Filter by
About Plastic
More
Chemical-Resistant PVC 90° Angles
- Color: Gray
- Temperature Range: 32° to 140° F
- Tensile Strength: 7,000-7,800 psi (Good)
- Impact Strength: 0.7-3 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110-R120 (Hard)
- For Use Outdoors: No
Because these PVC Type 1 90° angles stand up to acids and alkalies, they’re often used to fabricate frames, tracks, and supports in chemical-processing applications. This material is easy to thermoform, plus it is an excellent electrical insulator.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 5 ft. Lg. | |||||
|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Each | |
0.08" Wall Thick. (-0.01" to 0.001") | |||||||
| 1/2" | 0.000" to 0.125" | 1/2" | 0.000" to 0.125" | 0.420" | 0.42" | 0000000 | 00000 |
| 3/4" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 0.670" | 1.42" | 0000000 | 00000 |
| 3/4" | 0.000" to 0.125" | 3/4" | 0.000" to 0.125" | 0.670" | 0.67" | 0000000 | 00000 |
0.08" Wall Thick. (-0.01" to 0.01") | |||||||
| 2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1.920" | 1.92" | 0000000 | 00000 |
1/8" Wall Thick. (-0.063" to 0.063") | |||||||
| 1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 7/8" | 7/8" | 0000000 | 00000 |
1/8" Wall Thick. (-0.015" to 0.015") | |||||||
| 3/4" | -0.125" to 0.125" | 3" | -0.125" to 0.125" | 5/8" | 2 7/8" | 0000000 | 00000 |
| 1 1/4" | 0.000" to 0.040" | 1 1/4" | 0.000" to 0.040" | 1 1/8" | 1 1/8" | 0000000 | 00000 |
| 1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 3/8" | 1 3/8" | 0000000 | 00000 |
| 2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 7/8" | 1 7/8" | 0000000 | 00000 |
0.157" Wall Thick. (-0.019" to 0.019") | |||||||
| 3/4" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 0.593" | 1.343" | 0000000 | 00000 |
3/16" Wall Thick. (-0.063" to 0.063") | |||||||
| 1 1/4" | -0.125" to 0.125" | 1 1/4" | -0.125" to 0.125" | 1 1/16" | 1 1/16" | 0000000 | 00000 |
3/16" Wall Thick. (-0.023" to 0.023") | |||||||
| 1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 5/16" | 1 5/16" | 0000000 | 00000 |
| 2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 13/16" | 1 13/16" | 0000000 | 00000 |
1/4" Wall Thick. (-0.063" to 0.063") | |||||||
| 1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 1/4" | 1 1/4" | 0000000 | 00000 |
| 2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 3/4" | 1 3/4" | 0000000 | 00000 |
1/4" Wall Thick. (-0.03" to 0.03") | |||||||
| 1 1/4" | 0.000" to 0.040" | 1 1/4" | 0.000" to 0.040" | 1" | 1" | 0000000 | 00000 |
0.275" Wall Thick. (-0.033" to 0.033") | |||||||
| 2 3/8" | -0.125" to 0.125" | 2 3/8" | -0.125" to 0.125" | 2.100" | 2.1" | 0000000 | 00000 |
| 3 1/2" | -0.125" to 0.125" | 3 1/2" | -0.125" to 0.125" | 3.225" | 3.225" | 0000000 | 000000 |
Impact- and Chemical-Resistant PVC 90° Angles
- Color: Black
- Temperature Range: See table
- Tensile Strength: 5,600 psi (Good)
- Impact Strength: 20 ft.-lbs./in. (Excellent)
- Hardness: Durometer 80D (Hard)
- For Use Outdoors: Yes
- Specifications Met: UL 94 V-0, NSF/ANSI 51
Made of PVC Type 2 plastic, these 90° angles resist impact and chemicals. More impact resistant than PVC Type 1, PVC Type 2 is commonly used where protection from bumps and strikes is needed. It’s also more impact resistant than silicone, although not as resistant to heat. Since it stands up to acids and alkalies, it’s often used to make parts for chemical processing applications.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Temperature Range, °F | 2 ft. Lg. | 4 ft. Lg. | 8 ft. Lg. | |
