McMaster-Carr logo
    Filter by
    System of Measurement
    Flute Type
    Number of Flutes
    Reamer Operation
    Spiral Direction
    Rate of Taper
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Blade Shape
    Number of Pieces
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    292 Products

    Reamer Type

    Reamer Type

    Reamers

    Finish holes to precise inch, metric, wire gauge, or letter sizes with these reamers.
    Square Shank
    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Lg.
    Reamer Dia.
    Material
    Square Shank
    Size
    Flute
    Overall
    No. of
    Flutes
    Spiral
    Direction
    Cutting Dia.
    Tolerance
    Specs.
    Met
    For Use On
    Each
    Straight Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers, Square Shank, Straight Flute.
     
    Inch
    0.1250" (1/8")High-Speed Steel0.095"1 1/2"3"4—0" to 0.0002"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1875" (3/16")High-Speed Steel0.144"1 3/4"3 1/2"6—0" to 0.0002"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2500" (1/4")High-Speed Steel0.185"2"4"6—0" to 0.0002"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.3125" (5/16")High-Speed Steel0.235"2 1/4"4 1/2"6—0" to 0.0002"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.3750" (3/8")High-Speed Steel0.280"2 1/2"5"6—0" to 0.0002"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.4375" (7/16")High-Speed Steel0.330"2 3/4"5 1/2"6—0" to 0.0002"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.5000" (1/2")High-Speed Steel0.375"3"6"6—0" to 0.0002"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.5625" (9/16")High-Speed Steel0.420"3 1/4"6 1/2"8—0" to 0.0003"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.6250" (5/8")High-Speed Steel0.470"3 1/2"7"8—0" to 0.0003"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.6875" (11/16")High-Speed Steel0.515"3 7/8"7 3/4"8—0.0001" to 0.0004"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.7500" (3/4")High-Speed Steel0.560"4 3/16"8 3/8"8—0.0001" to 0.0004"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.8750" (7/8")High-Speed Steel0.655"4 7/8"9 3/4"8—0.0001" to 0.0004"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.9375" (15/16")High-Speed Steel0.705"5 1/8"10 1/4"8—0.0001" to 0.0004"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1.0000" (1")High-Speed Steel0.750"5 7/16"10 7/8"8—0.0001" to 0.0004"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1.1250" (1 1/8")High-Speed Steel0.845"5 13/16"11 5/8"8—0.0001" to 0.0004"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1.2500" (1 1/4")High-Speed Steel0.935"6 1/8"12 1/4"10—0.0001" to 0.0004"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     
    Spiral Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers, Square Shank, Spiral Flute.
     
