When you’re working up high, keep these wrenches secure at your side. Hook their tether ring to a carabiner or lanyard (not included), so they won’t fall to the ground if dropped.

Sealed against dust, dirt, and moisture, these wrenches can be used in greasy machine shops and dusty construction sites.

Also known as rotator ratchets, these wrenches let you rotate the grip to tighten a socket. They're useful when you don't have the space to swing the handle side to side.

Pair these wrenches with a bolt-through socket to reach nuts at the bottom of a long threaded rod or bolt which can pass through the head of the wrench.

Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.

Extend the length of these wrenches for more reach—the shaft locks into place at set increments. When it’s time to change your socket, release it with the push of a button.

Flip between 1/4″ and 3/8″ drive-size sockets without switching out your wrench.

No need to pull the socket off the tool—push a button to release.

Sealed with a gasket to keep lubrication in and debris out, these wrenches can be used in dusty environments. The head pivots, so you can access fasteners in tight places.

Grip the angled handle on these wrenches to reach over obstructions and pivot the head to access fasteners in hard-to-reach places.

A ratcheting head on these wrench handles means there’s no need to reposition them when breaking stuck fasteners free. They’re also known as breaker bars.

Loosen stubborn fasteners while working up high—these wrench handles clip to a carabiner or lanyard (not included) to prevent drops.

Position the head anywhere along the handle.

The ratcheting mechanism turns sockets quickly.

A soft, contoured grip gives you a secure, comfortable hold. Use these handles to tighten and loosen sockets from above when there isn’t room to swing a standard wrench.

Pivot the head to access fasteners in tight spots.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Measure with an accuracy of ±2%.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Trust the precision of your measurements—these wrenches are accurate to ±2%.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

Take a swing and hit these wrenches with a hammer to generate the extra torque you need to break stuck fasteners free. Also known as slugging wrenches.

A ratchet mechanism allows you to drive fasteners when there's little space to move the handle.

Drive screws four times faster than ratcheting alone. Grip the speed housing at the base of the shaft with one hand while turning the handle with the other. A magnet at the end of the shaft holds bits in place.