Hydraulic Bottle Jacks
Use these versatile jacks for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
Capacity | Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | ||
| A | 2 | 4,000 | 6 1/4"-12 1/8" | 5 7/8" | 7/8" | 2 7/8" | 3 1/2" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 4 | 8,000 | 6 3/4"-13" | 6 1/4" | 1 1/8" | 3 1/2" | 4" | 12" | Steel | Removable Handle | 0000000 | 00000 |
| A | 6 | 12,000 | 7 7/8"-15 1/8" | 7 1/4" | 1" | 3 7/8" | 4 3/8" | 12" | Steel | Removable Handle | 0000000 | 00000 |
| A | 8 | 16,000 | 7 7/8"-15 1/8" | 7 1/4" | 1 1/2" | 4" | 4 5/8" | 12" | Steel | Removable Handle | 0000000 | 00000 |
| A | 12 | 24,000 | 7 1/8"-12 3/8" | 5 3/8" | 1 5/8" | 4 3/4" | 5 1/4" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 12 | 24,000 | 8 5/8"-15 7/8" | 7 1/4" | 1 5/8" | 4 3/4" | 5 1/4" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 20 | 40,000 | 7 7/8"-14 1/8" | 6 1/4" | 2 1/4" | 5 5/8" | 6 1/8" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 20 | 40,000 | 9 5/8"-17 3/4" | 8 1/8" | 2 1/4" | 5 5/8" | 6 1/8" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 30 | 60,000 | 9 7/8"-16 7/8" | 7 1/8" | 2 1/4" | 6 3/4" | 6 7/8" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| B | 6 | 12,000 | 8 1/2"-20 1/2" | 12" | 1 3/4" | 4 3/4" | 5 1/4" | 27 5/8" | Steel | Removable Handle | 000000 | 000000 |
| B | 13 | 26,000 | 9 1/8"-22 1/2" | 13 3/8" | 1 7/8" | 7" | 7 3/8" | 27 5/8" | Steel | Removable Handle | 000000 | 000000 |
Foot-Operated Tall-Body Hydraulic Bottle Jacks
Jacks are equipped with two foot pedals for hands-free use, one to raise the ram and another to lower it. Twice as tall as standard jacks, they save you time pumping. Use them for lifting, spreading, bending, pushing, and straightening.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Hand-Operated Tall-Body Hydraulic Bottle Jacks
Save time pumping with jacks that are twice as tall as standard bottle jacks. Use them for lifting, spreading, bending, pushing, and straightening. Secure equipment to the ram through a mounting hole on the ram’s tip.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Wd. | Lg. | Handle Lg. | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Features | Each | |
| 1 1/2 | 3,000 | 25 5/8"-43 5/8" | 18" | 7/8" | 4 1/2" | 5 7/8" | 20" | Steel | __ | __ | __ | Removable Handle | 0000000 | 0000000 |
| 3 | 6,000 | 20 3/8"-35 1/2" | 15 1/8" | 1 3/16" | 4 3/8" | 5 7/8" | 20" | Steel | No | 2 | 5/16" | Removable Handle | 0000000 | 000000 |
| 5 | 10,000 | 20 1/8"-36 5/8" | 16 1/2" | 1 3/8" | 4 5/8" | 6 1/4" | 20" | Steel | No | 2 | 3/8" | Removable Handle | 0000000 | 000000 |
| 8 | 16,000 | 30 13/16"-53 13/16" | 23" | 1 5/8" | 5 1/8" | 6 1/2" | 20" | Steel | __ | __ | __ | Removable Handle | 0000000 | 000000 |
Low-Profile Hydraulic Bottle Jacks
