McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    27 Products

    Deburring Scrapers for Tube Edges

    Image of Product. Front orientation. Deburring Tools. Deburring Scrapers for Tube Edges .
    Place the tool over the end of your tube and twist to deburr.
    For Deburring Outer Tube Edges and Inner Tube Edges
    Image of Specification. Front orientation. For Deburring Inner Tube Edges. Deburring Scrapers for Tube Edges .
    Image of Specification. Front orientation. For Deburring Outer Tube Edges. Deburring Scrapers for Tube Edges .

    For

    Deburring

    Inner Tube

    Edges

    For

    Deburring

    Outer Tube

    Edges

    Body
    Material
    For Use On
    Overall
    Lg.
    For Tube OD
    Blade
    Material
    Each
    Aluminum
    		Copper, Stainless Steel2 3/8"1/4" to 1 1/4"Steel2737A13000000
    Zinc AlloyAluminum, Copper, Brass, Plastic2 1/4"3/16" to 1 1/2"Steel2709A1200000

    Reamers for Deburring

    Smooth the inside and edges of holes with these reamers. Often used to finish holes in sheet metal or to remove burrs from the ends of cut pipe and conduit, they're also known as repairmen's reamers.
    Round Shank
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Deburring, Round Shank, Spiral Flute.

    Spiral Flute

    These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Lg.
    For Pipe
    Size
    Reamer Dia. (B to A)
    Material
    Flute
    Overall
    No. of
    Flutes
    Spiral
    Direction
    Cutting Dia.
    Tolerance
    For Deburring
    For Use On
    Each
    Spiral Flute
     
    Inch
    1/8 to 10.1875" to 1.2500" (3/16" to 1 1/4")High-Speed Steel
    		3 1/32"5 3/64"10Left Hand-0.003" to 0.003"Inner Pipe Edges, Inner Tube Edges, Inner Conduit Edges, Sheet EdgesAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel3017A110000000
    1/4 to 1 1/40.2500" to 1.4688" (1/4" to 1 15/32")High-Speed Steel
    		3"5"10Left Hand-0.003" to 0.003"Inner Pipe Edges, Inner Tube Edges, Inner Conduit Edges, Sheet EdgesAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel3017A12000000
    1/4 to 20.2500" to 2.2656" (1/4" to 2 17/64")High-Speed Steel
    		3 7/8"5 7/8"12Left Hand-0.003" to 0.003"Inner Pipe Edges, Inner Tube Edges, Inner Conduit Edges, Sheet EdgesAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel3017A13000000
     
    T-Handle Shank
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Deburring, T-Handle Shank, Spiral Flute.

    Spiral Flute

    No additional tools required, these reamers have an integrated handle that's easy to grip and turn.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Lg.
    For Pipe
    Size
    Reamer Dia. (B to A)
    Material
    Flute
    Overall
    No. of
    Flutes
    Spiral
    Direction
    Cutting Dia.
    Tolerance
    For Deburring
    For Use On
    Each
    Spiral Flute
     
    Inch
    1/4 to 20.2500" to 2.2656" (1/4" to 2 17/64")High-Speed Steel
    		3 7/8"5 7/8"12Left Hand-0.003" to 0.003"Inner Pipe Edges, Inner Tube Edges, Inner Conduit Edges, Sheet EdgesAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel3017A180000000
     
    L-Handle Shank
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Deburring, L-Handle Shank, Straight Flute.
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Deburring, L-Handle Shank, Spiral Flute.

    Straight Flute

    Spiral Flute

    Turn these reamers with the long ratcheting handle, which provides more leverage than a T-handle.
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    Hardened Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
    Right-Hand Spiral—These reamers pull chips upward as they cut, so they're often used in blind holes.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Lg.
    For Pipe
    Size
    Reamer Dia. (B to A)
    Material
    Flute
    Reamer
    Handle
    Ratcheting
    Handle
    No. of
    Flutes
    Spiral
    Direction
    For Deburring
    For Use On
    Each
    Straight Flute
     
    Inch
    1/8 to 20.2500" to 2.2500" (1/4" to 2 1/4")Hardened Steel6 3/8"6 5/8"16"5—Inner Pipe Edges, Inner Tube Edges, Inner Conduit EdgesAluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel3678N120000000
    3/8 to 30.3750" to 3.2500" (3/8" to 3 1/4")Hardened Steel9"10"16"5—Inner Pipe Edges, Inner Tube Edges, Inner Conduit EdgesAluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel3678N13000000
     
