A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.

Built for tough industrial conditions, these wrenches have a gasket that seals lubrication in and keeps dirt, dust, and moisture out to protect the ratchet mechanism. When it’s time to release the socket, just push the button on the back of the wrench head.

The shaft on these wrenches extends and locks.

No need to pull the socket off the tool—push a button to release.

Customize the handle angle to reach over obstructions or fold the handle away to create a palm ratchet.

The convenience of quick socket changes combined with the versatility of a folding wrench.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Pivot the head on these wrenches to access fasteners in tight spots.

Reach over obstructions and access fasteners in tight spots—even in dirty and dusty areas. To protect the ratcheting mechanism, these wrenches have a gasket that seals lubrication in and keeps debris out.

Pivot the head and extend the handle—these wrenches adapt to reach fasteners in challenging spots. When it’s time to release the socket, just push the button on the back of the head.

Access fasteners in tight spots by pivoting the head to an optimal angle. These nonratcheting wrench handles are also known as breaker bars—they’re long enough for you to get the leverage needed to break stuck fasteners free.

Loosen stubborn fasteners while working up high—these wrench handles clip to a carabiner or lanyard (not included) to prevent drops.

Turn sockets from above when there's not room to swing a standard wrench handle.

Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.

No need to pull the socket off the tool—push a button to release.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Trust the precision of your measurements—these wrenches are accurate to ±1%.

Trust the precision of your measurements—these wrenches are accurate to ±2%.

A main pointer on the dial shows torque as it’s being applied and a memory pointer indicates the maximum torque reached.

Turn sockets from above when there's not room to swing a standard wrench handle.

Faster than manual ratchet wrenches, these ratchet wrenches run on air to turn fasteners quickly.

Loosen stubborn fasteners—these wrenches operate at full torque counterclockwise to break stuck bolts free.

The hex shape achieves the best possible grip on hex fasteners to prevent rounding their points.

With more than double the clearance of standard sockets, these sockets access nuts on extra-long bolts.

Hold fasteners securely in place as you drive them.

Pivot the head to access fasteners from an angle.

For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts.

Quickly position these sockets on square and external 8-point fasteners.

Turn multiple shapes and sizes of fasteners with a single socket.

Slip these slotted sockets onto wing nuts to tighten or loosen them with more force than fingers can apply.

Extra-long bits allow access to hard-to-reach fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

An extra-long Phillips bit allows these sockets to reach far-away fasteners. Use them where standard or stubby sockets can’t reach.

These sockets are also known as pin-in-hex or pin-in-socket bits.

Reach nuts obstructed by a fluid line or other barrier with these wrench heads.

A rubber insert grips the plug to prevent damage.

Achieve the best possible grip on hex fasteners and prevent rounding.

With a smaller OD than standard sockets, these fit between tightly spaced fasteners.

Pivot the head to access fasteners from an angle.

Quickly position these sockets on square fasteners.

These sockets are made to withstand the high torque and force of impact tools.

These sockets fasten Torx screws often used in vehicles, bicycles, and electronics.

These sockets are designed to tolerate continuous use with power tools and impact tools in high-volume production and assembly.

Extend your socket's reach.

Keep common extension lengths on hand to reach a variety of spots—just attach them to your socket.

Bend these extensions to reach inconveniently located fasteners. These sets include multiple extension lengths, so you can find the right length to reach around obstructions.

The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.

Lock your socket into these extensions to prevent accidental disengagement.

Push the square drive through the adapter to change size.

Convert your socket into a flex socket to access fasteners from an angle.

Convert your socket into a flex socket without worrying about the adapter falling off.

Attach your square-drive sockets to drills, powered screwdrivers, and other tools that accept a hex shank.

Fit these adapters between a wrench and socket to enable finger tightening.

Already set to a specific torque limit, these adapters audibly click and release when you reach that setting to prevent overtightening.

Attach one of these adapters to a ratcheting box wrench to convert it to a ratcheting socket wrench.

Convert from one square drive size to another.

Lock your socket into the extension to prevent accidental disengagement.

Convert your impact socket into a flex socket to access fasteners from an angle.

Also known as positive-locking extensions, these extensions hold sockets place with a ball that only retracts when you pull the collar down. Designed to prevent accidental detachment, they lock to your socket more securely than other extensions.

Pull the collar to quickly attach and remove sockets.

These adapters, which convert from one square drive size to another, were designed to tolerate continuous use with impact tools in high-volume production and assembly.

Use these adapters to connect sockets to impact wrenches and other power tools—they’re designed to tolerate continuous use in high-volume production and assembly.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

The sockets in these sets have a cutout and extra length so you can reach and twist nuts without having to disconnect your line.

Two spring-loaded balls inside these sockets firmly hold nuts and bolts in place as you turn them, including nonmagnetic fasteners like stainless steel screws.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

These sets organize what you need when working around live electrical circuits.

With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.

Extra-long bits allow access to hard-to-reach fasteners.

A spring-loaded ball on the bit holds fasteners in place as you drive them, including nonmagnetic fasteners like stainless steel screws.

Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.

These sockets are also known as pin-in-Torx bits.

Attach one of the heads in these sets to a torque wrench for more leverage to loosen a stubborn fastener.

Reach nuts obstructed by a fluid line or other barrier with the wrench heads in these sets.