About Sealant Flexibility
More
Surface Filler Patches
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Lg. | Wd. | Begins to Harden, min. | Reaches Full Strength, hrs. | Mix Ratio | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Surface Fillers | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
2" | 12" | 1 | 24 | 1:1 | Yes | -85° to 220° | Red | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 000000 |
2" | 20" | 1 | 24 | 1:1 | Yes | -85° to 220° | Amber | Machine, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
4" | 6" | 1 | 24 | 1:1 | Yes | -85° to 220° | Blue | Machine, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
4" | 12" | 1 | 24 | 1:1 | Yes | -85° to 220° | Green | Machine, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
Light-Activated Surface Filler Patches
An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. When exposed to sunlight or a UV lamp, they begin to harden immediately. Patches are waterproof.
Formulation | Lg. | Wd. | Begins to Harden, sec. | Reaches Full Strength, min. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Polyester | 6" | 3" | 1 | 50 | Yes | -30° to 365° | Beige | Drill, Painted, Sand, Saw, Tap | Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Concrete, Wood, Metal | 0000000 | 000000 |
Water-Resistant Surface Fillers
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
Paste fillers resist alkalies, solvents, gasoline, and oil.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Surface Fillers | |||||||||||||
2 | Tube | 5 | 60 min. | Paste | 1:1 | 12 sq. in. @ 1/4" | 1/2" | Not Rated to 200° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 000000 |
2 | Jar, Bottle | 20 | 24 hrs. | Paste | 5:1 | 8 1/2 sq. in. @ 1/4" | 1 1/2" | Not Rated to 185° | White | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
2 | Jar, Bottle | 20 | 24 hrs. | Paste | 5:1 | 8 1/2 sq. in. @ 1/4" | 1 1/2" | Not Rated to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
14 | Can, Jar | 20 | 24 hrs. | Paste | 5:1 | 62 sq. in. @ 1/4" | 1 1/2" | Not Rated to 185° | White | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
14 | Can, Jar | 20 | 24 hrs. | Paste | 5:1 | 62 sq. in. @ 1/4" | 1 1/2" | Not Rated to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
Fuel-Resistant Surface Fillers
Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.
1.5-pint container can treat a 10-gallon fuel tank. 3-pint container can treat a 20-gallon fuel tank.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, pt. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
1.5 | Can | 5 | 24 | Thick Liquid | 2:1 | No | 70° to 90° | Amber | Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain | 0000000 | 000000 |
3 | Can | 5 | 24 | Thick Liquid | 2:1 | No | 70° to 90° | Amber | Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain | 0000000 | 00000 |
Surface Fillers for Plastic
Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.
Devcon Flexane 80 Putty can be used with vinyl plastic and rubber.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight | Type | Begins to Harden | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Flexane 80 Putty | |||||||||||||
15820 | 1 lbs. | Can | 20 min. | 7 days | Putty | 2.6:1 | 90 sq. in. @ 1/4" | -40° to 180° | Black | Sand | Vinyl Plastic, EPDM Rubber, SBR Rubber | 00000000 | 0000000 |
Silicone Sealants
Made from silicone, these sealants are RTV (room-temperature vulcanizing). They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Specifications Met | Clarity | Choose a Color | Each | |
Momentive/GE Silicone | ||||||||||||||
RTV102 | 2.8 | Tube | 15 min. | 24 hrs. | 450% | Not Rated | Soft (Durometer 30A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, MIL-A-46106 Group III Type I, NSF/ANSI 51, UL Recognized Component | Opaque | White | 00000000 | 000000 |
RTV102 | 10.1 | Cartridge | 15 min. | 24 hrs. | 450% | Not Rated | Soft (Durometer 30A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, MIL-A-46106 Group III Type I, NSF/ANSI 51, UL Recognized Component | Opaque | White | 00000000 | 00000 |
RTV103 | 2.8 | Tube | 15 min. | 24 hrs. | 450% | Not Rated | Soft (Durometer 30A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, MIL-A-46106 Group III Type I, NSF/ANSI 51, UL Recognized Component | Opaque | Black | 00000000 | 00000 |