These jacks have a short body to fit in low-clearance spaces. Jacks with a low-profile handle pump from side to side, requiring less vertical space than other bottle jacks. Use them for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Height | Maximum Lift | Ram OD | Dia. | Lg. | Wd. | Handle Length | Body Material | Features | Each | |
| 5 | 10,000 | 2 1/2"-3 1/4" | 3/4" | 1 1/8" | 3" | __ | __ | 9 1/2" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 0000000 |
| 5 | 10,000 | 3 1/2"-5" | 1 1/2" | 1 1/8" | 3" | __ | __ | 9 1/2" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 |
| 10 | 20,000 | 4 3/4"-6" | 1 3/16" | 1 5/8" | 4 3/8" | __ | __ | 17 3/8" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 |
| 20 | 40,000 | 5 1/8"-6 3/8" | 1 3/16" | 2 1/8" | 4 3/4" | __ | __ | 23 7/8" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 |
| 30 | 60,000 | 7 1/4"-10 1/4" | 3 1/8" | 2 3/8" | __ | 7 5/8" | 5 5/8" | 39 3/8" | Steel | Removable Handle | 0000000 | 000000 |
Heavy Duty Hydraulic Bottle Jacks
With fewer moving parts than standard bottle jacks, these are made for frequent use. The ram body screws onto the base so that it can be opened for inspection and repair. The ram is nickel-plated for corrosion resistance. Jacks can be used for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Wd. | Lg. | Handle Lg. | Body Material | Features | Each | |
| 3 | 6,000 | 8 1/2"-17 3/8" | 8 1/2" | 7/8" | 4 1/2" | 5 7/8" | 21" | Steel | Removable Handle | 0000000 | 0000000 |
| 3 | 6,000 | 10 1/4"-20 1/2" | 10 1/4" | 1 1/4" | 4 1/4" | 5 7/8" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 5 | 10,000 | 8 5/8"-17 5/8" | 9" | 1 1/4" | 4 3/4" | 6 1/4" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 5 | 10,000 | 10 1/4"-22" | 11 3/4" | 1 3/8" | 4 5/8" | 6 1/4" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 8 | 16,000 | 9 1/8"-19 1/2" | 10 1/8" | 1 3/8" | 5 1/4" | 6 1/2" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 8 | 16,000 | 11"-23 1/2" | 12 1/2" | 1 5/8" | 5 1/8" | 6 1/2" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 12 | 24,000 | 9"-19 1/2" | 10 1/2" | 1 5/8" | 5 3/4" | 6 3/4" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 20 | 40,000 | 11"-17 1/2" | 6 1/2" | 1 7/8" | 6 7/8" | 6 3/4" | 30 3/4" | Steel | Removable Handle | 0000000 | 000000 |
| 30 | 60,000 | 11 1/8"-18 1/8" | 7" | 2 1/8" | 7" | 5 1/2" | 30 3/4" | Steel | Removable Handle | 0000000 | 000000 |
| 60 | 120,000 | 12"-18 5/8" | 6 5/8" | 3 1/8" | 7 1/2" | 9 3/8" | 39 1/2" | Steel | Removable Handle | 000000 | 00000000 |
Hydraulic Jacks
Lift in tight spaces where a bottle jack won't fit. Jacks include a ram, a hand pump with hydraulic oil, a pressure gauge, and a hydraulic hose. For vertical use, the pump head (where the handle meets the pump) must be pointed down.
Jacks with ram center hole have an unthreaded hole for attaching a threaded rod so you can use them in pulling applications.
Rams with collar threads are threaded at the top for mounting in a fixture or with a mounting plate (sold separately; see Mounting Plates for Hydraulic Jacks).
Warning: Never use to support people or loads over people.
