How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Thick-Wall Plastic Pipe Fittings for Water
Connect these fittings to Schedule 80 pipe. With thicker, stronger walls than standard-wall fittings, they can handle heavy duty supply applications, such as water processing, wastewater treatment, and irrigation. Fittings are plastic for good corrosion resistance. They meet ASTM specifications and testing requirements for material quality.
Fittings for drinking water meet NSF/ANSI Standard 61.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
To prevent leaks in threaded connections, apply a sealant to the male threads. For plastic threads, apply a non-hardening, plastic-compatible sealant sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
- For Use With: Drinking Water, Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784, NSF/ANSI 61
- Pipe Nipples and Pipe: Use Schedule 80 PVC Plastic
- Flanges: Use Class 150 PVC Plastic
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through a wall, tank, or panel to create an inlet or outlet for faucets, pipes, and spigots.
| Pipe Size  | Socket Depth | For Hole Dia. | For Max. Wall Thick. | Material | Gasket Material | Color | Max. Pressure | Each | |
| 1/2 | 29/32" | 1 3/8" | 2 5/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 000000 |
| 3/4 | 1 1/64" | 1 5/8" | 2 5/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 | 1 9/64" | 1 7/8" | 2 5/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 1/4 | 1 17/64" | 2 21/32" | 2" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 1/2 | 1 25/64" | 2 21/32" | 2" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 2 | 1 33/64" | 3 1/4" | 2" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 3 | 1 57/64" | 4 1/2" | 2 1/8" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 4 | 2 17/64" | 5 3/4" | 2 29/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 000000 |
| 6 | 3 1/32" | 8 1/16" | 3 1/4" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 000000 |
- For Use With: Drinking Water, Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784, NSF/ANSI 61
- Pipe Nipples and Pipe: Use Schedule 80 PVC Plastic
- Flanges: Use Class 150 PVC Plastic
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through a wall, tank, or panel to create an inlet or outlet for faucets, pipes, and spigots.
| Pipe Size | For Hole Dia. | For Max. Wall Thick. | Material | Gasket Material | Color | Max. Pressure | Each | |
| 1/4 | 1 1/16" | 1/2" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 00000000 | 000000 |
| 3/8 | 1 3/16" | 1/2" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 00000000 | 00000 |
| 1/2 | 1 3/8" | 1 5/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1/2 | 1 3/8" | 2 5/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1/2 | 1 1/2" | 3/4" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 3/4 | 1 5/8" | 1 5/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 3/4 | 1 5/8" | 2 5/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 3/4 | 1 3/4" | 3/4" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 1 | 1 7/8" | 1 5/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 | 1 7/8" | 2 5/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 | 2" | 13/16" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 1 1/4 | 2 3/8" | 13/16" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 1 1/4 | 2 21/32" | 2" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 1/2 | 2 5/8" | 1" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 1/2 | 2 21/32" | 2" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 1/2 | 2 3/4" | 13/16" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 2 | 3 1/4" | 1" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 2 | 3 1/4" | 2" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 2 | 3 3/8" | 1 3/16" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 000000 |
| 3 | 4 1/2" | 2 1/8" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 3 | 4 5/8" | 2" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 000000 |
| 4 | 5 1/2" | 1 1/4" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 00000000 | 000000 |
| 4 | 5 3/4" | 2 29/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 000000 |
| 6 | 8" | 2 1/16" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 00000000 | 000000 |
| 6 | 8 1/16" | 3 1/4" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 000000 |
- For Use With: Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784
- Pipe Nipples and Pipe: Use Schedule 80 PVC Plastic
- Flanges: Use Class 150 PVC Plastic
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through a wall, tank, or panel to create an inlet or outlet for faucets, pipes, and spigots. Through-wall fittings with intermittent swivel are also known as self-aligning fittings; they rotate to compensate for misaligned and angled connections.
