type I | Red (Opaque) | 74975A56 | 00000 | ||
| RTV108 | 15 | 450% | Not Rated | Soft (Durometer 30A) | -75 to 400 | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type I MIL-A-46106 Group III Type I | White (Semi-Clear) | 7545A472 | 00000 | ||
| RTV109 | 15 | 450% | Not Rated | Soft (Durometer 30A) | -75 to 400 | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type I MIL-A-46106 Group III Type I | Aluminum (Opaque) | 7545A482 | 00000 | ||
Self-Leveling Oil- and Fuel-Resistant Sealants
|
Tube |
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint expansion/compression tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint expansion/compression tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | Temp., ° F | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Color (Clarity) | Each | |||
Plastic | |||||||||||||||
| 2 | Tube | 3 | 3 | 25% | -2% to 2% | 7,250 | Extra Hard (Durometer 90A) | -40 | 150 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood | Clear (Clear) | 1532N31 | 00000 | ||
Noncorrosive Silicone Rubber Sealants
| |
Cartridge | Tube |
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone rubber, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Cannot Be Sold to California—Sealants that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Container | Temp., ° F | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Primer Req. for Use On | Cannot Be Sold To | Choose a Color (Clarity) | Each | |||
Dow Silicone Rubber | ||||||||||||||||||
| 737 | 3 | Tube | 5 | 24 | 300% | -25% to 25% | 175 | Soft (Durometer 30A) | -85 | 350 | Composite Glass Metal Plastic Rubber Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | Polystyrene Polyurethane Rubber PVC | — | Clear (Clear) | 7587A25 | 000000 | ||
| 737 | 10.1 | Cartridge | 3 | 24 | 300% | -25% to 25% | 175 | Soft (Durometer 30A) | -85 | 350 | Composite Glass Metal Plastic Rubber Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | Polystyrene Polyurethane Rubber PVC | — | Black (Opaque), Clear (Clear), White (Opaque) | 7587A1 | 00000 | ||
| 739 | 10.1 | Cartridge | 5 | 24 | 640% | -25% to 25% | 225 | Soft (Durometer 35A) | -65 | 300 | Glass Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | Polycarbonate | — | Black (Opaque), White (Opaque) | 76045A1 | 00000 | ||
Loctite® Silicone Rubber | ||||||||||||||||||
| SI 5011 CL | 2.7 | Tube | 20 | 24 | 300% | Not Rated | 170 | Soft (Durometer 20A) | -75 | 400 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | — | — | Clear (Clear) | 7770A27 | 00000 | ||
| SI 5011 CL | 10.1 | Cartridge | 20 | 24 | 300% | Not Rated | 170 | Soft (Durometer 20A) | -75 | 400 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | — | — | Clear (Clear) | 7770A28 | 00000 | ||
| SI 5109 | 10.1 | Cartridge | 60 | 24 | 300% | Not Rated | 215 | Soft (Durometer 15A) | -75 | 600 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | — | — | Red (Opaque) | 7770A26 | 00000 | ||
Momentive Silicone Rubber | ||||||||||||||||||
| RTV6708 | 10.1 | Cartridge | 25 | 24 | 450% | Not Rated | 225 | Soft (Durometer 15A) | -75 | 400 | Glass Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | — | California | White (Semi-Clear) | 7547A583 | 00000 | ||
Permatex Silicone Rubber | ||||||||||||||||||
| 81173 | 12.9 | Cartridge | 30 | 24 | 350% | Not Rated | 170 | Soft (Durometer 15A) | -75 | 450 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | — | California | Black (Semi-Clear) | 7479A34 | 00000 | ||
Structural Oil- and Fuel-Resistant Sealants
 | |
Cartridge | Tube |
Impervious to the swelling effects of oils, fuels, and solvents, use this high-strength silicone rubber sealant to assemble and repair fuel systems and tanks. Silicone rubber forms a tough, rubbery, UV-resistant seal that remains flexible over time. It's non-sagging, so it won't drip from vertical and overhead surfaces. Also known as RTV (room-temperature vulcanizing).