Capacity | Ram | Pump | Mounting | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Max. Pressure, psi | OD | Center Hole Dia. | Collar Thread Size  | Oil Capacity, cu. in. | Lg. | Wd. | Ht. | Oil Capacity, cu. in. | Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 5 | 10,000 | 1 5/8"-2 1/4" | 5/8" | 10,000 | 2 5/8" | __ | __ | 0.6 | 14 1/4" | 5" | 5 1/8" | 20 | Steel | No | 2 | 1/4" | 0000000 | 000000000 |
| 5 | 10,000 | 4 3/8"-5 1/2" | 1 1/8" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 1 | 14 1/4" | 5" | 5 1/8" | 20 | Steel | No | 2 | 1/4" | 0000000 | 00000000 |
| 5 | 10,000 | 6 5/8"-9 3/4" | 3 1/8" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 3 | 14 1/4" | 5" | 5 1/8" | 20 | Steel | No | 2 | 1/4" | 0000000 | 00000000 |
| 5 | 10,000 | 8 1/2"-13 1/2" | 5" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 5 | 13 1/4" | 3 3/4" | 5 5/8" | 20 | Aluminum | No | 2 | 1/4" | 0000000 | 00000000 |
| 5 | 10,000 | 8 1/2"-13 5/8" | 5 1/8" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 5 | 14 1/4" | 5 1/8" | 5" | 20 | Steel | No | 2 | 1/4" | 0000000 | 00000000 |
| 5 | 10,000 | 10 3/4"-17 7/8" | 7 1/8" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 12.6 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 10 | 20,000 | 4 3/4"-6 7/8" | 2 1/8" | 10,000 | 2 1/4" | __ | 2 1/4"-14 | 4.8 | 21" | 4 3/4" | 7" | 55 | Aluminum | No | 2 | 1/4" | 0000000 | 00000000 |
| 10 | 20,000 | 4 7/8"-7" | 2 1/8" | 10,000 | 2 1/4" | __ | 2 1/4"-14 | 4.2 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 10 | 20,000 | 9 3/4"-15 3/4" | 6" | 10,000 | 2 1/4" | __ | 2 1/4"-14 | 13.7 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 10 | 20,000 | 9 3/4"-15 7/8" | 6 1/8" | 10,000 | 2 1/4" | __ | 2 1/4"-14 | 13.7 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
| 12 | 24,000 | 7 1/4"-10 1/4" | 3" | 10,000 | 2 3/4" | 3/4" | 2 3/4"-16 | 8.3 | 25 5/8" | 5 3/8" | 5 3/4" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 25 | 50,000 | 10 3/4"-16 7/8" | 6 1/8" | 10,000 | 3 1/2" | __ | 3 5/16"-12 | 32.2 | 20 3/4" | 5 3/4" | 6 7/8" | 134 | Steel | No | 2 | 5/16" | 0000000 | 00000000 |
| 25 | 50,000 | 10 3/4"-17" | 6 1/4" | 10,000 | 3 3/8" | __ | 3 5/16"-12 | 32.2 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
| 30 | 60,000 | 4 5/8"-7" | 2 3/8" | 10,000 | 4" | __ | __ | 15.8 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
| 30 | 60,000 | 4 5/8"-7" | 2 3/8" | 10,000 | 4" | __ | __ | 15.8 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 30 | 60,000 | 7 1/8"-9 5/8" | 2 1/2" | 10,000 | 4 1/2" | 1 1/4" | 4 1/2"-12 | 18 | 25 5/8" | 5 3/8" | 5 3/4" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 50 | 100,000 | 4 7/8"-7 1/4" | 2 3/8" | 10,000 | 4 7/8" | __ | __ | 22.9 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
| 55 | 110,000 | 11 1/8"-17 1/4" | 6 1/8" | 10,000 | 5" | __ | 5"-12 | 69 | 20 3/4" | 5 3/4" | 6 7/8" | 134 | Steel | No | 2 | 5/16" | 0000000 | 00000000 |
| 100 | 200,000 | 5 5/8"-7 5/8" | 2" | 10,000 | 6 1/2" | __ | __ | 44.2 | 20 3/4" | 5 3/4" | 6 7/8" | 134 | Steel | No | 2 | 5/16" | 0000000 | 00000000 |
Hydraulic Jacks with Extenders and Pryers
Lift in tight spaces where a bottle jack won't fit. These jacks include extensions for increasing lift height and accessories for prying. For vertical use, the pump head (where the handle meets the pump) must be pointed down.
