About Reamers
More
High-Speed Steel Round-Shank Reamers
The shank diameter is slightly smaller than the reamer diameter.
Straight-flute reamers are for general purpose cutting.
Spiral-flute reamers create a smoother finish than straight flutes and work well in keyways and other applications with an interrupted cut. Reamers with a right-hand spiral pull chips upward as they cut, so they’re often used in blind holes.
For technical drawings and 3-D models, click on a part number.
Reamer | Lg. | |||||||
|---|---|---|---|---|---|---|---|---|
| Size | Dia. | Flute | Overall | Number of Flutes | Cutting Dia. Tolerance | For Use On | Each | |
Straight Flute | ||||||||
| 15/16" | 0.9375" | 2 5/8" | 10" | 10 | 0" to 0.0004" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 0000000 |
Reamer | Lg. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Dia. | Flute | Overall | Number of Flutes | Cut Direction | Cutting Dia. Tolerance | For Use On | Each | |
Right-Hand Spiral Flute | |||||||||
| 15/16" | 0.9375" | 2 5/8" | 10" | 8 | Right Hand | 0.0001" to 0.0004" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 0000000 |
Cobalt Steel Round-Shank Reamers
Choose these cobalt steel reamers for good performance on hard-to-machine materials. The shank diameter is slightly smaller than the reamer diameter.
For technical drawings and 3-D models, click on a part number.
Reamer | Lg. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Dia. | Flute | Overall | Number of Flutes | Flute Style | Cutting Dia. Tolerance | For Use On | Each | |
Cobalt Steel | |||||||||
| 15/16" | 0.9375" | 2 5/8" | 10" | 8 | Straight | 0" to 0.0004" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 0000000 |
Inch Size Hand Reamers
Use a straight-handle tap wrench (sold separately) to turn these reamers by hand. The cutting end is slightly tapered to ease hole entry for the final sizing of drilled holes. Choose a straight-handle tap wrench that fits the diameter of your hand reamer.
Straight-flute reamers are for general purpose cutting.
Spiral-flute reamers have a left-hand spiral and a right-hand cut. They push chips downward as they cut, so they’re often used in through holes. Spiral flutes create a smoother finish than straight flutes and work well in keyways and other applications with an interrupted cut.
For technical drawings and 3-D models, click on a part number.
Reamer | Lg. | Direction | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Dia. | Square Shank Size | Flute | Overall | Number of Flutes | Spiral | Cut | Cutting Dia. Tolerance | For Use On | Each | |
High-Speed Steel | |||||||||||
Straight Flute | |||||||||||
| 15/16" | 0.9375" | 0.705" | 5 1/8" | 10 1/4" | 8 | __ | __ | 0.0001" to 0.0004" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 0000000 |
Spiral Flute | |||||||||||
| 15/16" | 0.9375" | 0.705" | 5 1/8" | 10 1/4" | 8 | Left Hand | Right Hand | 0.0001" to 0.0004" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 |
Round-Shank Reamers for Hole Alignment with Safety Collar
A collar on the shank prevents you from reaming past the cutting edge. These reamers are for use with hand-held electric and air tools. Also known as bridge reamers, car reamers, and aligning reamers, they ream, true, enlarge, align, and debur holes. All have tapered ends for easy entry into misaligned holes. They are not for reaming tapered holes.
For technical drawings and 3-D models, click on a part number.
Reamer Dia. | Lg. | Direction | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Reamer Size | (A) | (B) | Shank Dia. | Flute | Overall | Flute Style | Spiral | Cut | Cutting Dia. Tolerance | For Use On | Each | |
High-Speed Steel | ||||||||||||
| 15/16" | 0.9375" | 0.5938" | 1/2" | 5 1/8" | 7 1/4" | Spiral | Left Hand | Right Hand | 0" to 0.005" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 0000000 |
Round-Shank Reamers for Hole Alignment
For use with hand-held electric and air tools, these ream, true, enlarge, align, and debur holes. They’re also known as bridge reamers, car reamers, and aligning reamers. All have tapered ends for easy entry into misaligned holes. They are not for reaming tapered holes.
For technical drawings and 3-D models, click on a part number.