Elongation and joint expansion/compression tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. This sealant is best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Color (Clarity) | Each | |||
Dow Silicone Rubber | ||||||||||||||||
| 730 FS | 3 | Tube | 12 | 24 | 200% | Not Rated | 300 | Medium Soft (Durometer 40A) | -70 | 350 | Composite Masonry Metal Plastic Rubber | White (Opaque) | 1531N13 | 0000000 | ||
| 730 FS | 5.8 | Cartridge | 12 | 24 | 200% | Not Rated | 300 | Medium Soft (Durometer 40A) | -70 | 350 | Composite Masonry Metal Plastic Rubber | White (Opaque) | 1531N14 | 000000 | ||
Self-Leveling Silicone Rubber Sealants with Material Certification
|
These sealants include a material certificate with traceable lot number, test report, and product shelf life. Thinner than non-sagging sealants, these sealants flow easily into cracks and have a smooth finish. They’re also known as RTV (room-temperature vulcanizing).
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Tensile Strength, psi | Hardness Rating | Temp. Range, ° F | Food Industry Std. | Mil. Spec. | Certification | For Joining | Color | Each | |||
Momentive Silicone Rubber | |||||||||||||||||
| RTV118 | 2.8 | Tube | 20 | 24 | 325% | 325 | Soft (Durometer 25A) | -75 to 400 | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type II | Mil. Spec. UL Recognized Component | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | Clear | 6604A46 | 000000 | ||
Sealants
|
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | Temp., ° F | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Primer Req. for Use On | Choose a Color (Clarity) | Each | |||
Sika Sikaflex Polyurethane Rubber | |||||||||||||||||
| 221 | 10.1 | Cartridge | 60 | 3 day | 500% | -12.5% to 12.5% | 260 | Medium Soft (Durometer 40A) | -40 | 190 | Masonry Metal Plastic Rubber Metal to Plastic Metal to Rubber Plastic to Rubber | Aluminum Stainless Steel Steel | Aluminum (Opaque), Black (Opaque), White (Opaque) | 6937T2 | 000000 | ||
| 227 | 10.1 | Cartridge | 40 | 3 day | 600% | -12.5% to 12.5% | 245 | Medium Soft (Durometer 40A) | -40 | 190 | Metal Plastic Rubber Metal to Plastic Metal to Rubber | Aluminum Stainless Steel Steel | Aluminum (Opaque), Black (Opaque), White (Opaque) | 6937T5 | 00000 | ||
Polymer | |||||||||||||||||
| — | 9.5 | Cartridge | 20 | 24 hr. | 250% | -25% to 25% | 225 | Soft (Durometer 25A) | -75 | 250 | Composite Masonry Plastic Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | — | Clear (Clear) | 7322A31 | 00000 | ||
| — | 10.1 | Cartridge | 5 | 3 day | 500% | -25% to 25% | 400 | Medium (Durometer 50A) | -40 | 190 | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | — | Black (Opaque), Gray (Opaque), Limestone (Opaque), White (Opaque) | 7606A59 | 00000 | ||
| — | 10.1 | Cartridge | 60 | 3 day | 1,000% | -50% to 50% | 350 | Soft (Durometer 25A) | -40 | 200 | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | — | Black (Opaque), Gray (Opaque), Limestone (Opaque), Tan (Opaque), White (Opaque) | 7606A49 | 0000 | ||
Fuel-Resistant Surface Fillers
 |
Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.
1.5 pt. Container—1.5-pint container can treat a 10-gallon fuel tank.
3 pt. Container—3-pint container can treat a 20-gallon fuel tank.