    Spiral Flute
     
    Inch
    1/4 to 20.1875" to 2.2500" (3/16" to 2 1/4")Hardened Steel5 1/8"6 7/8"16"6Right HandInner Pipe Edges, Inner Tube Edges, Inner Conduit EdgesAluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel3678N11000000
    2 1/2 to 42.3125" to 4.2500" (2 5/16" to 4 1/4")Hardened Steel7"10 1/2"16"9Left HandInner Pipe Edges, Inner Tube Edges, Inner Conduit EdgesAluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel3678N14000000
     

    Deburring Scraper Drill Attachments for Pipe and Tube Edges

    Image of Product. Front orientation. Deburring Tools. Deburring Scraper Drill Attachments for Pipe and Tube Edges .
    These drill attachments scrape both the inner and outer edges of plastic pipe and tube to finish them for connections. There’s a hex shank on each end—flip attachments around in your drill to switch from deburring inside edges to outside edges. Use in drills 14V and up.
    For Deburring Inner Pipe Edges, Outer Pipe Edges, Inner Tube Edges, and Outer Tube Edges
    Image of ProductInUse. For Deburring Inner Tube Edges. Front orientation. For Deburring Inner Tube Edges. Deburring Scraper Drill Attachments for Pipe and Tube Edges .
    Image of ProductInUse. For Deburring Outer Tube Edges. Front orientation. For Deburring Outer Tube Edges. Deburring Scraper Drill Attachments for Pipe and Tube Edges .

    For Deburring Inner Tube Edges

    For Deburring Outer Tube Edges

    Tools
    Replacement
    Blades
    Blade
    Body
    Material
    For Use
    On
    Overall
    Lg.
    Hex Shank
    Size
    For Tube OD
    For Pipe
    Size
    Material
    Style
    Each
    Each
    SteelPlastic4 1/2"3/8"3/4" to 2 1/2"3/8 to 2CarbideFixed3413N110000003413N12000000

    Changeable-Blade Ratcheting Deburring Scrapers

    To save time and effort, these scrapers have a ratcheting mechanism to smooth the edges of tubes and holes without removing and repositioning the scraper. Replace the blade when it’s dull, or change it with a different blade style. Adjust the length of the scraper to easily reach your workpiece.
    For Deburring Outer Tube Edges
    Image of Product. Cushion Grip. Front orientation. Cushion Grip. Changeable-Blade Ratcheting Deburring Scrapers , For Deburring Outer Tube Edges .
    Image of Product. Knurled Grip. Front orientation. Knurled Grip. Changeable-Blade Ratcheting Deburring Scrapers , For Deburring Outer Tube Edges .
    Image of Specification. Outer Tube Edge. Front orientation. For Deburring Outer Tube Edges . Changeable-Blade Ratcheting Deburring Scrapers .
    Image of Product. Front orientation. Deburring Scraper Blade Holders. Changeable-Blade Ratcheting Deburring Scrapers .

    Cushion Grip

    Knurled Grip

    Outer Tube

    Edge

    Replacement Blade Holders

    Scrapers for outer tube edges fit over the end of a tube to finish cut edges.
    Tools
    Replacement
    Handles
    Replacement
    Blade Holders
    Handle
    Grip
    Blade
    Lg.
    Material
    Style
    Texture
    Includes
    For Use On
    Overall Lg.
    Deburring
    Blade Mfr. No.
    Material
    Style
    Each
    Each
    Each
    4"AluminumPlainKnurledOne 5 1/2" Lg. Blade Holder
    One F26X Blade
    One Handle    		Steel, Aluminum, Copper, Brass, Iron, Plastic, Stainless Steel6" to 9"F26XSteelFixed3677N120000003677N610000003677N15000000
    4 5/8"PlasticCushion—One 5 1/2" Lg. Blade Holder
    One F26X Blade
    One Handle    		Steel, Aluminum, Copper, Brass, Iron, Plastic, Stainless Steel6 3/8" to 9 1/2"F26XSteelFixed3677N14000003677N6200003677N1500000
    Blades
    Image of Product. Long-Life Blades for Deburring Front Hole Edges. Front orientation. For Iron. Changeable-Blade Ratcheting Deburring Scrapers , Right-Hand Cutting Direction.
    Image of Product. Style E. Front orientation. Style E. Changeable-Blade Ratcheting Deburring Scrapers .
    Image of Product. Style G. Front orientation. Style G. Changeable-Blade Ratcheting Deburring Scrapers .