RTV103 | 10.1 | Cartridge | 15 min. | 24 hrs. | 450% | Not Rated | Soft (Durometer 30A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, MIL-A-46106 Group III Type I, NSF/ANSI 51, UL Recognized Component | Opaque | Black | 00000000 | 00000 |
RTV106 | 2.8 | Tube | 15 min. | 24 hrs. | 400% | -25% to 25% | Soft (Durometer 30A) | -55° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group III Type I, NSF/ANSI 51, UL Recognized Component | Opaque | Red | 00000000 | 00000 |
RTV106 | 5.4 | Cartridge | 15 min. | 24 hrs. | 400% | -25% to 25% | Soft (Durometer 30A) | -55° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group III Type I, NSF/ANSI 51, UL Recognized Component | Opaque | Red | 00000000 | 000000 |
RTV106 | 10.1 | Cartridge | 15 min. | 24 hrs. | 400% | -25% to 25% | Soft (Durometer 30A) | -55° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group III Type I, NSF/ANSI 51, UL Recognized Component | Opaque | Red | 00000000 | 00000 |
RTV108 | 2.8 | Tube | 15 min. | 24 hrs. | 450% | Not Rated | Soft (Durometer 30A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, MIL-A-46106 Group III Type I, NSF/ANSI 51, UL Recognized Component | Semi-Clear | White | 00000000 | 00000 |
RTV108 | 10.1 | Cartridge | 15 min. | 24 hrs. | 450% | Not Rated | Soft (Durometer 30A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, MIL-A-46106 Group III Type I, NSF/ANSI 51, UL Recognized Component | Semi-Clear | White | 00000000 | 00000 |
RTV109 | 10.1 | Cartridge | 15 min. | 24 hrs. | 450% | Not Rated | Soft (Durometer 30A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, MIL-A-46106 Group III Type I, NSF/ANSI 51, UL Recognized Component | Opaque | Aluminum | 00000000 | 00000 |
RTV5818 | 10.1 | Cartridge | 15 min. | 12 hrs. | 500% | -25% to 25% | Soft (Durometer 23A) | -60° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | UL Listed | Semi-Clear | Clear | 00000000 | 00000 |
Silicone | ||||||||||||||
__ | 9.8 | Cartridge | 5 min. | 24 hrs. | Not Rated | -25% to 25% | Not Rated | -40° to 350° | Metal Metal to Plastic Metal to Glass Plastic Plastic to Glass Glass | ASTM C920 Type S Grade NS Class 25 | __ | 000000 | 00000 |
PR-1200 Primer for Dow Corning 700, 732, 733, 736, Loctite®, 76435T21, 76435T11, and 7545A611 Sealants (10.9 fl. oz. Bottle) | 0000000 | Each | 000000 |
Silicone Sealants with Material Certification
These sealants include a material certificate with traceable lot number, test report, and product shelf life. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Tensile Strength, psi | Hardness | Temp. Range, °F | Specifications Met | For Joining | Clarity | Color | Each | |
Momentive/GE Silicone | ||||||||||||||
RTV102 | 2.8 | Tube | 15 min. | 24 hrs. | 450% | 400 | Soft (Durometer 30A) | -75° to 400° | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, NSF/ANSI 51, UL Recognized Component | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | Opaque | White | 00000000 | 000000 |
RTV102 | 10.1 | Cartridge | 15 min. | 24 hrs. | 450% | 400 | Soft (Durometer 30A) | -75° to 400° | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, NSF/ANSI 51, UL Recognized Component | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | Opaque | White | 00000000 | 00000 |
RTV103 | 2.8 | Tube | 15 min. | 24 hrs. | 450% | 400 | Soft (Durometer 30A) | -75° to 400° | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, NSF/ANSI 51, UL Recognized Component | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | Opaque | Black | 00000000 | 00000 |
RTV103 | 10.1 | Cartridge | 15 min. | 24 hrs. | 450% | 400 | Soft (Durometer 30A) | -75° to 400° | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, NSF/ANSI 51, UL Recognized Component | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | Opaque | Black | 00000000 | 00000 |
RTV106 | 2.8 | Tube | 15 min. | 24 hrs. | 400% | 375 | Soft (Durometer 30A) | -75° to 500° | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group III Type I, NSF/ANSI 51, UL Recognized Component | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | Opaque | Red | 00000000 | 00000 |
RTV106 | 10.1 | Cartridge | 15 min. | 24 hrs. | 400% | 375 | Soft (Durometer 30A) | -75° to 500° | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group III Type I, NSF/ANSI 51, UL Recognized Component | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | Opaque | Red | 00000000 | 00000 |
