Sockets accommodate five common plug shapes: Industrial, ARO, Lincoln, Tru-Flate, and European.

Kits contain Industrial quick-disconnect plugs in four coupling sizes so you can determine the size of your couplings without needing to measure.

Also known as automotive couplings. Compatible with Tru-Flate-shape plugs and sockets.

Compatible with Schrader-shape plugs and sockets.

Plugs and sockets are color coded by shape so you can't mix hose lines. Only plugs and sockets of the same color will fit together.

A slim body allows these couplings to fit into tight spaces. Compatible with Compact-shape plugs and sockets.

Compatible with Japanese-shape plugs and sockets.

Made of acetal, these couplings are lighter in weight than metal quick-disconnect couplings. Compatible with Plastic-shape plugs and sockets.

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

Use these couplings at pressures up to 5,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with International Standard ISO B-shape plugs and sockets.

Use these couplings at pressures up to 3,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Pioneer-shape plugs and sockets.

Use these couplings at pressures up to 10,000 psi. Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close together, reducing fluid loss when connecting and disconnecting the line. They are compatible with High-Pressure Minimal-Spill-shape plugs and sockets.

Add quick connection points for mechanical gauges and other diagnostic equipment to your line. These couplings are also known as test ports and diagnostic couplings.

Made of brass with a steel wing nut, these couplings are tough enough to handle occasional drops to concrete and frequent connections on dump truck, oil rigs, and other heavy duty equipment. Compared to push-to-connect couplings, these are threaded, so they're easier to connect when there's pressure in your line.

Reduce the risk of spills near electronics when connecting and disconnecting liquid cooling lines. Also known as double shut-off couplings, these couplings have a shut-off valve on both sides that stops the flow of coolant if they’re separated.

These couplings are compatible with International Standard ISO Series B-shape plugs and sockets. They are FDA compliant, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly so you can frequently access your line. Use at pressures up to 220 psi.

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Couplings consist of a plug and a socket that connect more quickly than threaded garden hose couplings. To connect, push the plug into the socket. The compact design makes these couplings sleeker and easier to handle than cam-and-groove garden hose couplings.

Often used for loading and unloading gas tankers, these couplings are tough enough to handle frequent connections and designed to be virtually spill-free.

Made of ductile iron, these couplings are tough enough to handle sand, cement, and other abrasive solids and slurries. Use their cam-and-groove fittings to quickly connect and disconnect medium- to large-diameter hose lines.

Minimize chemical and petroleum spills during accidental disconnects, such as a driver pulling away during loading. These couplings have a shut-off valve on each half to stop flow when they’re separated.

Also known as dry disconnects and double shut-off couplings, these couplings make connecting and disconnecting your line quick and virtually spill-free. Built to stand up to petroleum products, such as diesel fuel and gasoline, their body and gasket are made from materials that won’t corrode from oil.

Lighter in weight than their metal counterparts, these quick-disconnect couplings are made of acetal plastic. They are moisture resistant, so they won’t absorb water and lose strength, even in high-humidity environments.

Not only are these chrome-plated brass couplings corrosion resistant, they’re also durable enough to handle pressures up to 250 psi and can be used with vacuum.

Don’t get your lines crossed—use one of these couplings to quickly connect or disconnect multiple tubes at once.

Prevent mixing the wrong high-pressure lines—these couplings are designed to only connect with a plug or socket of the same color.

A built-in shut-off valve stops the flow when you separate these couplings, so air or water won’t leak from your line. Made of nylon, these couplings are lightweight and have good impact and abrasion resistance.

Quickly connect low-pressure air lines with these luer lock couplings. Made of brass, they are stronger and more durable than plastic tube couplings.

These quick-disconnect couplings meet NSF/ANSI 169 for food equipment.

Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line.

A staple in labs, these couplings are highly versatile, fitting any luer lock plug, socket, syringe, or needle. They’re PVDF, so they resist most acids, alcohols, and organic solvents.

Quickly connect low-pressure stainless steel lines with these couplings. Made of 316 stainless steel, they have excellent corrosion resistance.

For use in high-vacuum systems, these fittings use a metal reinforced O-ring to create an airtight seal. Also known as KF, QF, and NW fittings, they’re used for high-vacuum applications such as vacuum coating and heat treating, leak testing, and analyzing gases.

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.