    Inch
    0.1250" (1/8")High-Speed Steel0.095"1 1/2"3"4Left Hand0" to 0.0002"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1875" (3/16")High-Speed Steel0.140"1 3/4"3 1/2"6Left Hand0" to 0.0002"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2500" (1/4")High-Speed Steel0.185"2"4"6Left Hand0" to 0.0002"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.3125" (5/16")High-Speed Steel0.235"2 1/4"4 1/2"6Left Hand0" to 0.0002"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.3750" (3/8")High-Speed Steel0.280"2 1/2"5"6Left Hand0" to 0.0002"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.4375" (7/16")High-Speed Steel0.330"2 3/4"5 1/2"6Left Hand0" to 0.0002"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.5000" (1/2")High-Speed Steel0.375"3"6"6Left Hand0" to 0.0002"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.5625" (9/16")High-Speed Steel0.420"3 1/4"6 1/2"8Left Hand0" to 0.0003"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.6250" (5/8")High-Speed Steel0.470"3 1/2"7"8Left Hand0" to 0.0003"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.6875" (11/16")High-Speed Steel0.515"3 7/8"7 3/4"8Left Hand0.0001" to 0.0004"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.7500" (3/4")High-Speed Steel0.560"4 3/16"8 3/8"8Left Hand0.0001" to 0.0004"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.8750" (7/8")High-Speed Steel0.655"4 7/8"9 3/4"8Left Hand0.0001" to 0.0004"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.9375" (15/16")High-Speed Steel0.705"5 1/8"10 1/4"8Left Hand0.0001" to 0.0004"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1.0000" (1")High-Speed Steel0.750"5 7/16"10 7/8"8Left Hand0.0001" to 0.0004"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1.1250" (1 1/8")High-Speed Steel0.845"5 13/16"11 5/8"8Left Hand0.0001" to 0.0004"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1.2500" (1 1/4")High-Speed Steel0.935"6 1/8"12 1/4"10Left Hand0.0001" to 0.0004"—Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     
    Metric
    2.0000 mmHigh-Speed Steel1.6 mm25 mm50 mm4Left Hand0.004 mm to 0.008 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    2.5000 mmHigh-Speed Steel2.1 mm29 mm58 mm4Left Hand0.004 mm to 0.008 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    3.0000 mmHigh-Speed Steel2.4 mm31 mm62 mm6Left Hand0.004 mm to 0.008 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    4.0000 mmHigh-Speed Steel3 mm38 mm76 mm6Left Hand0.005 mm to 0.01 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    5.0000 mmHigh-Speed Steel3.8 mm44 mm87 mm6Left Hand0.005 mm to 0.01 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    5.5000 mmHigh-Speed Steel4.3 mm47 mm93 mm6Left Hand0.005 mm to 0.01 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    6.0000 mmHigh-Speed Steel4.9 mm47 mm93 mm6Left Hand0.005 mm to 0.01 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    6.5000 mmHigh-Speed Steel4.9 mm50 mm100 mm6Left Hand0.006 mm to 0.012 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    7.0000 mmHigh-Speed Steel5.5 mm54 mm107 mm6Left Hand0.006 mm to 0.012 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    8.0000 mmHigh-Speed Steel6.2 mm58 mm115 mm6Left Hand0.006 mm to 0.012 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    9.0000 mmHigh-Speed Steel7 mm62 mm124 mm6Left Hand0.006 mm to 0.012 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    10.0000 mmHigh-Speed Steel8 mm66 mm133 mm6Left Hand0.006 mm to 0.012 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    11.0000 mmHigh-Speed Steel9 mm71 mm142 mm6Left Hand0.008 mm to 0.015 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    12.0000 mmHigh-Speed Steel9 mm76 mm152 mm6Left Hand0.008 mm to 0.015 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    13.0000 mmHigh-Speed Steel9 mm76 mm152 mm6Left Hand0.008 mm to 0.015 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    14.0000 mmHigh-Speed Steel11 mm81 mm163 mm8Left Hand0.008 mm to 0.015 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    15.0000 mmHigh-Speed Steel12 mm81 mm163 mm8Left Hand0.008 mm to 0.015 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    16.0000 mmHigh-Speed Steel12 mm87 mm175 mm8Left Hand0.008 mm to 0.015 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    17.0000 mmHigh-Speed Steel13 mm87 mm175 mm8Left Hand0.008 mm to 0.015 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    18.0000 mmHigh-Speed Steel14.5 mm93 mm188 mm8Left Hand0.008 mm to 0.015 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    20.0000 mmHigh-Speed Steel16 mm100 mm201 mm8Left Hand0.009 mm to 0.017 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    22.0000 mmHigh-Speed Steel18 mm107 mm215 mm8Left Hand0.009 mm to 0.017 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    25.0000 mmHigh-Speed Steel20 mm115 mm231 mm8Left Hand0.009 mm to 0.017 mmDIN 206Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     
    Adjustable Size, Square Shank
    Finish multiple hole sizes with one reamer by moving the adjustable blades within the diameter range. Convenient for maintenance work, these have a large diameter range and don't require powered tools. They're often used to make precise size adjustments during installation of bearings and bushings.
    Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Extension pilots (not included) can be used in place of the end adjustment nut to align holes that are spaced far apart.
    Straight Blade—Use these reamers in straight holes that don't have a keyway or other breaks in the surface.
    Angled Blade—These reamers are better than those with straight blades for finishing holes with breaks in the surface, such as a keyway.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Tool Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
    Reamers
    Replacement Blades
    Optional
    Extension Pilots
    Reamer Dia.
    Material
    Square Shank
    Size
    Overall
    Lg.
    No. of
    Blades
    For Use On
    Each
    Pkg.
    Qty.
    Pkg.
    Each
    Straight Blade
    Image of Product. Front orientation. Reamers. Reamers, Adjustable Size, Square Shank, Straight Blade.
     