Note: When ram extenders or accessories are used, the rated capacity is reduced by 50% for each extender and accessory connected.
Warning: Never use to support people or loads over people.
Pump | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Max. Lift | Max. Pressure, psi | Ram OD | Lg. | Wd. | Ht. | Includes | Each | |
4 tons / 8,000 lbs. Capacity | |||||||||
| 10 3/4"-15 5/8" | 4 7/8" | 8,000 | 1 1/2" | 12 7/8" | 5 3/4" | 5 1/8" | Pushing Accessories (Rubber Head, Multi-Point Head, and Serrated Saddle) Prying Accessories (Hydraulic Wedge, Plunger Toe, Ram Toe, and Wedge Head) Five Ram Extenders (3", 6 1/8", 8 1/2", 16 1/2", and 19 1/2" lengths) Hose Male Connector Stabilizing Base Plastic Case | 000000 | 0000000 |
| 10 1/8"-14 7/8" | 4 3/4" | 7,000 | 2" | 14 3/4" | 4 1/2" | 5" | Pushing Accessories (Rubber Head, Multi-Point Head, and Serrated Saddle) Prying Accessories (Hydraulic Wedge, Plunger Toe, Ram Toe, and Wedge Head) Pulling Accessories (Two Chains with Hooks, Chain Pull Plate, and Clamp Head) Six Ram Extenders (3", 6", and 18", and three 15" lengths) Three Ram Extender Connectors Four Locking Pins Hose Male Connector Male and Female Adapters Stabilizing Base Metal Case | 0000000 | 00000000 |
10 tons / 20,000 lbs. Capacity | |||||||||
| 13 3/4"-19 3/4" | 6" | 10,000 | 2 1/8" | 20 3/8" | 5 3/4" | 5 1/8" | Pushing Accessories (Rubber Head, Multi-Point Head, and Serrated Saddle) Prying Accessories (Hydraulic Wedge, Plunger Toe, Ram Toe, and Wedge Head) Hose Male Connector Stabilizing Base Plastic Case Four Ram Extenders (4", 10", 18", and 27" lengths) | 000000 | 000000 |
| 12 3/8"-18 1/4" | 5 7/8" | 10,000 | 2 1/2" | 20" | 5 7/8" | 5 1/2" | Pushing Accessories (Rubber Head, Multi-Point Head, and Serrated Saddle) Prying Accessories (Hydraulic Wedge, Plunger Toe, Ram Toe, and Wedge Head) Pulling Accessories (Two Chains with Hooks, Chain Pull Plate, and Clamp Head) Four Ram Extenders (6", 12", 15", and 18" lengths) Two Ram Extender Connectors Four Locking Pins Hose Male Connector Male and Female Adapters Stabilizing Base Metal Case | 0000000 | 00000000 |
Rams for Hydraulic Jacks
Push or pry apart material with these rams by attaching them to a hydraulic pump. Use hose to connect the ram to a pump; add a pressure gauge to monitor hydraulic oil pressure levels and guard against overload.
Style A rams are wedge-shaped to squeeze into tight spaces to pry, lift, and spread.
Style B-D rams lift or push material. Style B rams have a lower profile than Style C rams. Style D rams have an unthreaded hole through the center that can be used to create a pulling action. Run a threaded rod through the bottom of the ram and fasten or weld the rod to the material you are trying to pull. Often used to free stuck parts.
Rams with collar threads are threaded at the top of the ram for mounting in a fixture or with a mounting plate (sold separately; see Mounting Plates for Hydraulic Jacks).
For technical drawings and 3-D models, click on a part number.
