About Precision Flow-Adjustment Valves
More
Plastic Threaded Precision Flow-Adjustment Valves
- Valve Type: Needle
- For Use With: Water, Air, Argon, Helium, Krypton, Neon, Xenon
- Seal Material: EPDM Rubber
Plastic provides a lightweight alternative to metal valves. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. These valves have a hex nut and threads below the handle for mounting through instrument panels.
For technical drawings and 3-D models, click on a part number.
| Pipe Size  | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Panel Cutout Dia. | End-to-End Lg. | Each | |
Dark Gray PVC Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||
| 1/8 | 0.4 | 125 psi @ 140° F | 35° to 140° | 7/8" | 2" | 0000000 | 000000 |
| 1/4 | 0.4 | 125 psi @ 140° F | 35° to 140° | 7/8" | 2" | 0000000 | 00000 |
NPT Female × NPT Male | |||||||
| 1/8 | 0.3 | 125 psi @ 140° F | 35° to 140° | 7/8" | 2 1/4" | 0000000 | 00000 |
| 1/4 | 0.4 | 125 psi @ 140° F | 35° to 140° | 7/8" | 2 3/8" | 0000000 | 00000 |
NPT Male × NPT Male | |||||||
| 1/4 | 0.4 | 125 psi @ 140° F | 35° to 140° | 7/8" | 2 11/16" | 0000000 | 00000 |
| Optional Nickel-Plated Brass Mounting Nuts | 0000000 | Each | 00000 |
Precision Flow-Adjustment Valves with Barbed Fittings
- Valve Type: Needle
- For Use With: Water, Air, Argon, Helium, Krypton, Neon, Xenon
- Seal Material: EPDM Rubber
Barbs grip onto tubing, providing a secure hold. Turn the handle on these valves to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. All have a hex nut and threads below the handle for panel mounting.
For technical drawings and 3-D models, click on a part number.
| For Tube ID | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Panel Cutout Dia. | End-to-End Lg. | Each | |
Dark Gray PVC Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
Barbed × Barbed | |||||||
| 1/4" | 0.3 | 125 psi @ 140° F | 35° to 140° | 7/8" | 3 3/8" | 0000000 | 000000 |
| 3/8" | 0.3 | 125 psi @ 140° F | 35° to 140° | 7/8" | 3 3/8" | 0000000 | 00000 |
| 1/2" | 0.4 | 125 psi @ 140° F | 35° to 140° | 7/8" | 3 3/8" | 0000000 | 00000 |
| Optional Nickel-Plated Brass Mounting Nuts | 0000000 | Each | 00000 |
Precision Flow-Adjustment Valves with Push-to-Connect Fittings
- Valve Type: Needle
- For Use With: Water, Air, Argon, Helium, Krypton, Neon, Xenon
- Seal Material: EPDM Rubber
Insert tubing into the fittings on these valves—no heat, solder, or flux required. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. All valves have a hex nut and threads below the handle for mounting through instrument panels.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Panel Cutout Dia. | End-to-End Lg. | Each | |
Dark Gray PVC Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
Push to Connect × Push to Connect | |||||||
| 1/4" | 0.3 | 125 psi @ 140° F | 35° to 140° | 7/8" | 2 13/16" | 0000000 | 000000 |
| 3/8" | 0.4 | 125 psi @ 140° F | 35° to 140° | 7/8" | 2 13/16" | 0000000 | 00000 |
| Optional Nickel-Plated Brass Mounting Nuts | 0000000 | Each | 00000 |
Threaded Precision Flow-Adjustment Valves for Chemicals
To withstand aggressive and corrosive solutions in chemical-processing applications, these valves have a fluoroelastomer seal and a plastic body. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Needle
- For Use With: Water, Citric Acid, Diesel Fuel, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Nitric Acid, Phosphoric Acid, Salt Water, Soap Solutions
- Seal Material: Fluoroelastomer Rubber
- Seat Material: PTFE Plastic
- Needle Material: PVC Plastic
Precision Flow-Adjustment Valves with
Push-to-Connect Fittings for Food and Beverage
- Valve Type: Needle
- For Use With: Food, Beverage
- Seal Material: Buna-N Rubber
Insert tubing into the fittings on these valves—no heat, solder, or flux required. Designed for use in food and beverage tubing lines, they adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Threads and a hex nut below the handle allow you to install these valves in instrument panels. They have a nut that can be tightened to compress the packing if it leaks.
For technical drawings and 3-D models, click on a part number.
Precision Flow-Adjustment Valves with Barbed Fittings for Food and Beverage
- Valve Type: Needle
- For Use With: Food, Beverage
- Seal Material: PTFE Plastic
These valves have barbed fittings that grip onto tubing, providing a secure hold. They’re often used in food and beverage tubing lines to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Threads and a hex nut below the handle allow you to install these valves in instrument panels. They have a nut that can be tightened to compress the packing if it leaks.
For technical drawings and 3-D models, click on a part number.