    Inch
    0.2500" to 0.2813" (1/4" to 9/32")High-Speed Steel0.1160"3 1/4"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000004000000000000000000000000000
    0.2813" to 0.3125" (9/32" to 5/16")High-Speed Steel0.1250"3 5/8"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000040000000000000000000000000
    0.3125" to 0.3438" (5/16" to 11/32")High-Speed Steel0.1560"4"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000040000000000000000000000000
    0.3438" to 0.3750" (11/32" to 3/8")High-Speed Steel0.1560"4 1/4"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000040000000000000000000000000
    0.3750" to 0.4063" (3/8" to 13/32")High-Speed Steel0.1710"4 1/2"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000040000000000000000000000000
    0.4063" to 0.4375" (13/32" to 7/16")High-Speed Steel0.1870"4 3/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000060000000000000000000000000
    0.4375" to 0.4688" (7/16" to 15/32")High-Speed Steel0.1870"5 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000060000000000000000000000000
    0.4688" to 0.5313" (15/32" to 17/32")High-Speed Steel0.1870"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.5313" to 0.5938" (17/32" to 19/32")High-Speed Steel0.2180"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.5938" to 0.6563" (19/32" to 21/32")High-Speed Steel0.2810"6 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.6563" to 0.7188" (21/32" to 23/32")High-Speed Steel0.3120"6 7/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.7188" to 0.7813" (23/32" to 25/32")High-Speed Steel0.3430"7 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.7813" to 0.8438" (25/32" to 27/32")High-Speed Steel0.4060"7 1/2"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.8438" to 0.9375" (27/32" to 15/16")High-Speed Steel0.4370"8 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.9375" to 1.0625" (15/16" to 1 1/16")High-Speed Steel0.5000"9 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    1.0625" to 1.1875" (1 1/16" to 1 3/16")High-Speed Steel0.5310"10 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    1.1875" to 1.3438" (1 3/16" to 1 11/32")High-Speed Steel0.6250"11 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    1.3438" to 1.5313" (1 11/32" to 1 17/32")High-Speed Steel0.6400"12"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000600000000000000000000000000
    1.5313" to 1.7813" (1 17/32" to 1 25/32")High-Speed Steel0.7500"14 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000600000000000000000000000000
    1.7813" to 2.0938" (1 25/32" to 2 3/32")High-Speed Steel0.9370"16"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000600000000000000000000000000
    2.0938" to 2.4688" (2 3/32" to 2 15/32")High-Speed Steel1.1870"18"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000600000000000000000000000000
    2.1875" to 2.5625" (2 3/16" to 2 9/16")Tool Steel
    		1.2500"18"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    2.5625" to 3.0000" (2 9/16" to 3")Tool Steel
    		1.4680"20"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
     
    Angled Blade
    Image of Product. Front orientation. Reamers. Reamers, Adjustable Size, Square Shank, Angled Blade.
     