Capacity | Mounting | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | tons | lbs. | Ht. | Max. Lift | Ram Oil Capacity, cu. in. | Dia. | Lg. | Wd. | Ram Collar Thread Size | Ram Center Hole Dia. | Max. Pressure, psi | Pipe Size | Thread Type | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| A | 1 | 2,000 | 1/2"-4 1/4" | 3 3/4" | 0.7 | __ | 6 1/2" | 2 1/4" | __ | __ | 8,000 | 3/8 | NPTF | __ | __ | __ | 0000000 | 0000000 |
| A | 1 | 2,000 | 1 3/8"-13 1/8" | 11 3/4" | 3.4 | __ | 21" | 2 3/8" | __ | __ | 8,000 | 3/8 | NPTF | __ | __ | __ | 0000000 | 00000000 |
| B | 5 | 10,000 | 1 3/8"-1 5/8" | 1/4" | 0.2 | __ | 2 9/16" | 1 3/4" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/16" | 0000000 | 000000 |
| B | 5 | 10,000 | 1 3/4"-2 1/4" | 1/2" | 0.6 | __ | 2 9/16" | 1 3/4" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/16" | 000000 | 000000 |
| B | 10 | 20,000 | 1 3/4"-2 1/4" | 1/2" | 0.9 | __ | 3 1/4" | 2 3/16" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| B | 20 | 40,000 | 2 1/8"-2 5/8" | 1/2" | 2 | __ | 4" | 3" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 000000 | 000000 |
| B | 30 | 60,000 | 2 1/4"-2 3/4" | 1/2" | 3.2 | __ | 4 1/2" | 3 3/4" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 00000000 |
| B | 50 | 100,000 | 2 5/8"-3 1/8" | 1/2" | 6.9 | __ | 5 1/2" | 5" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 00000000 |
| C | 5 | 10,000 | 4 3/8"-5 1/2" | 1 1/8" | 0.9 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 000000 | 000000 |
| C | 5 | 10,000 | 6 5/8"-9 3/4" | 3 1/8" | 2.9 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| C | 5 | 10,000 | 8 1/2"-13 5/8" | 5 1/8" | 5 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| C | 5 | 10,000 | 10 3/4"-17 7/8" | 7 1/8" | 7 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| C | 5 | 10,000 | 12 7/8"-22" | 9 1/8" | 9.1 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| C | 10 | 20,000 | 3 1/2"-5" | 1 1/2" | 3.4 | 2 3/4" | __ | __ | __ | __ | 10,000 | 3/8 | NPTF | __ | __ | __ | 0000000 | 000000 |
| C | 10 | 20,000 | 4 7/8"-7" | 2 1/8" | 4.1 | 2 1/4" | __ | __ | 2 1/4"-14 | __ | 10,000 | 3/8 | NPTF | No | 2 | 5/16" | 0000000 | 000000 |
| C | 10 | 20,000 | 9 3/4"-15 3/4" | 6" | 13.7 | 2 1/4" | __ | __ | 2 1/4"-14 | __ | 10,000 | 3/8 | NPTF | No | 2 | 5/16" | 0000000 | 000000 |
| C | 10 | 20,000 | 13 3/4"-23 3/4" | 10" | 22.7 | 2 1/4" | __ | __ | 2 1/4"-14 | __ | 10,000 | 3/8 | NPTF | No | 2 | 5/16" | 0000000 | 000000 |
| C | 15 | 30,000 | 10 3/4"-17 1/8" | 6 3/8" | 19 | 2 3/4" | __ | __ | 2 3/4"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 000000 |
| C | 20 | 40,000 | 3 7/8"-5 5/8" | 1 3/4" | 7.8 | 3 5/8" | __ | __ | __ | __ | 10,000 | 3/8 | NPTF | __ | __ | __ | 0000000 | 000000 |
