Made of aluminum-bronze, these extensions satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Bend these extensions around obstructions to turn hard-to-reach fasteners.

The square drive has a rounded shape that allows the extension to pivot inside the socket opening and turn it from an angle.

Push the square drive through the adapter to change size.

Pivot the head to access fasteners from an angle.

Fit these adapters between your wrench and socket to enable finger tightening.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Change a standard wrench handle into a ratcheting wrench.

Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.

Lock your socket into the extension to prevent accidental disengagement.

A magnet holds the socket, making changes quicker.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These short sockets fit spaces where height clearance is limited.

Pivot the head to access fasteners from an angle.

Quickly position these sockets on square and external 8-point fasteners.

These sockets fit the nuts found on water and gas valves.

Extra-long bits allow access to hard-to-reach fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

These sockets are also known as Robertson bits.

Extra-long bits allow access to hard-to-reach fasteners.

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

Turn nuts on bolts and threaded rod, which pass through these sockets.

Pivot the head to access fasteners from an angle.

Designed to fit inside strut channel, these sockets make it easier to mount the channel than using an extension or additional tools.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Achieve the best possible grip on hex fasteners and prevent rounding.

Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.

Pivot the head to access fasteners from an angle.

Pivot the head to access fasteners from an angle.

Extra length allows access to fasteners on long bolts.

Tighten or loosen nuts and bolts without damaging the finish.

The hex shape grips hex fasteners and prevents rounding.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

These sockets are also known as pin-in-hex or pin-in-socket bits.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Pivot the head to access fasteners from an angle.

With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

For high quality at a lower price, choose these U.S.A.-made sets.

Turn nuts on bolts and threaded rod, which pass through these sockets.

Grip the indentations around the outside of tri-groove fasteners.

Lock your socket into the extension to prevent accidental disengagement..

Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

Attach to your socket for a longer reach.

Pivot the head to access fasteners from an angle.

These sockets are made to withstand the high torque and force of impact tools.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Hold different square drive sizes on the four clip rails stored in these trays.

The slots in these low-profile organizers are a different color than the base so it's clear when tools are missing from your bench top or drawer.

The rail is smooth plastic so the clips move more easily than on steel-rail organizers.

Attach these adapters to square-drive tools.

No groove required—press these rings onto the end of a shaft for a firm grip.

Slide these rings into place with one twist—no tools required—for applications with high thrust loads.

Also known as poodle rings, these thick rings have "ears" that form a large retaining surface to withstand stronger forces than other side-mount retaining rings.

No groove required—these rings have teeth that firmly grip the bore.

Also known as flat-style speed nuts, these have large sides, so they're easy to push over threads by hand.