    Long-Life Blades

    for Deburring

    Front Hole Edges

    Style E

    Style G

    Overall
    Blade
    Each
    Style
    For Use On
    Deburring Blade
    Mfr. No.
    Lg.
    Dia.
    For Max.
    Tube OD
    For Max.
    Hole Dia.
    Material
    Style
    1-9
    10-Up
    Blades for Deburring Front Hole Edges
     
    Right-Hand Cutting Direction
    ESteel, Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless SteelC12, F121.13"0.5"—1/2"SteelFixed4289A23000000000000
    ESteel, Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless SteelC20, F201.13"0.75"—3/4"SteelFixed4289A240000000000
    ESteel, Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless SteelC30, F301.75"1.27"—1 3/16"SteelFixed4289A730000000000
     
    Long-Life Blades for Deburring Front Hole Edges
     
    Right-Hand Cutting Direction
    —Steel, Aluminum, Brass, Copper, Iron, Plastic, Stainless SteelC20T, F20P1.16"——3/4"Titanium Nitride (TiN)-Coated SteelFixed7227N1130000000000
    —Steel, Aluminum, Brass, Copper, Iron, Plastic, Stainless SteelF12P1.10"——1/2"Titanium Nitride (TiN)-Coated SteelFixed7227N1110000000000
    —Steel, Aluminum, Brass, Copper, Iron, Plastic, Stainless SteelF30P1.46"——1 3/16"Titanium Nitride (TiN)-Coated SteelFixed7227N1120000000000
     
    Blades for Deburring Outer Tube Edges
     
    Right-Hand Cutting Direction
    GSteel, Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless SteelF26X1.13"1.25"1"—SteelFixed4289A740000000000
     

    Deburring Blades

    Image of Product. Style G. Front orientation. Deburring Blades. Deburring Blades, For Deburring Outer Tube Edges, Style G.
    Image of Specification. Outer Tube Edge. Front orientation. For Deburring Outer Tube Edges. Deburring Blades.

    Style G

    Outer Tube

    Edge

    Choose from a range of blade shapes to scrape burs from flat surfaces to tube edges. Insert blades with a 0.1" dia. shank into a changeable-blade deburring scraper. For blades without a shank, they require a blade holder (sold separately); they are only for use with adjustable-length deburring scrapers, which secure the blade holder.
    For Deburring Outer Tube Edges
    Image of Product. Style G. Front orientation. Deburring Blades. Deburring Blades, For Deburring Outer Tube Edges, Style G.
    Image of Specification. Outer Tube Edge. Front orientation. For Deburring Outer Tube Edges. Deburring Blades.

    Style G

    Outer Tube

    Edge

    Blades
    Required
    Blade Holders
    Overall
    Blade
    Each
    Style
    For Use On
    Deburring
    Blade Mfr. No.
    Lg.
    Dia.
    For Max.
    Tube OD
    Material
    Style
    1-9
    10-Up
    Each
    Right-Hand Cutting Direction
    GSteel, Aluminum, Copper, Brass, Cast Iron, Stainless Steel, PlasticF26X1.13"1.25"1"SteelFixed4289A740000000000004289A3100000
     

    Deburring Tools for Rods

    Image of Product. Front orientation. Deburring Tools. Deburring Tools for Rods.
    Image of Specification. Front orientation. For Deburring Rod Ends. Deburring Tools for Rods.

    For

    Deburring

    Rod Ends

    Chamfer rod ends with your power drill to remove sharp burrs and prepare for threading. These tools also work on studs, tube, pipe, and conduit.
    Blade
    For OD
    For Pipe
    Size
    For EMT Conduit
    Trade Size
    Shank Type
    Hex Shank
    Size
    Material
    Style
    Angle
    Overall
    Lg.
    Body
    Material
    For Use On
    Each
    For Deburring Rod Ends, Outer Tube Edges, Outer Pipe Edges, and Outer Conduit Edges
    5/32" to 3/4"1/4 to 1/21/2
    		VersaDrive Hex7/16"CarbideFixed60°2 1/4"Zinc AlloySteel, Aluminum, Copper, Brass, Bronze, Iron, Plastic, Stainless Steel, Hardened Steel9723N11000000
    3/4" to 1 7/16"3/4 to 11 to 1 1/4VersaDrive Hex7/16"CarbideFixed60°2 1/2"Zinc AlloySteel, Aluminum, Copper, Brass, Bronze, Iron, Plastic, Stainless Steel, Hardened Steel9723N1200000
     
    back to top