Keep your work site safe and clutter free–this coiled tubing extends when you need it and retracts out of the way when you don't.

This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.

Safely power seat controls, horns, and other vehicle parts with compressed air.

With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.

Keep your work area tidy with this coiled tubing that extends when you need it and retracts out of the way when you don’t.

Ultraviolet light won’t cause this tubing to degrade or deteriorate.

Strong, hard walls give this tubing extra support in high-pressure and vacuum applications.

Tubing meets NSF/ANSI Standard 61 for drinking water.

Polished to a 10 Ra finish on the inside, this tubing has the smoothest interior of any tubing we offer. It is commonly used in semiconductor applications.

Take samples in sanitary environments—these tube fittings won’t contaminate your lines or force you to pause them.

Color-code your lines by snapping these rings over the release ring on push-to-connect fittings.

Made of nickel-plated brass, these tube fittings resist corrosion better than plain brass fittings. The male threaded ends connect to NPT, NPTF, BSPP, BSPT, and other universal threads, so you don’t have to bother matching exact thread types.

Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications.

Connect high-pressure brake lines with fittings that won’t crack in frigid temperatures. Often used on commercial trucks and trailers, these fittings meet Department of Transportation FMVSS 571 safety standards.

Color-code your lines by snapping these rings over the release ring on low-temperature D.O.T. push-to-connect tube fittings.

Designed for use in welding applications, these fittings are flame retardant.

Ball bearings allow these fittings to rotate 360°, even after they are tightened. They have a special seal that reduces friction to allow for continuous rotation.

Made of stainless steel, these couplings stand up to wet environments.

A built-in shut-off valve stops the flow when the coupling is separated, so there’s no need to worry about air or water spilling from your line. Couplings are plastic, which is lighter in weight than metal couplings.

Made of brass, these couplings are more durable than plastic couplings.

With no latch, these couplings have a compact design to fit in small spaces. They can handle pressures up to 700 psi.

Made of brass, these fittings withstand frequent washdowns in food-processing applications. They also adhere to NSF/ANSI safety standards, so they’re safe to use with food, beverages, and dairy.

These quick-disconnect couplings mate with a sanitary stainless steel quick-clamp fitting for use in dairy lines.

Fittings are 316 stainless steel, which has excellent chemical resistance and is more durable than plastic.

Tube supports slip inside tubing to prevent the walls from collapsing.

Fittings can withstand temperatures up to 200° F.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Also known as I-line fittings, these fittings have a male adapter that interlocks with a female adapter for more support than standard quick-clamp fittings.

Also known as KF, QF, and NW fittings, these fittings are for high-vacuum applications, such as vacuum coating and heat treating, leak testing, and analyzing gases.

Use these rings with quick-clamp high-vacuum fittings.

Twist these fittings onto high-vacuum tubing to quickly make sealed, high-vacuum connections without the need for clamping, welding, or tools.

Also known as luer lock couplings, these consist of a plug and socket that connect with a half turn. Use in low-pressure applications up to 30 psi.

Made of plastic, these fittings are lightweight compared to our brass push-to-connect fittings.

For use in high-vacuum systems, these fittings use a metal reinforced O-ring to create an airtight seal. Also known as KF, QF, and NW fittings, they’re used for high-vacuum applications such as vacuum coating and heat treating, leak testing, and analyzing gases.

Transport milk, syrup, meat, and other wet food and beverages through your line.

Made of platinum-cured silicone, this hose stays strong and flexible across a wide temperature range. Use it with juice, meat, milk, poultry, and syrup.

An EPDM cover guards this hose, so it won't tear if scraped or break down from ozone or UV light. Use it to move milk, syrup, meat, and other wet and food and beverages.

Blended with Buna-N, this hose remains flexible and won’t break down from oily or fatty food and beverages.

Transport wet food and drink at high pressures with a hose connected by sanitary fittings.

For frequent connections, this hose has a socket end that's faster to connect and disconnect than a threaded fitting. Thanks to two layers of blended rubber, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose.

When you need access to your line, don’t waste time threading and unthreading your fittings. This hose has a quick-disconnect fitting on both ends. It bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose.