Container | Temp. Range, ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, pt. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||
Epoxy Surface Fillers | ||||||||||||||||
| 1.5 | Can | 5 | 24 | Thick Liquid | Yes | 2:1 | No | 70 | 90 | Amber | Drill, Sand, Tap | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass | 2450N12 | 000000 | ||
| 3 | Can | 5 | 24 | Thick Liquid | Yes | 2:1 | No | 70 | 90 | Amber | Drill, Sand, Tap | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass | 2450N11 | 000000 | ||
Puncture-Resistant Sealants
| |
Cartridge | Sausage Pack |
Form seals that resist punctures, cuts, and abrasion to withstand heavy wear and tampering. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Primer Req. for Use On | Color (Clarity) | Each | |||
Polyurethane Rubber | ||||||||||||||||
| 10.1 | Cartridge | 90 | 48 | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20 | 120 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood | Grout Concrete Glass Plaster Stone | White (Opaque) | 1743N11 | 000000 | ||
| 20 | Sausage Pack | 90 | 48 | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20 | 120 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood | Grout Concrete Glass Plaster Stone | White (Opaque) | 1743N12 | 00000 | ||
High-Strength Concrete Joint Sealants
| |
Cartridge | Sausage Pack |
Seal concrete joints in high-traffic areas—these sealants stand up to heavy wear and tear, such as steel wheel traffic. They're non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone rubber, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | For Max. Crack | Each | Package | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, day | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Wd. | Dp. | Application Temp. Range, ° F | Temp. Range, ° F | For Joining | Color | Each | Pkg. Qty. | Pkg. | ||||
Silicone Rubber | ||||||||||||||||||||
| 20 | Sausage Pack | 60 | 7 | 1,000% | -50% to 100% | 20 | Medium Hard (Durometer 55A) | 1" | 1/2" | 60 to 85 | -20 to 300 | Composite Glass Masonry Metal Plastic Rubber Wood | Gray | 1598N3 | 000000 | 12 | 1598N031 | 0000000 | ||
| 29 | Cartridge | 60 | 7 | 1,000% | -50% to 100% | 20 | Medium Hard (Durometer 55A) | 1" | 1/2" | 60 to 85 | -20 to 300 | Composite Glass Masonry Metal Plastic Rubber Wood | Gray | 1598N4 | 00000 | 10 | 1598N041 | 000000 | ||
Self-Leveling Silicone Rubber Sealants
| |
Cartridge | Tube |
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish. Made from silicone rubber, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Container | Temp., ° F | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Primer Req. for Use On | Choose a Color (Clarity) | Each | |||
Dow Silicone Rubber | |||||||||||||||||
| 734 | 3 | Tube | 15 | 24 hr. | 315% | -25% to 25% | 215 | Soft (Durometer 27A) | -85 | 350 | Glass Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | ABS Aluminum Stainless Steel Steel Galvanized Steel | Clear (Clear), White (Opaque) | 75825A5 | 000000 | ||
| 734 | 10.1 | Cartridge | 15 | 24 hr. | 315% | -25% to 25% | 215 | Soft (Durometer 27A) | -85 | 350 | Glass Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | ABS Aluminum Stainless Steel Steel Galvanized Steel | Clear (Clear), White (Opaque) | 75825A6 | 00000 | ||
Momentive Silicone Rubber | |||||||||||||||||
| RTV116 | 10.1 | Cartridge | 30 | 3 day | 350% | -25% to 25% | 350 | Soft (Durometer 20A) | -75 | 500 | Glass Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | — | Red (Opaque) | 6604A11 | 000000 | ||
| RTV118 | 2.8 | Tube | 20 | 24 hr. | 325% | Not Rated | 325 | Soft (Durometer 25A) | -75 | 400 | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | — | Clear (Semi-Clear) | 6604A36 | 00000 | ||
Silicone Rubber Sealants with Material Certification
| |
Cartridge | Tube |
These sealants include a material certificate with traceable lot number, test report, and product shelf life. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone rubber, sealants are RTV (room-temperature vulcanizing).
