The handle is covered in rubber for a comfortable grip.

A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.

Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.

Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

No need to pull the socket off the tool—push a button to release.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

Extend the shaft for additional length.

Position the head anywhere along the handle.

Turn sockets from above when there's not room to swing a standard wrench handle.

Pivot the head to access fasteners in tight spots.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Trust the precision of your measurements—these wrenches are accurate to ±1%.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Trust the precision of your measurements—these wrenches are accurate to ±2%.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

Anchor these multipliers for added stability.

Built for durability, these wrenches handle the demands of high-volume production and tough maintenance applications.

Built for durability, these high-performance tools handle the demands of high-volume production and tough maintenance applications.

Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These short sockets fit spaces where height clearance is limited.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.

Also known as pipe plug sockets, these sockets have a square shape that provides the best possible grip on square fasteners and prevents rounding.

Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.

Quickly position these sockets on square and external 8-point fasteners.

Grip the indentations around the outside of tri-groove fasteners.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

The short bit on these sockets fits in spaces where height clearance is limited.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

These sockets are also known as Robertson bits.

Make maximum contact with all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

Pivot the head to access fasteners from an angle.

A magnet holds the fastener securely enough to drive self-tapping screws.

With a smaller OD than standard sockets, these fit between tightly spaced fasteners.

Tighten or loosen nuts and bolts without damaging the finish.

Quickly position these sockets on square fasteners.

The 12-point shape quickly positions on hex fasteners.

Pivot the head to access fasteners from an angle.

Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.

The hex shape grips hex fasteners and prevents rounding.

Made of aluminum-bronze, these extensions satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Bend these extensions around obstructions to turn hard-to-reach fasteners.

Lock your socket into the extension to prevent accidental disengagement.

Push the square drive through the adapter to change size.

Change a standard wrench handle into a ratcheting wrench.

Attach one of these adapters to a socket to turn it with an open-end or box wrench.

Adapters are set to a specific torque and cannot be adjusted.

Fit these adapters between your wrench and socket to enable finger tightening.

Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.

A magnet holds the socket, making changes quicker.

Attach to your socket for a longer reach.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Bend these extensions around obstructions to access hard-to-reach fasteners.

Suitable for occasional maintenance work, these sets are imported.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Pivot the head to access fasteners from an angle.

Grip the indentations around the outside of tri-groove fasteners.

Quickly position these sockets on square fasteners.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

Extra-long bits allow access to hard-to-reach fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-hex or pin-in-socket bits.

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

Turn nuts on bolts and threaded rod, which pass through these sockets.

Lock your socket into the extension to prevent accidental disengagement..

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

These sockets are made to withstand the high torque and force of impact tools.

Lock your socket into the extension to prevent accidental disengagement.

Convert from one square drive size to another.