0.06" Wall Thickness (-0.01" to 0.01") | ||||||||||
| 1/2" | -0.01" to 0.01" | 1/2" | -0.01" to 0.01" | 0.44" | 0.44" | 40° to 140° | 00000000 | |||
| 1" | -0.02" to 0.02" | 1" | -0.02" to 0.02" | 0.94" | 0.94" | 40° to 140° | 00000000 | |||
0.06" Wall Thickness (-0.008" to 0.008") | ||||||||||
| 3/4" | -0.015" to 0.015" | 3/4" | -0.015" to 0.015" | 0.69" | 0.69" | 40° to 140° | 0000000 | |||
0.065" Wall Thickness (-0.01" to 0.01") | ||||||||||
| 1 1/2" | -0.025" to 0.025" | 1 1/2" | -0.025" to 0.025" | 1.435" | 1.435" | 40° to 140° | 00000000 | |||
| 2" | -0.02" to 0.02" | 2" | -0.02" to 0.02" | 1.935" | 1.935" | -20° to 140° | 00000000 | |||
0.1" Wall Thickness (-0.015" to 0.015") | ||||||||||
| 3/4" | -0.015" to 0.015" | 3/4" | -0.015" to 0.015" | 0.65" | 0.65" | 40° to 140° | 00000000 | |||
| 1" | -0.02" to 0.02" | 1" | -0.02" to 0.02" | 0.9" | 0.9" | 40° to 140° | 00000000 | |||
| 2" | -0.025" to 0.025" | 2" | -0.025" to 0.025" | 1.9" | 1.9" | 40° to 140° | 00000000 | |||
| 3" | -0.03" to 0.03" | 3" | -0.03" to 0.03" | 2.885" | 2.885" | -20° to 140° | 00000000 | |||
0.1" Wall Thickness (-0.01" to 0.01") | ||||||||||
| 1 1/2" | -0.02" to 0.02" | 1 1/2" | -0.02" to 0.02" | 1.39" | 1.39" | -20° to 140° | 00000000 | |||
3/16" Wall Thickness (-0.02" to 0.02") | ||||||||||
| 1 1/2" | -0.025" to 0.025" | 1 1/2" | -0.025" to 0.025" | 1.312" | 1.312" | 40° to 140° | 00000000 | |||
| 2" | -0.025" to 0.025" | 2" | -0.025" to 0.025" | 1.812" | 1.812" | 40° to 140° | 00000000 | |||
3/16" Wall Thickness (-0.0195" to 0.0195") | ||||||||||
| 3/4" | -0.02" to 0.02" | 3/4" | -0.02" to 0.02" | 0.542" | 0.542" | -20° to 140° | 00000000 | |||
| 1" | -0.02" to 0.02" | 1" | -0.02" to 0.02" | 0.792" | 0.792" | -20° to 140° | 00000000 | |||
1/4" Wall Thickness (-0.02" to 0.02") | ||||||||||
| 1 1/2" | -0.02" to 0.02" | 1 1/2" | -0.02" to 0.02" | 1.23" | 1.23" | -20° to 140° | 00000000 | |||
| 2" | -0.025" to 0.025" | 2" | -0.025" to 0.025" | 1.73" | 1.73" | -20° to 140° | 00000000 | |||
Clear Chemical-Resistant PVC 90° Angles
- Color: Clear
- Temperature Range: 32° to 140° F
- Tensile Strength: 7,260 psi (Good)
- Impact Strength: 0.48-2 ft.-lbs./in. (Poor)
- Hardness: Durometer 84D (Hard)
- For Use Outdoors: No
- Specifications Met: UL 94 V-0
When visibility is essential, use these clear 90° angles for tank parts and in chemical-processing applications. PVC resists acids and alkalies.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 5 ft. Lg. | 10 ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Each | Each | ||
1/8" Wall Thick. (-0.063" to 0.063") | |||||||||
| 1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 7/8" | 7/8" | 0000000 | 000000 | 00000000 | 000000 |
3/16" Wall Thick. (-0.063" to 0.063") | |||||||||
| 1 1/4" | -0.125" to 0.125" | 1 1/4" | -0.125" to 0.125" | 1 1/16" | 1 1/16" | 0000000 | 00000 | 00000000 | 00000 |
| 1 1/2" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 1 5/16" | 1 5/16" | 0000000 | 00000 | 00000000 | 00000 |
1/4" Wall Thick. (-0.063" to 0.063") | |||||||||
| 1 1/2" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 1 1/4" | 1 1/4" | 0000000 | 00000 | 00000000 | 00000 |
| 2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1 3/4" | 1 3/4" | 0000000 | 00000 | 00000000 | 00000 |