RTV108 | 2.8 | Tube | 15 min. | 24 hrs. | 450% | 400 | Soft (Durometer 30A) | -75° to 400° | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, NSF/ANSI 51, UL Recognized Component | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | Semi-Clear | White | 00000000 | 00000 |
RTV108 | 10.1 | Cartridge | 15 min. | 24 hrs. | 450% | 400 | Soft (Durometer 30A) | -75° to 400° | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, NSF/ANSI 51, UL Recognized Component | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | Semi-Clear | White | 00000000 | 00000 |
RTV109 | 10.1 | Cartridge | 15 min. | 24 hrs. | 450% | 400 | Soft (Durometer 30A) | -75° to 400° | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, NSF/ANSI 51, UL Recognized Component | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | Opaque | Aluminum | 00000000 | 00000 |
Self-Leveling Silicone Sealants with Material Certification
These sealants include a material certificate with traceable lot number, test report, and product shelf life. Thinner than non-sagging sealants, these sealants flow easily into cracks and have a smooth finish. They’re also known as RTV (room-temperature vulcanizing).
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Tensile Strength, psi | Hardness | Temp. Range, °F | Specifications Met | For Joining | Color | Each | |
Momentive/GE Silicone | |||||||||||||
RTV118 | 2.8 | Tube | 20 min. | 24 hrs. | 325% | 325 | Soft (Durometer 25A) | -75° to 400° | FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type II, NSF/ANSI 51, UL Recognized Component | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | Clear | 0000000 | 000000 |
Self-Leveling Silicone Sealants
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
Dow Corning Silicone | |||||||||||||
734 | 3 | Tube | 15 min. | 24 hrs. | 315% | -25% to 25% | 215 | Soft (Durometer 27A) | -85° to 350° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass | 0000000 | 000000 | |
734 | 10.1 | Cartridge | 15 min. | 24 hrs. | 315% | -25% to 25% | 215 | Soft (Durometer 27A) | -85° to 350° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass | 0000000 | 00000 | |
Momentive/GE Silicone | |||||||||||||
RTV116 | 11.7 | Cartridge | 30 min. | 3 days | 350% | -25% to 25% | 350 | Soft (Durometer 20A) | -75° to 500° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass | Red | 0000000 | 000000 |
RTV118 | 2.8 | Tube | 20 min. | 24 hrs. | 325% | Not Rated | 325 | Soft (Durometer 25A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | Clear | 0000000 | 00000 |
Primer for Dow Corning and Loctite® Sealants (16-oz. Bottle) | 0000000 | Each | 000000 |
Noncorrosive Silicone Sealants
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Cannot Be Sold To | Choose a Color | Each | |
Dow Corning Silicone | |||||||||||||
737 | 3 | Tube | 5 min. | 24 hrs. | 300% | -25% to 25% | Soft (Durometer 30A) | -85° to 350° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Composites Composites to Glass Glass | __ | Clear | 0000000 | 000000 |
737 | 10.1 | Cartridge | 3 min. | 24 hrs. | 300% | -25% to 25% | Soft (Durometer 30A) | -85° to 350° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Composites Composites to Glass Glass | __ | 000000 | 00000 | |
Loctite® Silicone | |||||||||||||
SI 5011 CL | 2.7 | Tube | 20 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 20A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Clear | 0000000 | 00000 |
SI 5011 CL | 10.1 | Cartridge | 20 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 20A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Clear | 0000000 | 00000 |
SI 5109 | 10.1 | Cartridge | 60 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 15A) | -75° to 600° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Red | 0000000 | 00000 |
Permatex Silicone | |||||||||||||
81173 | 12.9 | Cartridge | 30 min. | 24 hrs. | 350% | Not Rated | Soft (Durometer 15A) | -75° to 450° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | Black | 0000000 | 00000 |
Primer for Dow Corning 737 and 739 Sealants (16 fl. oz. Bottle) | 0000000 | Each | 000000 |
Low-Outgassing Silicone Sealants
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum. They’re made of silicone, so they’re RTV (room-temperature vulcanizing).