    Inch
    0.4219" to 0.4531" (27/64" to 29/64")Tool Steel
    		0.1870"5 3/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.4219" to 0.4688" (27/64" to 15/32")Tool Steel
    		0.1870"5 3/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000600000000000000000000000
    0.4375" to 0.5000" (7/16" to 1/2")Tool Steel
    		0.1870"5 3/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.4688" to 0.5313" (15/32" to 17/32")Tool Steel
    		0.1870"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.5000" to 0.5625" (1/2" to 9/16")Tool Steel
    		0.2180"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000600000000000000000000000
    0.5313" to 0.5938" (17/32" to 19/32")Tool Steel
    		0.2180"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.5625" to 0.6250" (9/16" to 5/8")Tool Steel
    		0.2640"5 7/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.5938" to 0.6563" (19/32" to 21/32")Tool Steel
    		0.2810"6 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.6250" to 0.6875" (5/8" to 11/16")Tool Steel
    		0.2810"6 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.6563" to 0.7188" (21/32" to 23/32")Tool Steel
    		0.3120"6 7/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.6875" to 0.7500" (11/16" to 3/4")Tool Steel
    		0.3120"6 7/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.7188" to 0.7813" (23/32" to 25/32")Tool Steel
    		0.3430"7 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.7500" to 0.8125" (3/4" to 13/16")Tool Steel
    		0.3430"7 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.7813" to 0.8438" (25/32" to 27/32")Tool Steel
    		0.4060"7 1/2"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.8125" to 0.8750" (13/16" to 7/8")Tool Steel
    		0.4060"7 1/2"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.8438" to 0.9375" (27/32" to 15/16")Tool Steel
    		0.4370"8 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.8750" to 1.0000" (7/8" to 1")Tool Steel
    		0.4370"8 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.9375" to 1.0625" (15/16" to 1 1/16")Tool Steel
    		0.5000"9 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    1.0000" to 1.1250" (1" to 1 1/8")Tool Steel
    		0.5000"9 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    1.0625" to 1.1875" (1 1/16" to 1 3/16")Tool Steel
    		0.5310"10 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    1.1250" to 1.2500" (1 1/8" to 1 1/4")Tool Steel
    		0.5490"10 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    1.1875" to 1.3438" (1 3/16" to 1 11/32")Tool Steel
    		0.6250"11 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    1.2500" to 1.4375" (1 1/4" to 1 7/16")Tool Steel
    		0.6250"11 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000060000000000000000000000000
    1.3438" to 1.5313" (1 11/32" to 1 17/32")Tool Steel
    		0.6400"12"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    1.4375" to 1.6250" (1 7/16" to 1 5/8")Tool Steel
    		0.7500"12"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000060000000000000000000000000
    1.5313" to 1.7813" (1 17/32" to 1 25/32")Tool Steel
    		0.7500"14 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    1.6250" to 1.8750" (1 5/8" to 1 7/8")Tool Steel
    		0.8750"14 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    1.7813" to 2.0938" (1 25/32" to 2 3/32")Tool Steel
    		0.9370"16"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    1.8750" to 2.1875" (1 7/8" to 2 3/16")Tool Steel
    		1.0320"16"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    2.0938" to 2.4688" (2 3/32" to 2 15/32")Tool Steel
    		1.1870"18"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
     
    Expandable Flutes, Square Shank
    Unlike standard reamers, which are unusable once they become worn, these can be returned to their original size for finishing holes. After the reamer is worn down, tighten the set screw to expand the diameter, grind the reamer to its original size, and get back to work.
    These are not designed for producing holes larger than the listed diameter or for producing holes of various sizes. The set screw should not be loosened.
    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Reamers
    Optional
    Straight-Handle Tap Wrenches
    Lg.
    Reamer Dia.
    Material
    Square Shank
    Size
    Flute
    Overall
    No. of
    Flutes
    Spiral
    Direction
    Cutting Dia.
    Tolerance
    Recommended Expansion
    Limit
    For Use On
    Each
    Each
    Straight Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers, Expandable Flutes, Square Shank, Straight Flute.
     