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Elongation | Tensile Strength, psi | Hardness Rating | Temp. Range, ° F | Food Industry Std. | Mil. Spec. | Certification | For Joining | Color (Clarity) | Each | |||
Momentive Silicone Rubber | ||||||||||||||||
24 hr. Reaches Full Strength | ||||||||||||||||
| RTV102 | 2.8 | Tube | 15 | 450% | 400 | Soft (Durometer 30A) | -75 to 400 | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type I | Mil. Spec. UL Recognized Component | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | White (Opaque) | 7545A551 | 000000 | ||
| RTV102 | 10.1 | Cartridge | 15 | 450% | 400 | Soft (Durometer 30A) | -75 to 400 | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type I | Mil. Spec. UL Recognized Component | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | White (Opaque) | 7545A552 | 00000 | ||
| RTV103 | 2.8 | Tube | 15 | 450% | 400 | Soft (Durometer 30A) | -75 to 400 | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type I | Mil. Spec. UL Recognized Component | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | Black (Opaque) | 7545A561 | 00000 | ||
| RTV103 | 10.1 | Cartridge | 15 | 450% | 400 | Soft (Durometer 30A) | -75 to 400 | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type I | Mil. Spec. UL Recognized Component | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | Black (Opaque) | 7545A562 | 00000 | ||
| RTV106 | 2.8 | Tube | 15 | 400% | 375 | Soft (Durometer 30A) | -75 to 500 | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group III Type I | Mil. Spec. UL Recognized Component | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | Red (Opaque) | 74975A63 | 00000 | ||
| RTV106 | 10.1 | Cartridge | 15 | 400% | 375 | Soft (Durometer 30A) | -75 to 500 | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group III Type I | Mil. Spec. UL Recognized Component | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | Red (Opaque) | 74975A66 | 00000 | ||
| RTV108 | 2.8 | Tube | 15 | 450% | 400 | Soft (Durometer 30A) | -75 to 400 | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type I | Mil. Spec. UL Recognized Component | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | White (Semi-Clear) | 7545A581 | 00000 | ||
| RTV108 | 10.1 | Cartridge | 15 | 450% | 400 | Soft (Durometer 30A) | -75 to 400 | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type I | Mil. Spec. UL Recognized Component | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | White (Semi-Clear) | 7545A582 | 00000 | ||
| RTV109 | 10.1 | Cartridge | 15 | 450% | 400 | Soft (Durometer 30A) | -75 to 400 | FDA Compliant 21 CFR 177.2600 NSF/ANSI 51 | MIL-A-46106 Group I Type I | Mil. Spec. UL Recognized Component | Glass Masonry Metal Plastic Rubber Wood Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | Aluminum (Opaque) | 7545A592 | 00000 | ||
Caulk
Polymer
| |
Cartridge | Tube |
Each | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Begins to Harden, day | Reaches Full Strength, day | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength | Hardness Rating | Temp. Range, ° F | Specs. Met | For Joining | Color | 1-11 | 12-Up | |||
5.5 fl. oz. Tube | ||||||||||||||
| 3 | 3 | 600% | Not Rated | Not Rated | Not Rated | -20 to 180 | ASTM C920 | Composite Glass Masonry Metal Plastic Wood | White | 7582T16 | 00000 | 00000 | ||
10.1 fl. oz. Cartridge | ||||||||||||||
| 3 | 3 | 600% | Not Rated | Not Rated | Not Rated | -20 to 180 | ASTM C920 | Composite Glass Masonry Metal Plastic Wood | White | 7582T18 | 0000 | 0000 | ||
UV-Resistant Glass Sealants
Sika Sikaflex Silicone Rubber
|
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Hardness Rating | Temp. Range, ° F | For Joining | Choose a Color | Each | ||
| 295 | 10.1 | Cartridge | 60 | 72 | 700% | -50% to 50% | Soft (Durometer 35A) | -40 to 190 | Plastic Rubber Plastic to Glass Rubber to Glass | Black, White | 6937T8 | 000000 | |
Low-Outgassing Silicone Rubber Sealants
|
Cartridge |
Tested to meet ASTM E595, a standard used by NASA, these sealants fill joints and seams while releasing almost no volatile emissions that could damage sensitive electronics, even in a vacuum. Made of silicone rubber, they’re RTV (room-temperature vulcanizing), so they’ll fully harden at room temperature.
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, day | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Temp. Range, ° F | Specs. Met | For Joining | Color | Each | ||
| 5.8 | Cartridge | 150 | 7 | 420% | -25% to 25% | 600 | Medium Soft (Durometer 36A) | -200 to 500 | ASTM E595 | Composite Glass Metal Plastic Rubber | White | 4842N11 | 0000000 | |
Noncorrosive Silicone Rubber Sealants with Material Certification
|
This sealant includes a material certificate with traceable lot number, test report, and product shelf life. Also known as neutral-cure, this sealant won't discolor copper, brass, and concrete. It’s non-sagging, so it won't drip from vertical and overhead surfaces. Made from silicone rubber, this sealant is RTV (room-temperature vulcanizing). It cannot be sold to California because it exceeds local regulatory limits on VOC (volatile organic compounds).