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | Specifications Met | For Joining | Color | Each | |
5.8 | Cartridge | 150 min. | 7 days | 420% | -25% to 25% | 600 | Durometer 36A (Medium Soft) | -200° to 500° | ASTM E595 | Metal Plastic Rubber Composites Glass | White | 0000000 | 0000000 |
All-Weather Application Sealants
Apply these sealants on wet surfaces and in cold temperatures. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Sealants with 1,000% elongation can be applied through running water.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to the regions listed are restricted by local chemical regulations, including limits on VOC (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Choose a Color | Cannot Be Sold To | Each | ||
Hybrid Polymer | |||||||||||||
9 | Cartridge | 10 min. | 3 days | 450% | -50% to 50% | Medium Soft (Durometer 44A) | -10° to 150° | Metal Metal to Glass Glass Masonry Wood Wood to Glass | Clear | __ | 000000000 | 000000 | 00 |
9 1/2 | Cartridge | 20 min. | 3 days | 570% | -50% to 50% | Soft (Durometer 32A) | -10° to 150° | Metal Metal to Glass Glass Masonry Wood Wood to Glass | Black | __ | 000000000 | 00000 | 00 |
9 1/2 | Cartridge | 20 min. | 3 days | 570% | -50% to 50% | Soft (Durometer 32A) | -10° to 150° | Metal Metal to Glass Glass Masonry Wood Wood to Glass | White | __ | 000000000 | 00000 | 00 |
Each | |||||||||||||
1-11 | 12-Up | ||||||||||||
10 | Cartridge | 5 min. | 14 days | Not Rated | -25% to 25% | Not Rated | -20° to 190° | Metal Metal to Plastic Plastic Asphalt Masonry Wood | White | CA | 0000000 | 00000 | 000000 |
10 | Cartridge | 10 min. | 24 hrs. | Not Rated | -25% to 25% | Not Rated | -65° to 190° | Metal Metal to Plastic Plastic Asphalt Masonry Wood | Clear | __ | 0000000 | 00000 | 00000 |
10 | Cartridge | 8 hrs. | 14 days | 550% | -25% to 25% | Soft (Durometer 22A) | -20° to 200° | Metal Metal to Plastic Metal to Composites Plastic Plastic to Composites Composites Masonry Wood | __ | 000000 | 00000 | 00000 | |
10.3 | Cartridge | 45 min. | 4 days | 1,000% | Not Rated | Soft (Durometer 25A) | -40° to 180° | Metal Plastic Rubber Asphalt Composites Glass Masonry Wood | CA, Canada | 000000 | 00000 | 00000 |
Optically Clear All-Weather Application Sealants
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics. Apply it in cold temperatures, on wet surfaces, and even through running water. The sealant is non-sagging, so it won't drip from vertical and overhead surfaces. It cannot be sold to the regions listed due to local regulatory limits on VOC (volatile organic compounds).