    Inch
    0.2500" (1/4")High-Speed Steel0.185"1 7/16"3 7/8"6—-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    0.3125" (5/16")High-Speed Steel0.235"1 3/4"4"6—-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000000000000000
    0.3750" (3/8")High-Speed Steel0.280"1 3/4"5"6—-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000000000000000
    0.5000" (1/2")High-Speed Steel0.375"1 13/16"5 1/2"6—-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000000000000000
    0.6250" (5/8")High-Speed Steel0.470"2 1/2"7"6—-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000000000000000
    0.7500" (3/4")High-Speed Steel0.560"2 11/16"7 1/16"8—-0.0005" to 0"0.013"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    0.8750" (7/8")High-Speed Steel0.655"3 5/16"7 1/2"8—-0.0005" to 0"0.013"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    1.0000" (1")High-Speed Steel0.750"3 3/4"10"8—-0.0005" to 0"0.013"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
     
    Spiral Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers, Expandable Flutes, Square Shank, Spiral Flute.
     
    Inch
    0.2500" (1/4")High-Speed Steel0.185"1 7/16"3 7/8"6Left Hand-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000000000000000
    0.3125" (5/16")High-Speed Steel0.235"1 3/4"4"6Left Hand-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000
    0.3750" (3/8")High-Speed Steel0.280"1 3/4"5"6Left Hand-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000000000000000
    0.5000" (1/2")High-Speed Steel0.375"1 13/16"5 1/2"6Left Hand-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000000000000000
    0.6250" (5/8")High-Speed Steel0.470"2 1/2"7"6Left Hand-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000000000000000
    0.7500" (3/4")High-Speed Steel0.560"2 11/16"8"8Left Hand-0.0005" to 0"0.013"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    0.8750" (7/8")High-Speed Steel0.655"3 5/16"7 1/2"8Left Hand-0.0005" to 0"0.013"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    1.0000" (1")High-Speed Steel0.750"3 3/4"10"8Left Hand-0.0005" to 0"0.013"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
     

    Reamers for Taper-Pin Holes

    Shape holes to match the profile of taper pins. After drilling a hole that matches the size of the small end of the taper pin you want to install, use these reamers to taper and finish the hole.
    Square Shank
    Turn these reamers by hand with an adjustable wrench, straight-handle tap wrench, or pin vise (sold separately).
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Lg.
    For Taper
    Pin No.
    Reamer Dia.
    (A)
    Reamer Dia.
    (B)
    Material
    Square Shank
    Size
    Flute
    Overall
    No. of
    Flutes
    Spiral
    Direction
    Cutting Dia.
    Tolerance
    Rate of
    Taper
    For Use On
    Each
    Straight Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Taper-Pin Holes, Square Shank, Straight Flute.
     
