A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.

Built for tough industrial conditions, these wrenches have a gasket that seals lubrication in and keeps dirt, dust, and moisture out to protect the ratchet mechanism. When it’s time to release the socket, just push the button on the back of the wrench head.

The shaft on these wrenches extends and locks.

Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.

Made of aluminum-bronze, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

With no internal screws, these ratchet wrenches don’t have a single small part that could fall into and damage equipment.

No need to pull the socket off the tool—push a button to release.

Pivot the head and extend the handle—these wrenches adapt to reach fasteners in challenging spots. When it’s time to release the socket, just push the button on the back of the head.

Access fasteners in tight spots by pivoting the head to an optimal angle. These nonratcheting wrench handles are also known as breaker bars—they’re long enough for you to get the leverage needed to break stuck fasteners free.

Extend the shaft for additional length.

Loosen stubborn fasteners while working up high—these wrench handles clip to a carabiner or lanyard (not included) to prevent drops.

Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.

No need to pull the socket off the tool—push a button to release.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Faster than manual ratchet wrenches, these ratchet wrenches run on air to turn fasteners quickly.

Use these wrenches with impact sockets only.

The hex shape achieves the best possible grip on hex fasteners to prevent rounding their points.

Designed for use with stainless steel fasteners, these sockets are more corrosion resistant than steel sockets and less likely to flake.

Eliminate the risk of your socket falling while reaching into your workspace with these flex sockets that have an integrated extension.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

Pivot the head to access fasteners from an angle.

For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts.

Grip the indentations around the outside of tri-groove fasteners.

Quickly position these sockets on square and external 8-point fasteners.

Reach nuts obstructed by a fluid line or other barrier with these wrench heads.

The short bit on these sockets fits in spaces where height clearance is limited.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

These sockets are also known as pin-in-Torx bits.

Achieve the best possible grip on hex fasteners and prevent rounding.

Move from lug nut to lug nut with the speed of a racecar pit crew. Up to five standard 6-point lug nuts stack up in the shank of these sockets, so you don’t have to stop to take the lug nuts out of the socket.

Pivot the head to access fasteners from an angle.

Tighten or loosen nuts and bolts without damaging the finish.

The 12-point shape quickly positions on hex fasteners.

Extra length allows access to fasteners on long bolts.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These sockets are made to withstand the high torque and force of impact tools.

The short bit on these sockets fits in spaces where height clearance is limited.

Suitable for occasional maintenance work, these sets are imported.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

With more than double the clearance of standard sockets, the sockets in these sets access nuts on extra-long bolts.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts.

Keep a convenient variety of drive styles and sizes of bit sockets on hand.

Extra-long bits allow access to hard-to-reach fasteners.

Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.

Reach nuts obstructed by a fluid line or other barrier with the wrench heads in these sets.

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

Carry fewer impact sockets—these five reversible impact sockets turn 10 fastener sizes. Flip the socket around to turn a different size.

Use one socket to switch between two fastener sizes.

Pivot the head to access fasteners from an angle.

Convert from one square drive size to another.

The Torx bit sockets in these sets fasten Torx screws often used in vehicles, bicycles, and electronics.

Extend your socket's reach.

Safely extend your reach in areas where you could accidentally come into contact with live circuits.

Reach a variety of spots with the confidence that your extension won’t disengage.

The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.

Convert from one square drive size to another.

These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

Attach your square-drive sockets to drills, powered screwdrivers, and other tools that accept a hex shank.

Convert your socket into a flex socket to access fasteners from an angle.

Convert your socket into a flex socket without worrying about the adapter falling off.

Attach one of these adapters to a ratcheting box wrench to convert it to a ratcheting socket wrench.

Set a desired torque within the range.

Attach to your socket for a longer reach.

Lock your socket into the extension to prevent accidental disengagement.

Convert from one square drive size to another.

Pull the collar to quickly attach and remove sockets.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Use the pulsing of an air hammer along with the controlled turning of a hand wrench to release stuck fasteners without breaking them.

These adapters, which convert from one square drive size to another, were designed to tolerate continuous use with impact tools in high-volume production and assembly.

First developed for aerospace and automotive assembly processes, these extensions will stand up to your high-volume production and assembly lines.