| Pipe Size | For Hole Dia. | For Max. Wall Thick. | Material | Gasket Material | Color | Max. Pressure | Each | |
NPT Threads | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/4 | 3 1/4" | 7/8" | PVC Plastic | EPDM Rubber | Light Gray | 70 psi @ 72° F | 0000000 | 0000000 |
| 1 | 3 1/4" | 1 1/2" | PVC Plastic | EPDM Rubber | Light Gray | 70 psi @ 72° F | 0000000 | 000000 |
| 1 1/2 | 4 1/2" | 11/16" | PVC Plastic | EPDM Rubber | Light Gray | 70 psi @ 72° F | 0000000 | 000000 |
| 2 | 4 1/2" | 1 1/8" | PVC Plastic | EPDM Rubber | Light Gray | 70 psi @ 72° F | 0000000 | 000000 |
| 3 | 5 3/4" | 1 11/16" | PVC Plastic | EPDM Rubber | Light Gray | 70 psi @ 72° F | 0000000 | 000000 |
- For Use With: Drinking Water, Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784, NSF/ANSI 61
- Pipe Nipples and Pipe: Use Schedule 80 PVC Plastic
- Flanges: Use Class 150 PVC Plastic
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through a wall, tank, or panel to create an inlet or outlet for faucets, pipes, and spigots.
| Pipe Size | Socket Depth | For Hole Dia. | For Max. Wall Thick. | Material | Gasket Material | Color | Max. Pressure | Each | |
NPT Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/4 | 5/8" | 1 1/16" | 1/2" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 00000000 | 000000 |
| 3/8 | 3/4" | 1 3/16" | 1/2" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 00000000 | 00000 |
| 1/2 | 29/32" | 1 3/8" | 2 5/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1/2 | 1 7/8" | 1 1/2" | 3/4" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 3/4 | 1" | 1 3/4" | 3/4" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 3/4 | 1 1/64" | 1 5/8" | 2 5/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 | 1 1/8" | 2" | 13/16" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 1 | 1 9/64" | 1 7/8" | 2 5/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 1/4 | 1 1/4" | 2 3/8" | 13/16" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 1 1/4 | 1 17/64" | 2 21/32" | 2" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 1/2 | 1 3/8" | 2 3/4" | 13/16" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 1 1/2 | 1 25/64" | 2 21/32" | 2" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 2 | 1 1/2" | 3 3/8" | 1 3/16" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 2 | 1 33/64" | 3 1/4" | 2" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 3 | 1 7/8" | 4 5/8" | 2" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 000000 |
| 3 | 1 57/64" | 4 1/2" | 2 1/8" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 4 | 2 1/4" | 5 1/2" | 1 1/4" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 000000 |
| 4 | 2 17/64" | 5 3/4" | 2 29/64" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 000000 |
| 6 | 3" | 8" | 2 1/16" | PVC Plastic | Neoprene Rubber | Dark Gray | 150 psi @ 72° F | 0000000 | 000000 |
| 6 | 3 1/32" | 8 1/16" | 3 1/4" | PVC Plastic | EPDM Rubber | Dark Gray | 150 psi @ 72° F | 000000000 | 000000 |
Standard-Wall Plastic Pipe Fittings for Water
Connect these fittings to Schedule 40 plastic pipe–they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.
To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
- For Use With: Water
- Maximum Temperature: 180° F
- Pipe Nipples and Pipe: Use Schedule 40 PVC Plastic
- Flanges: Use Class 150 PVC Plastic
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
| Pipe Size | Thread Size | For Hole Dia. | For Max. Wall Thick. | Material | Comparable To | Color | Max. Pressure | Each | |
NPT Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/16 | __ | 7/16" | 5/8" | Nylon Plastic | __ | White | 120 psi @ 72° F | 0000000 | 00000 |
| 1/16 | __ | 1/2" | 3/16" | Acetal Plastic | Delrin® Acetal Resin | White | 120 psi @ 72° F | 0000000 | 00000 |
| 1/8 | __ | 1/2" | 11/16" | Nylon Plastic | __ | White | 120 psi @ 72° F | 0000000 | 0000 |
| 1/8 | __ | 5/8" | 1/8" | Acetal Plastic | Delrin® Acetal Resin | Black | 120 psi @ 72° F | 0000000 | 00000 |
| 1/4 | __ | 5/8" | 11/16" | Nylon Plastic | __ | White | 120 psi @ 72° F | 0000000 | 00000 |
| 1/4 | __ | 3/4" | 1/4" | Acetal Plastic | Delrin® Acetal Resin | Black | 120 psi @ 72° F | 0000000 | 00000 |
| 3/8 | __ | 7/8" | 5/16" | Acetal Plastic | Delrin® Acetal Resin | Black | 120 psi @ 72° F | 0000000 | 00000 |
| 3/8 | __ | 1" | 3/4" | Nylon Plastic | __ | White | 120 psi @ 72° F | 0000000 | 00000 |
UNF Threads | |||||||||
| __ | 10-32 | 1/2" | 3/16" | Acetal Plastic | Delrin® Acetal Resin | White | 120 psi @ 72° F | 0000000 | 00000 |
| __ | 1/4"-28 | 1/2" | 3/16" | Acetal Plastic | Delrin® Acetal Resin | White | 120 psi @ 72° F | 0000000 | 00000 |
- For Use With: Water
- Maximum Temperature: 180° F
- Pipe Nipples and Pipe: Use Schedule 40 PVC Plastic
- Flanges: Use Class 150 PVC Plastic
Fittings with a compression end create a seal using a gasket and nut instead of cement or thread sealant, so they're quicker to install than socket-connect and threaded fittings. Insert the pipe and turn the end nuts until hand tight—the nuts compress the gasket against the pipe for a leak-resistant seal. This type of connection absorbs vibration and provides flexibility to reduce stress on your line.