    Inch
    7/00.0666"0.0497"High-Speed Steel0.0600"13/16"1 13/16"4—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    6/00.0806"0.0611"High-Speed Steel0.0700"15/16"1 15/16"4—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    5/00.0966"0.0719"High-Speed Steel0.0800"1 3/16"2 3/16"4—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    4/00.1142"0.0869"High-Speed Steel0.0950"1 5/16"2 5/16"4—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    3/00.1302"0.1029"High-Speed Steel0.1050"1 5/16"2 5/16"4—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    2/00.1462"0.1137"High-Speed Steel0.1150"1 9/16"2 9/16"4—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    00.1638"0.1287"High-Speed Steel0.1300"1 11/16"2 15/16"6—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    10.1798"0.1447"High-Speed Steel0.1400"1 11/16"2 15/16"6—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    20.2008"0.1605"High-Speed Steel0.1500"1 15/16"3 3/16"6—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    30.2294"0.1813"High-Speed Steel0.1750"2 5/16"3 11/16"6—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    40.2604"0.2071"High-Speed Steel0.2000"2 9/16"4 1/16"6—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    50.2994"0.2409"High-Speed Steel0.2350"2 13/16"4 5/16"6—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    60.3540"0.2773"High-Speed Steel0.2700"3 11/16"5 7/16"6—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    70.4220"0.3297"High-Speed Steel0.3050"4 7/16"6 5/16"6—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    80.5050"0.3971"High-Speed Steel0.3300"5 3/16"7 3/16"6—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    90.6066"0.4805"High-Speed Steel0.4200"6 1/16"8 5/16"8—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    100.7216"0.5799"High-Speed Steel0.4700"6 13/16"9 5/16"8—-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    110.8780"0.7060"High-Speed Steel0.5600"8 1/4"11 1/4"8—0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    121.0500"0.8420"High-Speed Steel0.5600"10"13 7/8"8—0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    131.2590"1.0090"High-Speed Steel0.7950"12"16"10—0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    141.5420"1.2500"High-Speed Steel1.0800"14"18 1/4"10—0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     
    Metric
    2 mm2.8600 mm1.9000 mmHigh-Speed Steel2.2 mm48 mm68 mm4—0 mm to 0.075 mm1:50Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000
    2.5 mm3.3600 mm2.4000 mmHigh-Speed Steel2.8 mm48 mm68 mm4—0 mm to 0.075 mm1:50Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    3 mm4.0600 mm2.9000 mmHigh-Speed Steel3.2 mm58 mm80 mm4—0 mm to 0.075 mm1:50Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    4 mm5.2600 mm3.9000 mmHigh-Speed Steel4.0 mm68 mm93 mm4—0 mm to 0.075 mm1:50Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    5 mm6.3600 mm4.9000 mmHigh-Speed Steel5.0 mm73 mm100 mm4—0 mm to 0.075 mm1:50Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    6 mm8.0000 mm5.9000 mmHigh-Speed Steel6.3 mm105 mm135 mm6—0 mm to 0.125 mm1:50Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000
    8 mm10.8000 mm7.9000 mmHigh-Speed Steel8.0 mm145 mm180 mm6—0 mm to 0.125 mm1:50Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000
    10 mm13.4000 mm9.9000 mmHigh-Speed Steel10.0 mm175 mm215 mm6—0 mm to 0.125 mm1:50Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000
    12 mm16.0000 mm11.8000 mmHigh-Speed Steel11.2 mm210 mm255 mm8—0 mm to 0.125 mm1:50Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000
    13 mm16.7400 mm12.8600 mmHigh-Speed Steel12.5 mm210 mm255 mm8—0 mm to 0.125 mm1:50Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000
    16 mm20.4000 mm15.8000 mmHigh-Speed Steel14.0 mm230 mm280 mm8—0 mm to 0.125 mm1:50Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000
    20 mm24.8000 mm19.8000 mmHigh-Speed Steel18.0 mm250 mm310 mm8—0 mm to 0.125 mm1:50Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000000
     
    Spiral Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Taper-Pin Holes, Square Shank, Spiral Flute.
     
    Inch
    7/00.0666"0.0497"High-Speed Steel0.0600"13/16"1 13/16"4Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    6/00.0806"0.0611"High-Speed Steel0.0700"15/16"1 15/16"4Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    5/00.0966"0.0719"High-Speed Steel0.0800"1 3/16"2 3/16"4Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    4/00.1142"0.0869"High-Speed Steel0.0950"1 5/16"2 5/16"4Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    3/00.1302"0.1029"High-Speed Steel0.1050"1 5/16"2 5/16"4Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    2/00.1462"0.1137"High-Speed Steel0.1150"1 9/16"2 9/16"4Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    00.1638"0.1287"High-Speed Steel0.1300"1 11/16"2 15/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    10.1798"0.1447"High-Speed Steel0.1400"1 11/16"2 15/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    20.2008"0.1605"High-Speed Steel0.1500"1 15/16"3 3/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    30.2294"0.1813"High-Speed Steel0.1750"2 5/16"3 11/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    40.2604"0.2071"High-Speed Steel0.2000"2 9/16"4 1/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    50.2994"0.2409"High-Speed Steel0.2350"2 13/16"4 5/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    60.3540"0.2773"High-Speed Steel0.2700"3 11/16"5 7/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    70.4220"0.3297"High-Speed Steel0.3050"4 7/16"6 5/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    80.5050"0.3971"High-Speed Steel0.3300"5 3/16"7 3/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    90.6066"0.4805"High-Speed Steel0.4200"6 1/16"8 5/16"8Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    100.7216"0.5799"High-Speed Steel0.4700"6 13/16"9 5/16"8Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    110.8780"0.7060"High-Speed Steel0.5600"8 1/4"11 1/4"8Left Hand0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    121.0500"0.8420"High-Speed Steel0.5600"10"13 7/8"8Left Hand0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    131.2590"1.0090"High-Speed Steel0.7950"12"16"10Left Hand0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    141.5420"1.2500"High-Speed Steel1.0800"14"18 1/4"10Left Hand0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     