Connect to high-vacuum pumps to route exhaust fumes out of your work area. Also known as roughing hose.

Sealed vacuum insulation and a reflective barrier inside this hose maintains the temperature of liquids as cold as -325° F. Similar to a thermos, this prevents heat transfer, so the exterior of the hose won’t freeze or form condensation. The tube stems on each end slide into tube fittings on a freezer or other equipment in your plant or laboratory.

Couplings allow for maximum flow because there's no shut-off valve in the plug or the socket. Compatible with Open-Flow-shape plugs and sockets.

Also known as automotive couplings. Compatible with Tru-Flate-shape plugs and sockets.

Made of acetal, these couplings are lighter in weight than metal quick-disconnect couplings. Compatible with Plastic-shape plugs and sockets.

Sockets accommodate five common plug shapes: Industrial, ARO, Lincoln, Tru-Flate, and European.

Plugs and sockets are color coded by shape so you can't mix hose lines. Only plugs and sockets of the same color will fit together.

Compatible with Ring-Lock-shape plugs and sockets.

Compatible with Japanese-shape plugs and sockets.

To minimize fluid loss when connecting and disconnecting your line, these couplings have flat faces for a close fit and shut-off valves to stop the flow—they meet ISO 16028, which is an international standard for hose couplings.

These couplings consist of a plug and socket that connect and disconnect quickly. Use them if you need to frequently link and unlink welding hoses, torches, and regulators. They are also known as CGA couplings.

Use these couplings at pressures up to 10,000 psi. Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close together, reducing fluid loss when connecting and disconnecting the line. They are compatible with High-Pressure Minimal-Spill-shape plugs and sockets.

Use these couplings at pressures up to 6,500 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Snap-Tite H-Shape plugs and sockets.

Ideal for lines with rapid changes in pressure and flow, these couplings have threads that lock them together. They connect more securely than push-to-connect couplings, whose bearings wear out in high-impulse conditions.

Use these couplings at pressures up to 5,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with International Standard ISO A-shape plugs and sockets.

Use these couplings at pressures up to 5,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with International Standard ISO B-shape plugs and sockets.

Reduce the risk of spills near electronics when connecting and disconnecting liquid cooling lines. Also known as double shut-off couplings, these couplings have a shut-off valve on both sides that stops the flow of coolant if they’re separated.

These couplings are compatible with International Standard ISO Series B-shape plugs and sockets. They are FDA compliant, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly so you can frequently access your line. Use at pressures up to 220 psi.

Use these couplings when you need frequent access to a gas line. A complete coupling consists of a plug and a socket that connect and disconnect quickly.

Twist these fittings onto aluminum pipe for quick, sealed connections—no threading, soldering, or welding necessary. Use them to build a compressed air system in half the time it would take to build a copper or steel system.

Also known as manifold flange fittings, these have a clamp-together design that lets you access your line for routine maintenance. Fittings resist acids, solvents, and other harsh chemicals. They won’t deteriorate when exposed to the damaging effects of ultraviolet light, so they’re suitable for outdoor use.

Used in food, beverage, and dairy systems that require frequent cleaning, these valves are FDA compliant for direct food contact. Electropolished to a 20 Ra finish, they have smooth internal surfaces that prevent product buildup and inhibit bacteria growth. All have sanitary quick-clamp fittings for easy disassembly. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control.

Also known as vacuum isolation valves, these block flow so you can install and remove gauges from your system. They can also be used to add or vent gases in high-vacuum systems.

To maintain sanitary standards in food, beverage, and dairy systems that require frequent cleaning, these valves are made of FDA compliant materials. Polished to a 32 Ra finish, they have smooth internal surfaces that prevent product buildup and inhibit bacteria growth. All have sanitary quick-clamp fittings for easy disassembly.

Use air pressure to automatically control the flow of liquids in sanitary environments, such as food and beverage processing plants.

For food and beverage systems that require frequent cleaning, these valves have polished internal surfaces and sanitary quick-clamp connections for easy disassembly.

Keep clean, breathable air flowing from a respirator air supply hose to your hood or helmet by replacing worn or damaged breathing tubes.