Reamer Dia. | Lg. | Direction | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Reamer Size | (A) | (B) | Shank Dia. | Flute | Overall | Number of Flats | Flute Style | Spiral | Cut | Cutting Dia. Tolerance | For Use On | Each | |
High-Speed Steel | |||||||||||||
| 15/16" | 0.9375" | 0.5625" | 1/2" | 4 1/2" | 6 7/8" | 3 | Spiral | Left Hand | Right Hand | 0" to 0.01" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 0000000 |
Hex Nut-Shank Reamers for Hole Alignment with Safety Magnets
Magnets on the hex nut hold the reamer in place in your tool and prevent it from accidentally falling when not in the square-drive impact wrench socket. Also known as bridge reamers, car reamers, and aligning reamers, they ream, true, enlarge, align, and debur holes. All have tapered ends for easy entry into misaligned holes. Do not use for reaming tapered holes.
Reamers with spiral flutes are a good choice for materials that are difficult to ream, such as high-carbon steel and cast iron.
Reamers with helical-spiral flutes create a fine finish and reduce the chance of breakage because they move chips forward, which prevents the chips from packing into the flutes.
Reamer Dia. | Lg. | Direction | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Reamer Size | (A) | (B) | Hex Shank Size | Flute | Overall | Spiral | Cut | Cutting Dia. Tolerance | For Use On | Each | |
High-Speed Steel | |||||||||||
Spiral | |||||||||||
| 15/16" | 0.9375" | 0.5938" | 1 7/16" | 5" | 7" | Left Hand | Right Hand | 0" to 0.01" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 0000000 |
| 15/16" | 0.9375" | 0.5938" | 1 7/16" | 7 3/8" | 9 3/8" | Left Hand | Right Hand | 0" to 0.01" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 |
| 1 1/4" | 1.2500" | 0.9375" | 1 13/16" | 7 3/8" | 9 3/8" | Left Hand | Right Hand | 0" to 0.01" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 |
Helical Spiral | |||||||||||
| 15/16" | 0.9375" | 0.5938" | 1 7/16" | 5" | 7" | Left Hand | Right Hand | 0" to 0.01" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 |
Hex Nut-Shank Reamers for Hole Alignment
The hex nut on the end of the shank lets you use these reamers with square-drive impact wrench sockets. Also called bridge reamers, car reamers, and aligning reamers, they ream, true, enlarge, align, and debur holes. All have tapered ends for easy entry into misaligned holes. Do not use for reaming tapered holes.
For technical drawings and 3-D models, click on a part number.
Reamer Dia. | Lg. | Direction | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Reamer Size | (A) | (B) | Hex Shank Size | Flute | Overall | Flute Style | Spiral | Cut | Cutting Dia. Tolerance | For Use On | Each | |
High-Speed Steel | ||||||||||||
| 15/16" | 0.9375" | 0.5938" | 1 7/16" | 5" | 7" | Spiral | Left Hand | Right Hand | 0" to 0.01" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 0000000 |
| 15/16" | 0.9375" | 0.5938" | 1 7/16" | 7 3/8" | 9 3/8" | Spiral | Left Hand | Right Hand | 0" to 0.01" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 |
Morse Taper-Shank Reamers for Hole Alignment
Use these reamers in stationary machines to ream, true, enlarge, align, and debur holes. They’re also called bridge reamers, car reamers, and aligning reamers. All have tapered ends for easy entry into misaligned holes. Do not use for reaming tapered holes.
For technical drawings and 3-D models, click on a part number.
Reamer | Lg. | Direction | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Reamer Size | Dia. (A) | Dia. (B) | Morse Taper Number | Flute | Overall | Flute Style | Spiral | Cut | Cutting Dia. Tolerance | For Use On | Each | |
High-Speed Steel | ||||||||||||
| 15/16" | 0.9375" | 0.5938" | 3 | 5" | 9 1/2" | Spiral | Left Hand | Right Hand | 0" to 0.01" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 0000000 |
| 15/16" | 0.9375" | 0.5938" | 3 | 7 3/8" | 12" | Spiral | Left Hand | Right Hand | 0" to 0.01" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 |
| 1 1/4" | 1.2500" | 0.9375" | 4 | 7 3/8" | 13" | Spiral | Left Hand | Right Hand | 0" to 0.01" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 |