    Reamers for Taper Pipe

    Use these reamers to shape and finish a hole to a tapered pipe size before tapping.
    Square Shank
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Taper Pipe, Square Shank, Spiral Flute.

    Spiral Flute

    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Lg.
    For Pipe
    Size
    Reamer Dia.
    (A)
    Reamer Dia.
    (B)
    Material
    Square Shank
    Size
    Flute
    Overall
    No. of
    Flutes
    Spiral
    Direction
    Cutting Dia.
    Tolerance
    For Use On
    Each
    Spiral Flute
     
    Inch
    1/8
    		0.3620"0.3160"High-Speed Steel0.3280"3/4"2 1/8"6Left Hand-0.001" to 0.001"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1/4
    		0.4720"0.4060"High-Speed Steel0.4210"1 1/16"2 7/16"6Left Hand-0.001" to 0.001"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    3/8
    		0.6060"0.5400"High-Speed Steel0.5310"1 1/16"2 9/16"6Left Hand-0.001" to 0.001"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    1/2
    		0.7510"0.6650"High-Speed Steel0.5150"1 3/8"3 1/8"6Left Hand-0.001" to 0.001"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    3/4
    		0.9620"0.8760"High-Speed Steel0.6790"1 3/8"3 1/4"8Left Hand-0.001" to 0.001"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1
    		1.2120"1.1030"High-Speed Steel0.8430"1 3/4"3 3/4"10Left Hand-0.001" to 0.001"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     

    Reamers for Morse Taper-Socket Holes

    Use these reamers to turn straight holes into Morse taper-socket holes that can hold cutting tools or adapters in machine spindles. They're also good for finishing existing Morse taper holes and removing nicks and burrs from spindles.
    Square Shank
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Morse Taper-Socket Holes, Square Shank, Straight Flute.

    Straight Flute

    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Reamers
    Optional
    Straight-Handle Tap Wrenches
    Lg.
    For Machine
    Taper No.
    Reamer Dia.
    (A)
    Reamer Dia.
    (B)
    Material
    Square Shank
    Size
    Flute
    Overall
    No. of
    Flutes
    Cutting Dia.
    Tolerance
    For Use On
    Each
    Each
    Straight Flute
     
    Inch
    Morse 00.3670"0.2500"High-Speed Steel0.2350"2 1/4"3 3/4"6-0.0005" to 0.0005"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    Morse 10.5170"0.3670"High-Speed Steel0.3300"3"5"6-0.0005" to 0.0005"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000000000000000
    Morse 20.7450"0.5690"High-Speed Steel0.4700"3 1/2"6"8-0.0005" to 0.0005"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000000000000000
    Morse 30.9880"0.7750"High-Speed Steel0.6550"4 1/4"7 1/4"8-0.0005" to 0.0005"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    Morse 41.2890"1.0170"High-Speed Steel0.8450"5 1/4"8 1/2"10-0.0005" to 0.0005"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    Morse 51.7990"1.4710"High-Speed Steel1.1250"6 1/4"9 3/4"10-0.0005" to 0.0005"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
     

    Reamer Sets

    Keep a variety of reamer sizes on hand for finishing holes.
    Adjustable Size, Square Shank
    Image of Product. Front orientation. Reamers. Reamer Sets, Adjustable Size, Square Shank.
    Work on a wide range of hole diameters by keeping a set of adjustable reamers on hand. Each reamer can finish multiple hole sizes by moving the adjustable blades within the diameter range. Convenient for maintenance work, these don't require powered tools. They're often used to make precise size adjustments during installation of bearings and bushings.
    Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Straight Blade—Use these reamers in straight holes that don't have a keyway or other breaks in the surface.
    Angled Blade—These reamers are better than those with straight blades for finishing holes with breaks in the surface, such as a keyway.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Tool Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
    Sizes Included
    No. of
    Pieces
    Material
    Container
    Type
    For Use On
    Each
    Straight Blade
     