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through a wall, tank, or panel to create an inlet or outlet for faucets, pipes, and spigots.
| Pipe Size | For Hole Dia. | For Max. Wall Thick. | Material | Gasket Material | Color | Each | |
| 1/2 | 2 3/16" | 3/8" | Polypropylene Plastic | TPR Rubber | Black | 0000000 | 000000 |
| 3/4 | 2 3/16" | 3/8" | Polypropylene Plastic | TPR Rubber | Black | 0000000 | 00000 |
| 1 | 2 3/16" | 3/8" | Polypropylene Plastic | TPR Rubber | Black | 0000000 | 00000 |
| 2 | 3 3/16" | 1/2" | Polypropylene Plastic | TPR Rubber | Black | 0000000 | 00000 |
| 3 | 4 7/16" | 3/4" | Polypropylene Plastic | TPR Rubber | Black | 0000000 | 00000 |
- For Use With: Water
- Maximum Temperature: 180° F
- Pipe Nipples and Pipe: Use Schedule 40 PVC Plastic
- Flanges: Use Class 150 PVC Plastic
Fittings with a compression end create a seal using a gasket and nut instead of cement or thread sealant, so they're quicker to install than socket-connect and threaded fittings. Insert the pipe and turn the end nuts until hand tight—the nuts compress the gasket against the pipe for a leak-resistant seal. This type of connection absorbs vibration and provides flexibility to reduce stress on your line.
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through a wall, tank, or panel to create an inlet or outlet for faucets, pipes, and spigots. Fittings for curved tanks are curved to fit the contour of a rounded tank.
| Pipe Size | For Hole Dia. | For Max. Wall Thick. | Material | Gasket Material | Color | Each | |
| 1/2 | 2 3/16" | 3/8" | Polypropylene Plastic | TPR Rubber | Black | 0000000 | 000000 |
| 3/4 | 2 3/16" | 3/8" | Polypropylene Plastic | TPR Rubber | Black | 0000000 | 00000 |
| 1 | 2 3/16" | 3/8" | Polypropylene Plastic | TPR Rubber | Black | 0000000 | 00000 |
| 2 | 3 3/16" | 1/2" | Polypropylene Plastic | TPR Rubber | Black | 0000000 | 00000 |
| 3 | 4 7/16" | 3/4" | Polypropylene Plastic | TPR Rubber | Black | 0000000 | 00000 |
CPVC Pipe Fittings for Hot Water
Made of CPVC, these fittings can handle high temperatures. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing and waste water treatment. They also have good corrosion resistance. These fittings are comparable to Corzan. Some meet ASTM D1784 specifications and testing requirements for material quality.
Fittings for drinking water meet NSF/ANSI Standard 61.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local regulatory limits on VOCs (Volatile Organic Compounds).
- For Use With:
Fittings with Neoprene Rubber Gaskets: Drinking Water, Water
All other fittings: Acetic Acid (10%), Calcium Chloride, Deionized Water, Hydrochloric Acid (25%), Phosphoric Acid, Salt Water, Sodium Hydroxide (50%), Sulfuric Acid (75%), Water - Maximum Temperature:
Fittings with Neoprene Rubber Gaskets: 200° F
All other fittings: 180° F - Specifications Met:
Fittings with Neoprene Rubber Gaskets: ASTM D1784, NSF/ANSI 61
All other fittings: ASTM D1784 - Pipe Nipples and Pipe: Use Schedule 80 CPVC Plastic
- Flanges: Use Class 150 CPVC Plastic
To prevent leaks in threaded connections, apply a non-hardening, plastic-compatible sealant to the male threads. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through a wall, tank, or panel to create an inlet or outlet for faucets, pipes, and spigots.
