About Backflow-Prevention Valves
More
Threaded Check Valves for Harsh Chemicals
These valves open to allow flow in one direction and close when flow stops or reverses.
Polypropylene valves are more corrosion resistant than PVC or CPVC valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- For Use With: Air, Ammonia, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Sodium Hydroxide, Toluene, Water, Xylene
- Ball Material: 316 Stainless Steel
- Spring Material: 316 Stainless Steel
- Seal Material: Fluoroelastomer Rubber
Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Min. Opening Pressure, psi | Temperature Range, °F | Color | End-to-End Lg. | Each | |
NPT Male × NPT Male | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/8 | Not Rated | 220 psi @ 70° F | 2.5 | 40° to 180° | White | 1" | 00000000 | 000000 |
| 1/4 | Not Rated | 220 psi @ 70° F | 2.5 | 40° to 180° | White | 1 7/16" | 00000000 | 00000 |
| 3/8 | Not Rated | 220 psi @ 70° F | 2.5 | 40° to 180° | White | 1 1/2" | 00000000 | 00000 |
| 1/2 | Not Rated | 220 psi @ 70° F | 2.5 | 40° to 180° | White | 1 13/16" | 00000000 | 00000 |
Check Valves with Push-to-Connect Fittings for Harsh Chemicals
- For Use With: Air, Argon, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Krypton, Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Toluene, Water, Xenon, Xylene
- Piston Material: PVDF Plastic
- Spring Material: Stainless Steel
- Seal Material: Fluoroelastomer Rubber
Connect your inlet tubing into the push-to-connect fittings—no heat, solder, or flux required. These valves have a PVDF body and a fluoroelastomer seal for excellent chemical resistance. They open to allow flow in one direction and close when flow stops or reverses.
| For Tube OD | Pipe Size | Max. Pressure | Min. Opening Pressure, psi | Temperature Range, °F | Color | End-to-End Lg. | Each | |
PVDF Plastic Body | ||||||||
|---|---|---|---|---|---|---|---|---|
Push-to-Connect Inlet × NPTF Male Outlet | ||||||||
| 3/8" | 1/4 | 300 psi @ 70° F | 0.5 | 0° to 250° | Black | 1 3/8" | 0000000 | 000000 |
Check Valves with Barbed Fittings for Harsh Chemicals
Prevent backflow in chemical tubing lines. These valves have barbed fittings that grip onto tubing, providing a secure hold. The plastic body and fluoroelastomer seal provide excellent chemical resistance. Valves open to allow flow in one direction and close when flow stops or reverses.
PVDF valve resists abrasion and UV light.
- For Use With: Air, Butane, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Hydrochloric Acid, Nitric Acid, Oil, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water
- Diaphragm Material: Fluoroelastomer Rubber
- Seal Material: Fluoroelastomer Rubber
| For Tube ID | Max. Pressure | Min. Opening Pressure, psi | Temperature Range, °F | Color | End-to-End Lg. | Each | |
Barbed × Barbed | |||||||
|---|---|---|---|---|---|---|---|
| 1/4" | 15 psi @ 70° F | 0.5 | -20° to 250° | White | 1 21/32" | 00000000 | 00000 |