    Inch
    1/4"-15/32"7High-Speed SteelWood CaseAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000000
     
    Angled Blade
     
    Inch
    7/16"-1 1/4"10Tool Steel
    		Wood CaseAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000000
    15/32"-1 1/16"8Tool Steel
    		Wood CaseAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000000
    15/32"-1 17/32"11Tool Steel
    		Wood CaseAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000000
     

    Reamer Sets for Taper-Pin Holes

    Used for shaping holes to match the profile of taper pins, these sets include a variety of reamer sizes. Drill a hole that matches the size of the small end of the taper pin you want to install, and then ream to taper and finish the hole.
    Square Shank
    Image of Product. Front orientation. Reamers. Reamer Sets for Taper-Pin Holes, Square Shank.
    Turn these reamers by hand with an adjustable wrench, straight-handle tap wrench, or pin vise (sold separately).
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Sizes
    Included
    No. of
    Pieces
    Material
    Spiral
    Direction
    Rate of
    Taper
    Container
    Type
    For Use On
    Each
    Straight Flute
     
    Inch
    7/0-07High-Speed Steel—1:48Plastic CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000
    0-56High-Speed Steel—1:48Plastic CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0-1011High-Speed Steel—1:48Plastic CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     
    Spiral Flute
     
    Inch
    7/0-07High-Speed SteelLeft Hand1:48Plastic CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0-56High-Speed SteelLeft Hand1:48Plastic CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0-1011High-Speed SteelLeft Hand1:48Plastic CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     

    Reamers for Hole Alignment

    Enlarge holes to correct misalignment and overlap. Misaligned holes often have a narrow entry, so the tapered shape is easier to insert and makes more contact to remove the overlapping material. These are also known as bridge and car reamers.
    Adjustable Size, Square Shank
    Image of Product. Front orientation. Reamers. Reamers for Hole Alignment, Adjustable Size, Square Shank, Angled Blade.

    Angled Blade

    One tool both finishes multiple diameters and enlarges holes to correct misalignment and overlap. Also known as bridge and car reamers, they have a tapered shape that fits into the narrow entry of misaligned holes and makes more contact to remove the overlapping material. Change the reamer size by moving the adjustable blades within the diameter range.
    Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Angled Blade—These reamers are better than those with straight blades for finishing holes with breaks in the surface, such as a keyway.
    Tool Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
    Long Reach—Align holes spaced far apart with reamers that have a long, built-in pilot. A floating sleeve guides and steadies the pilot through holes.
    Reamers
    Replacement Blades
    Lg.
    Reamer Dia.
    Material
    Square Shank
    Size
    Pilot
    Overall
    No. of
    Blades
    Performance
    For Use On
    Each
    Pkg.
    Qty.
    Pkg.
    Angled Blade
     
    Inch
    0.4688" to 0.5313" (15/32" to 17/32")Tool Steel
    		0.1870"10"15 5/8"6Long ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000060000000000000
    0.5313" to 0.5938" (17/32" to 19/32")Tool Steel
    		0.2180"10"15 5/8"6Long ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
    0.5938" to 0.6563" (19/32" to 21/32")Tool Steel
    		0.2810"12"18 5/8"6Long ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
    0.7188" to 0.7813" (23/32" to 25/32")Tool Steel
    		0.3430"16"23 1/8"6Long ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
    0.7813" to 0.8438" (25/32" to 27/32")Tool Steel
    		0.4060"16"23 1/2"6Long ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
    0.9375" to 1.0625" (15/16" to 1 1/16")Tool Steel
    		0.5000"18"27 1/8"6Long ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
     
    back to top