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch. This sealant is good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | Temp., ° F | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Color (Clarity) | Cannot Be Sold To | Each | |||
Momentive Silicone Rubber | |||||||||||||||||
| RTV6708 | 10.1 | Cartridge | 25 | 24 | 450% | Not Rated | 225 | Soft (Durometer 18A) | -75 | 400 | Glass Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | White (Semi-Clear) | California | 7547A593 | 000000 | ||
High-Strength Self-Leveling Concrete Joint Sealants
|
Seal concrete joints in high-traffic locations—these sealants stand up to heavy wear and tear, such as steel wheel traffic. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | For Max. Crack | Each | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, min. | Mix Ratio | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Wd. | Dp. | Application Temp. Range, ° F | Temp. Range, ° F | For Joining | Color | Each | Pkg. Qty. | Pkg. | ||||
Loctite® Polyurethane Rubber | ||||||||||||||||||||||
| PC 6231 | 8.6 | Cartridge | 3 | 90 | 1:1 | 82% | -10% to 10% | 1,200 | Hard (Durometer 75A) | 3/4" | 2 1/4" | -40 to 105 | -40 to 120 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood | Gray | 1660N14 | 000000 | 12 | 1660N141 | 0000000 | ||
Structural Silicone Rubber Sealants with Material Certification
|
These sealants include a material certificate with traceable lot number, test report, and product shelf life. They are structural sealants that combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone rubber, these sealants are RTV (room-temperature vulcanizing). They cannot be sold to California due to local regulatory limits on VOC (volatile organic compounds).
Elongation indicates flexibility—the higher the values are, the more sealants can stretch. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | Temp., ° F | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Color (Clarity) | Cannot Be Sold To | Each | |||
Momentive Silicone Rubber | |||||||||||||||||
| RTV157 | 2.8 | Tube | 30 | 24 | 825% | -25% to 25% | 975 | Soft (Durometer 28A) | -75 | 400 | Glass Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | Gray (Opaque) | California | 7589A31 | 000000 | ||
| RTV159 | 2.8 | Tube | 30 | 24 | 825% | -25% to 25% | 1,025 | Soft (Durometer 28A) | -75 | 500 | Glass Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | Red (Opaque) | California | 7589A33 | 00000 | ||
Structural Silicone Rubber Sealants
 | |
Cartridge | Tube |
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone rubber, these sealants are RTV (room-temperature vulcanizing).
Elongation indicates flexibility—the higher the values are, the more sealants can stretch. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation.
Cannot Be Sold To—Sealants cannot be sold to the listed areas due to local regulatory limits on VOC (volatile organic compounds).
Container | Temp., ° F | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Color (Clarity) | Cannot Be Sold To | Each | |||
Momentive Silicone Rubber | |||||||||||||||||
| RTV157 | 2.8 | Tube | 30 | 24 | 825% | -25% to 25% | 975 | Soft (Durometer 28A) | -75 | 400 | Glass Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | Gray (Opaque) | California | 7589A21 | 000000 | ||
| RTV157 | 5.4 | Cartridge | 30 | 24 | 825% | -25% to 25% | 975 | Soft (Durometer 28A) | -75 | 400 | Glass Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | Gray (Opaque) | California | 7589A22 | 000000 | ||
| RTV159 | 2.8 | Tube | 30 | 24 | 825% | -25% to 25% | 1,025 | Soft (Durometer 28A) | -75 | 500 | Glass Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | Red (Opaque) | California | 7589A23 | 00000 | ||
| RTV159 | 5.4 | Cartridge | 30 | 24 | 825% | -25% to 25% | 1,025 | Soft (Durometer 28A) | -75 | 500 | Glass Metal Plastic Rubber Metal to Glass Metal to Plastic Metal to Rubber Plastic to Glass Plastic to Rubber Rubber to Glass | Red (Opaque) | California | 7589A24 | 000000 | ||