| C | 25 | 50,000 | 10 3/4"-16 7/8" | 6 1/8" | 32.2 | 3 1/2" | __ | __ | 3 5/16"-12 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 000000 |
| C | 25 | 50,000 | 18 3/4"-32 7/8" | 14 1/8" | 73.4 | 3 1/2" | __ | __ | 3 5/16"-12 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 00000000 |
| C | 30 | 60,000 | 4 5/8"-7" | 2 3/8" | 15.8 | 4" | __ | __ | __ | __ | 10,000 | 3/8 | NPTF | __ | __ | __ | 0000000 | 000000 |
| C | 30 | 60,000 | 15 1/4"-23 1/2" | 8 1/4" | 53.6 | 4" | __ | __ | 3 5/16"-12 | __ | 10,000 | 3/8 | NPTF | __ | __ | __ | 000000 | 00000000 |
| C | 50 | 100,000 | 4 7/8"-7 1/4" | 2 3/8" | 22.8 | 4 7/8" | __ | __ | __ | __ | 10,000 | 3/8 | NPTF | __ | __ | __ | 0000000 | 00000000 |
| C | 55 | 110,000 | 11 1/8"-17 1/4" | 6 1/8" | 69 | 5" | __ | __ | 5"-12 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 00000000 |
| C | 100 | 200,000 | 5 5/8"-7 7/8" | 2 1/4" | 44.2 | 6 1/2" | __ | __ | __ | __ | 10,000 | 3/8 | NPTF | __ | __ | __ | 0000000 | 00000000 |
| C | 100 | 200,000 | 14 1/8"-20 3/4" | 6 5/8" | 137 | 7" | __ | __ | 6 7/8"-12 | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/4" | 000000 | 00000000 |
| D | 12 | 24,000 | 7 1/4"-10 1/4" | 3" | 8.3 | 2 3/4" | __ | __ | 2 3/4"-16 | 3/4" | 10,000 | 3/8 | NPTF | No | 2 | 5/16" | 0000000 | 00000000 |
| D | 20 | 40,000 | 6 1/2"-8 1/2" | 2" | 9.4 | 3 7/8" | __ | __ | 3 7/8"-12 | 1" | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 00000000 |
| D | 30 | 60,000 | 7 1/8"-9 5/8" | 2 1/2" | 18 | 4 1/2" | __ | __ | 4 1/2"-12 | 1 1/4" | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 00000000 |
| D | 30 | 60,000 | 13"-19 1/8" | 6 1/8" | 44.2 | 4 1/2" | __ | __ | 4 1/2"-12 | 1 1/4" | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 00000000 |
| D | 60 | 120,000 | 9 3/4"-12 3/4" | 3" | 38.2 | 6 1/4" | __ | __ | 6 1/4"-12 | 2 1/8" | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 00000000 |
Hydraulic Scissor Jacks
Fit these compact jacks under low-height loads.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity @ 4 3/4" Min. Ht. | Capacity @ 10 1/4" Max. Lift | Saddle | Base | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Max. Wd. | Movement | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | |
| 7/8 | 1,750 | 7/8 | 1,750 | 4 3/4"-15" | 10 1/4" | 15 1/2" | Rigid | 1 15/16" | 1 7/16" | 4 5/16" | 4 1/4" | 14 3/4" | Steel | Removable Handle | 00000000 | 0000000 |
Hydraulic Jacks with Wheels
Roll these jacks from job to job and under hard-to-reach places.
Bracket saddles provide a more secure hold and offer higher lifts than flat saddles. Designed to help mechanics perform maintenance and repair tasks on automotive transmissions, they swivel forward, backward, and side to side, to allow for easy access to all areas of your load.
Flat saddles hold larger loads than the bracket saddles and have a longer handle for more comfortable lifting.