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch. This sealant is good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Tensile Strength, psi | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Cannot Be Sold To | Each | |
Hybrid Polymer | ||||||||||||
10.3 | Cartridge | 45 min. | 4 days | 1,000% | 45 | Soft (Durometer 20A) | 40° to 140° | -40° to 180° | Metal Metal to Plastic Metal to Composites Metal to Glass Plastic Plastic to Composites Plastic to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; CO; CT; DC; DE; MA; MD; ME; NJ; Northern VA; NY; PA; RI; UT; VT | 0000000 | 000000 |
Clean Room Sealants
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces. Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/Expansion Tolerance | Hardness | Temp. Range, °F | Specifications Met | For Joining | Choose a Color | Each | |
Polyether | ||||||||||||
10.1 | Cartridge | 20 min. | 7 days | 275% | -25% to 25% | Medium Soft (Durometer 38A) | -40° to 200° | ASTM C920 Type S Grade NS Class 25, Fed. Spec. TT-S-00230C Type II Class B | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 |
Puncture-Resistant Sealants
Form seals that resist punctures, cuts, and abrasion to withstand heavy wear and tampering. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Polyurethane | ||||||||||||
10.1 | Cartridge | 90 min. | 48 hrs. | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | White | 0000000 | 000000 |
20 | Sausage Pack | 90 min. | 48 hrs. | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | White | 0000000 | 00000 |
All-Weather Application Structural Sealants
Apply these sealants in cold temperatures, on wet surfaces, and even through running water. They are structural sealants that combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
Polyether | ||||||||||||
5 fl. oz. | Tube | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | White | 000000 | 00000 |
10.1 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 0000000 | 00000 | |
20 fl. oz. | Sausage Pack | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 00000 | |
28 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 00000 | |
2 gal. | Pail | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 | |
5 gal. | Pail | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 |
Structural Sealants
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
3M Hybrid Polymer | ||||||||||||
760 UV | 9.8 | Cartridge | 30 min. | 24 hrs. | 100% | Not Rated | Medium Hard (Durometer 55A) | -40° to 212° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 000000 | |
760 UV | 20.3 | Sausage Pack | 30 min. | 24 hrs. | 100% | Not Rated | Medium Hard (Durometer 55A) | -40° to 212° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 00000 | |
3M Polyurethane | ||||||||||||
540 | 20.3 | Sausage Pack | 90 min. | 24 hrs. | 600% | -25% to 25% | Medium Soft (Durometer 40A) | -40° to 190° | Metal Plastic Rubber Composites Wood | 00000000 | 00000 | |
551 | 20.3 | Sausage Pack | 180 min. | 24 hrs. | 600% | Not Rated | Medium (Durometer 45A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | White | 00000000 | 00000 |
560 | 20.3 | Sausage Pack | 60 min. | 24 hrs. | 300% | Not Rated | Medium Hard (Durometer 55A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 00000 |
Submersible Sealants
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces. They’re marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
Silicone sealant is FDA compliant for direct contact with food. It will not harm fish, so it's safe for use in aquariums. It's also known as RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | Specifications Met | For Joining | Color | Each | |
Silicone | ||||||||||||
2.8 | Tube | 5 min. | 48 hrs. | Not Rated | -25% to 25% | Not Rated | -40° to 400° | ASTM C920 Type S Grade NS Class 25, FDA Compliant 21 CFR 177.2600 | Metal Plastic Rubber Glass | Clear | 0000000 | 00000 |
Self-Leveling Oil- and Fuel-Resistant Sealants
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint expansion/compression tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint expansion/compression tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Sealants that cannot be sold to California exceed local regulatory limits on VOC (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Cannot Be Sold To | Each | |
Buna-N | |||||||||||||
4 | Tube | 10 min. | 24 hrs. | 1,000% | Not Rated | Not Rated | Soft (Durometer 25A) | -30° to 300° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | 0000000 | 00000 | |
10.3 | Cartridge | 10 min. | 24 hrs. | 600% | Not Rated | Not Rated | Soft (Durometer 30A) | -30° to 300° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | 0000000 | 0000 | |
Thermoplastic | |||||||||||||
2 | Tube | 3 min. | 3 hrs. | 25% | -2% to 2% | 7,250 | Extra Hard (Durometer 90A) | -40° to 150° | Metal Plastic Rubber Asphalt Composites Glass Masonry Wood | Clear | __ | 0000000 | 0000 |
Oil- and Fuel-Resistant Sealants
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces. They’re thicker than most non-sagging sealants, so they can be used in vertical joints up to 1/2" wide.