| Pipe Size | For Hole Dia. | For Max. Wall Thick. | Material | Gasket Material | Color | Max. Pressure | Each | |
NPT Threads | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4 | 1 1/16" | 1/2" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 00000000 | 000000 |
| 3/8 | 1 3/16" | 1/2" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 00000000 | 00000 |
| 1/2 | 1 3/8" | 2 1/16" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1/2 | 1 1/2" | 3/4" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 3/4 | 1 5/8" | 2 1/16" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 3/4 | 1 3/4" | 3/4" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 1 | 1 7/8" | 2 1/16" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 | 2" | 13/16" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 1 1/4 | 2 3/8" | 13/16" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 0000000 | 000000 |
| 1 1/4 | 2 21/32" | 2" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 2 5/8" | 2" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 1/2 | 2 3/4" | 13/16" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 0000000 | 000000 |
| 2 | 3 1/4" | 2" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 2 | 3 3/8" | 1 3/16" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 0000000 | 000000 |
| 3 | 4 1/2" | 2 1/8" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 00000000 | 000000 |
| 4 | 5 1/2" | 1 1/4" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 00000000 | 000000 |
| 4 | 5 3/4" | 3 1/4" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 00000000 | 000000 |
- For Use With:
Fittings with Neoprene Rubber Gaskets: Drinking Water, Water
All other fittings: Acetic Acid (10%), Calcium Chloride, Deionized Water, Hydrochloric Acid (25%), Phosphoric Acid, Salt Water, Sodium Hydroxide (50%), Sulfuric Acid (75%), Water - Maximum Temperature:
Fittings with Neoprene Rubber Gasket: 200° F
All other fittings: 180° F - Specifications Met:
Fittings with Neoprene Rubber Gaskets: ASTM D1784, NSF/ANSI 61
All other fittings: ASTM D1784 - Pipe Nipples and Pipe: Use Schedule 80 CPVC Plastic
- Flanges: Use Class 150 CPVC Plastic
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).
To prevent leaks in threaded connections, apply a non-hardening, plastic-compatible sealant to the male threads. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through a wall, tank, or panel to create an inlet or outlet for faucets, pipes, and spigots.
| Pipe Size | Socket Depth | For Hole Dia. | For Max. Wall Thick. | Material | Gasket Material | Color | Max. Pressure | Each | |
NPT Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/4 | 5/8" | 1 1/16" | 1/2" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 00000000 | 000000 |
| 3/8 | 3/4" | 1 3/16" | 1/2" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 00000000 | 00000 |
| 1/2 | 7/8" | 1 1/2" | 3/4" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 1/2 | 29/32" | 1 3/8" | 2 1/16" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 3/4 | 1" | 1 3/4" | 3/4" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 3/4 | 1 1/64" | 1 5/8" | 2 1/16" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 | 1 1/8" | 2" | 13/16" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 1 | 1 9/64" | 1 7/8" | 2 1/16" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 1/4 | 1 17/64" | 2 5/8" | 2" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 1/2 | 1 17/64" | 2 5/8" | 2" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 1 1/2 | 1 3/8" | 2 3/4" | 13/16" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 2 | 1 25/64" | 3 1/4" | 2" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 000000000 | 00000 |
| 2 | 1 1/2" | 3 3/8" | 1 3/16" | CPVC Plastic | Neoprene Rubber | Light Gray | 150 psi @ 72° F | 0000000 | 000000 |
| 3 | 1 57/64" | 4 1/2" | 2 1/8" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 000000000 | 000000 |
| 4 | 2 17/64" | 5 3/4" | 2 7/16" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 000000000 | 000000 |
| 6 | 3 1/32" | 8 1/16" | 3 1/4" | CPVC Plastic | EPDM Rubber | Light Gray | 150 psi @ 72° F | 000000000 | 000000 |
Brass Quick-Disconnect Tube Couplings for Air
- Temperature Range: 0° to 180° F
- Tubing: Use with hard polyethylene plastic or polypropylene plastic
An all-brass body gives these quick-disconnect couplings better durability than plastic quick-disconnect couplings. They’re nickel plated for very good corrosion resistance. Couplings consist of a plug and a socket that join with a latch, so you can easily connect and disconnect your line. To connect, insert the plug into the socket; to disconnect, press the latch and remove the plug.
Plugs and sockets with shut-off have a valve to stop the flow when the coupling is separated, so air won’t leak from your line.
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
Through-wall sockets are also known as bulkhead sockets and panel mount sockets; they mount through your wall or panel to create an inlet or outlet.