Note: Jacks should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | Base | Wheel | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Movement | Dia. | Lg. | Wd. | Wd. | Lg. | Ht. | Handle Lg. | Body Material | Configuration | Material | Each | |
Bracket Saddle | ||||||||||||||||
| 1/2 | 1,000 | 8 1/2"-24 3/4" | 16 1/4" | Swivel | __ | 17" | 9 3/8" | 15" | 31" | 6 1/4" | 22 1/2" | Steel | Four Swivel Casters | Steel | 0000000 | 0000000 |
| 1 | 2,000 | 7 3/4"-33" | 25 1/4" | Swivel | __ | 17" | 15 1/2" | 18 1/2" | 40 1/2" | 7 1/2" | 22 1/2" | Steel | Four Swivel Casters | Steel | 0000000 | 000000 |
Flat Saddle | ||||||||||||||||
| 2 | 4,000 | 3 1/2"-18 1/2" | 15" | Rigid | 4 1/2" | __ | __ | 11 3/4" | 25 3/4" | 6" | 45" | Aluminum | Two Swivel and Two Rigid Casters | Steel | 0000000 | 000000 |
| 3 1/2 | 7,000 | 5 1/8"-21 1/2" | 22" | Swivel | 4 3/8" | __ | __ | 13 1/2" | 28 1/2" | 6 5/8" | 52 3/8" | Steel | Two Swivel and Two Rigid Casters | Cast Iron | 0000000 | 000000 |
Two-Height Hydraulic Jacks
These jacks are as versatile as bottle jacks, but with two lifting points—a toe for lifting loads low to the ground, and a saddle for a higher, more stable lifting point.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Saddle | Base | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Max. Lift | Ht. | Lg. | Wd. | Ht. | Lg. | Wd. | Movement | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | |
| 2 | 4,000 | 4 1/2" | 5/8"-5 1/8" | 2" | 2" | 9 1/4"-13 3/4" | 3 1/2" | 2 3/8" | Rigid | 5" | 7" | 11 1/2" | Steel | __ | 0000000 | 000000000 |
| 5 | 10,000 | 4 5/8" | 1"-5 5/8" | 2 1/4" | 3" | 11 1/2"-16 1/8" | 4 3/4" | 3 3/8" | Rigid | 7 1/8" | 10 5/8" | 23 1/2" | Steel | 180° Pivoting Handle | 0000000 | 00000000 |
| 10 | 20,000 | 5 5/8" | 1 1/8"-6 3/4" | 2 3/8" | 3 1/4" | 12 7/8"-18 1/2" | 5 3/4" | 4 5/8" | Rigid | 8 5/8" | 11 1/4" | 23 1/2" | Steel | 180° Pivoting Handle | 0000000 | 00000000 |
Air-Powered Hydraulic Lifting Jacks with Wheels
Roll this jack from job to job and under hard-to-reach places. It uses air pressure to raise loads with less effort than other jacks.
Note: Jacks should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | Base | Air Inlet | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Type | Movement | Dia. | Lg. | Wd. | Ht. | Handle Lg. | Air Pressure, psi | Air Hose Lg., ft. | Hose Connection Type | Pipe Size | Gender | Body Material | Wheel Material | Each | |
| 22 | 44,000 | 9 3/4"-19 1/4" | 9 1/2" | Flat | Rigid | 2" | 22 7/8" | 12 1/2" | 7" | 48 3/4" | 110-150 | 3 | Quick-Disconnect | 1/4 | Male | Steel | Plastic | 00000000 | 0000000 |
Air-Powered Hydraulic Bottle Jacks
These jacks use air pressure to raise loads with less effort than other bottle jacks. They can also be operated manually.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | Air Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Lg. | Wd. | Handle Lg. | Air Pressure, psi | Air Hose Lg., ft. | Hose Connection Type | Pipe Size | Gender | Body Material | Features | Each | |
| 20 | 40,000 | 9 3/4"-18 3/4" | 9" | 2 1/4" | 8 1/2" | 7 1/8" | 24" | 110-175 | 4 | Quick-Disconnect | 1/4 | Male | Steel | Manual Override, Removable Handle | 00000000 | 0000000 |
| 30 | 60,000 | 11"-18 1/8" | 7 1/8" | 2 1/2" | 10 1/4" | 8 1/4" | 38 1/8" | 110-175 | 4 | Quick-Disconnect | 1/4 | Male | Steel | Manual Override, Removable Handle | 00000000 | 000000 |