Elongation indicates flexibility—the higher the values are, the more sealants can stretch. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Silicone sealants have excellent ozone resistance.
Sealants that cannot be sold to California exceed local regulatory limits on VOC (volatile organic compounds).
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Cannot Be Sold To | Each | |
Buna-N | ||||||||||||||
__ | 10.3 | Cartridge | 10 min. | 24 hrs. | 100% | Not Rated | Not Rated | Soft (Durometer 20A) | -30° to 300° | Metal Plastic Rubber Composites Glass Masonry Wood | Aluminum | CA | 0000000 | 000000 |
Momentive/GE Silicone | ||||||||||||||
FRV1106 | 5.4 | Cartridge | 20 min. | 7 days | 200% | -25% to 25% | 485 | Medium Soft (Durometer 35A) | -75° to 395° | Metal Plastic Rubber Composites Glass | Red | __ | 00000000 | 000000 |
FRV1106FC | 5.4 | Cartridge | 30 min. | 7 days | 300% | -25% to 25% | 500 | Soft (Durometer 30A) | -75° to 395° | Metal Plastic Rubber Composites Glass | Red | __ | 00000000 | 000000 |
Structural Oil- and Fuel-Resistant Sealants
Impervious to the swelling effects of oils, fuels, and solvents, use this high-strength silicone sealant to assemble and repair fuel systems and tanks. Silicone forms a tough, rubbery, UV-resistant seal that remains flexible over time. It's non-sagging, so it won't drip from vertical and overhead surfaces. Also known as RTV (room-temperature vulcanizing).
Elongation and joint expansion/compression tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. This sealant is best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Dow Corning Silicone | |||||||||||||
730 FS | 3 | Tube | 12 min. | 24 hrs. | 200% | Not Rated | 300 | Medium Soft (Durometer 40A) | -70° to 350° | Metal, Plastic, Rubber, Composites, Masonry | White | 0000000 | 0000000 |
730 FS | 5.8 | Cartridge | 12 min. | 24 hrs. | 200% | Not Rated | 300 | Medium Soft (Durometer 40A) | -70° to 350° | Metal, Plastic, Rubber, Composites, Masonry | White | 0000000 | 000000 |
High-Strength Self-Leveling Concrete Joint Sealants
Seal concrete joints in high-traffic locations—these sealants stand up to heavy wear and tear, such as steel wheel traffic. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
When Sika Sikaflex Polyurethane requires a primer, for best results use Primer 260 on metal and Primer 449 on plastic and rubber.
Container | For Max. Crack | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Mix Ratio | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Loctite® Polyurethane | |||||||||||||||
PC 6231 | 8.6 | Cartridge | 3 min. | 90 min. | 1:1 | 82% | -10% to 10% | Hard (Durometer 75A) | 3/4" | 2 1/4" | -40° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Gray | 0000000 | 000000 |
Sika Sikaflex Polyurethane | |||||||||||||||
1C SL | 10.1 | Cartridge | 2 hrs. | 5 days | __ | 320% | -25% to 25% | Medium Soft (Durometer 35A) | 1/2" | 1/2" | -40° to 170° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Limestone | 0000000 | 00000 |
1C SL | 29 | Cartridge | 2 hrs. | 5 days | __ | 320% | -25% to 25% | Medium Soft (Durometer 35A) | 1/2" | 1/2" | -40° to 170° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Limestone | 0000000 | 00000 |
High-Strength Concrete Joint Sealants
Seal concrete joints in high-traffic areas—these sealants stand up to heavy wear and tear, such as steel wheel traffic. They're non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | For Max. Crack | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Sika Sikasil Silicone | ||||||||||||||
728 NS | 29 | Cartridge | 25 min. | 7 days | 1,000% | -50% to 100% | Soft (Durometer 10A) | 1" | 1/2" | -80° to 350° | Metal, Plastic, Rubber, Composites, Masonry, Wood | Limestone | 0000000 | 000000 |
Silicone | ||||||||||||||
__ | 20 | Sausage Pack | 60 min. | 7 days | 1,000% | -50% to 100% | Medium Hard (Durometer 55A) | 1" | 1/2" | -20° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Gray | 000000 | 00000 |
__ | 29 | Cartridge | 60 min. | 7 days | 1,000% | -50% to 100% | Medium Hard (Durometer 55A) | 1" | 1/2" | -20° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Gray | 000000 | 00000 |
Primer for Sika Sikasil Sealant (8-fl. oz. Bottle) | 0000000 | Each | 000000 |
All-Weather Application Concrete Joint Sealants
Apply these sealants on wet surfaces and in cold temperatures. They're non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | For Max. Crack | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Choose a Color | Each | |
Polyether | |||||||||||||||
28 | Cartridge | 30 min. | 48 hrs. | 1,000% | -50% to 50% | 125 | Not Rated | 1" | 1" | 32° to 120° | -75° to 300° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
Self-Leveling All-Weather Application Concrete Joint Sealants
Apply these sealants on wet surfaces and in cold temperatures. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.
Container | For Max. Crack | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Choose a Color | Each | |
Hybrid Polymer | ||||||||||||||
28 | Cartridge | 45 min. | 48 hrs. | 400% | Not Rated | Soft (Durometer 25A) | 1" | 1" | 35° to 120° | -75° to 300° | Metal, Plastic, Rubber, Asphalt, Composites, Masonry, Wood | 0000000 | 000000 |
Edge Sealants
Prevent the edges of tape, signs, and graphics from peeling by sealing out water and debris.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Self-Leveling Roof Joint Sealants
Keep out the elements by sealing roof joints. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish. They're good for use in environments with wide temperature fluctuation.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Tensile Strength | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Color | Each | |
Buna-N | |||||||||||
10.3 | Cartridge | 30 min. | 3 days | Not Rated | Not Rated | 40° to 100° | Not Rated to 400° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Aluminum | 0000000 | 000000 |
EPDM Rubber | |||||||||||
10.3 | Cartridge | 4 hrs. | 3 days | Not Rated | Not Rated | 20° to 120° | -40° to 200° | Metal, Plastic, Rubber, Asphalt, Composites, Masonry, Wood | Black | 0000000 | 00000 |
Butyl Rubber | |||||||||||
10 | Cartridge | 2 hrs. | 10 days | Not Rated | Not Rated | 40° to 90° | -20° to 180° | Metal, Plastic, Rubber, Composites, Masonry, Wood | White | 00000000 | 0000 |
Roof Joint Sealants
Keep out the elements by sealing roof joints. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Buna-N | ||||||||||||
10.3 | Cartridge | 30 min. | 3 days | Not Rated | Not Rated | Not Rated | Not Rated | Not Rated to 400° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Aluminum | 0000000 | 000000 |
All-Weather Application Roof Joint Sealants
Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater. They're non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.
Elongation indicates flexibility—the higher the value is, the more joint movement a sealant can sustain.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Tensile Strength, psi | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Color | Each | |
Hybrid Polymer | ||||||||||||
10 | Cartridge | 30 min. | 24 hrs. | 559% | 235 | Soft (Durometer 33A) | 30° to 120° | -40° to 200° | Metal, Plastic, Rubber, Asphalt, Masonry | Black | 000000 | 000000 |
10 | Cartridge | 60 min. | 24 hrs. | 465% | 115 | Soft (Durometer 19A) | 30° to 120° | -40° to 200° | Metal, Plastic, Rubber, Asphalt, Masonry | White | 000000 | 00000 |