McMaster-Carr logo
    Filter by
    System of Measurement
    Flute Type
    Reamer Operation
    Number of Flutes
    Blade Shape
    Spiral Direction
    Number of Blades
    Rate of Taper
    Number of Pieces
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    263 Products

    Reamers

    Finish holes to precise inch, metric, wire gauge, or letter sizes with these reamers.
    Square Shank
    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Lg.
    Reamer Dia.
    Material
    Square
    Shank
    Size
    Flute
    Overall
    No. of
    Flutes
    Spiral
    Direction
    Cutting Dia.
    Tolerance
    For Use On
    Each
    Straight Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers, Square Shank, Straight Flute.
     
    Inch
    0.1250" (1/8")High-Speed Steel0.095"1 1/2"3"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1875" (3/16")High-Speed Steel0.144"1 3/4"3 1/2"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2500" (1/4")High-Speed Steel0.185"2"4"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.3125" (5/16")High-Speed Steel0.235"2 1/4"4 1/2"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.3750" (3/8")High-Speed Steel0.280"2 1/2"5"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.4375" (7/16")High-Speed Steel0.330"2 3/4"5 1/2"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.5000" (1/2")High-Speed Steel0.375"3"6"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.5625" (9/16")High-Speed Steel0.420"3 1/4"6 1/2"8__0" to 0.0003"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.6250" (5/8")High-Speed Steel0.470"3 1/2"7"8__0" to 0.0003"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.6875" (11/16")High-Speed Steel0.515"3 7/8"7 3/4"8__0.0001" to 0.0004"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.7500" (3/4")High-Speed Steel0.560"4 3/16"8 3/8"8__0.0001" to 0.0004"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.8750" (7/8")High-Speed Steel0.655"4 7/8"9 3/4"8__0.0001" to 0.0004"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.9375" (15/16")High-Speed Steel0.705"5 1/8"10 1/4"8__0.0001" to 0.0004"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1.0000" (1")High-Speed Steel0.750"5 7/16"10 7/8"8__0.0001" to 0.0004"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1.1250" (1 1/8")High-Speed Steel0.845"5 13/16"11 5/8"8__0.0001" to 0.0004"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1.2500" (1 1/4")High-Speed Steel0.935"6 1/8"12 1/4"10__0.0001" to 0.0004"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     
    Spiral Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers, Square Shank, Spiral Flute.
     
    Inch
    0.1250" (1/8")High-Speed Steel0.095"1 1/2"3"4Left Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1875" (3/16")High-Speed Steel0.140"1 3/4"3 1/2"6Left Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2500" (1/4")High-Speed Steel0.185"2"4"6Left Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.3125" (5/16")High-Speed Steel0.235"2 1/4"4 1/2"6Left Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.3750" (3/8")High-Speed Steel0.280"2 1/2"5"6Left Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.4375" (7/16")High-Speed Steel0.330"2 3/4"5 1/2"6Left Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.5000" (1/2")High-Speed Steel0.375"3"6"6Left Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.5625" (9/16")High-Speed Steel0.420"3 1/4"6 1/2"8Left Hand0" to 0.0003"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.6250" (5/8")High-Speed Steel0.470"3 1/2"7"8Left Hand0" to 0.0003"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.6875" (11/16")High-Speed Steel0.515"3 7/8"7 3/4"8Left Hand0.0001" to 0.0004"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.7500" (3/4")High-Speed Steel0.560"4 3/16"8 3/8"8Left Hand0.0001" to 0.0004"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.8750" (7/8")High-Speed Steel0.655"4 7/8"9 3/4"8Left Hand0.0001" to 0.0004"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.9375" (15/16")High-Speed Steel0.705"5 1/8"10 1/4"8Left Hand0.0001" to 0.0004"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1.0000" (1")High-Speed Steel0.750"5 7/16"10 7/8"8Left Hand0.0001" to 0.0004"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1.1250" (1 1/8")High-Speed Steel0.845"5 13/16"11 5/8"8Left Hand0.0001" to 0.0004"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1.2500" (1 1/4")High-Speed Steel0.935"6 1/8"12 1/4"10Left Hand0.0001" to 0.0004"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     
    Adjustable Size, Square Shank
    Finish multiple hole sizes with one reamer by moving the adjustable blades within the diameter range. Convenient for maintenance work, these have a large diameter range and don't require powered tools. They're often used to make precise size adjustments during installation of bearings and bushings.
    Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Extension pilots (not included) can be used in place of the end adjustment nut to align holes that are spaced far apart.
    Straight Blade—Use these reamers in straight holes that don't have a keyway or other breaks in the surface.
    Angled Blade—These reamers are better than those with straight blades for finishing holes with breaks in the surface, such as a keyway.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Tool Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
    Replacement Blades
    Optional
    Extension Pilots
    Reamer Dia.
    Material
    Square Shank
    Size
    Overall
    Lg.
    No. of
    Blades
    For Use On
    Each
    Pkg.
    Qty.
    Pkg.
    Each
    Straight Blade
    Image of Product. Front orientation. Reamers. Reamers, Adjustable Size, Square Shank, Straight Blade.
     
    Inch
    0.2500" to 0.2813" (1/4" to 9/32")High-Speed Steel0.1160"3 1/4"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000000400000000000000000000000000
    0.2813" to 0.3125" (9/32" to 5/16")High-Speed Steel0.1250"3 5/8"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000004000000000000000000000000
    0.3125" to 0.3438" (5/16" to 11/32")High-Speed Steel0.1560"4"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000004000000000000000000000000
    0.3438" to 0.3750" (11/32" to 3/8")High-Speed Steel0.1560"4 1/4"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000004000000000000000000000000
    0.3750" to 0.4063" (3/8" to 13/32")High-Speed Steel0.1710"4 1/2"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000004000000000000000000000000
    0.4063" to 0.4375" (13/32" to 7/16")High-Speed Steel0.1870"4 3/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000060000000000000000000000000
    0.4375" to 0.4688" (7/16" to 15/32")High-Speed Steel0.1870"5 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000060000000000000000000000000
    0.4688" to 0.5313" (15/32" to 17/32")High-Speed Steel0.1870"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.5313" to 0.5938" (17/32" to 19/32")High-Speed Steel0.2180"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.5938" to 0.6563" (19/32" to 21/32")High-Speed Steel0.2810"6 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.6563" to 0.7188" (21/32" to 23/32")High-Speed Steel0.3120"6 7/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.7188" to 0.7813" (23/32" to 25/32")High-Speed Steel0.3430"7 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.7813" to 0.8438" (25/32" to 27/32")High-Speed Steel0.4060"7 1/2"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.8438" to 0.9375" (27/32" to 15/16")High-Speed Steel0.4370"8 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.9375" to 1.0625" (15/16" to 1 1/16")High-Speed Steel0.5000"9 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    1.0625" to 1.1875" (1 1/16" to 1 3/16")High-Speed Steel0.5310"10 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    1.1875" to 1.3438" (1 3/16" to 1 11/32")High-Speed Steel0.6250"11 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    1.3438" to 1.5313" (1 11/32" to 1 17/32")High-Speed Steel0.6400"12"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000600000000000000000000000000
    1.5313" to 1.7813" (1 17/32" to 1 25/32")High-Speed Steel0.7500"14 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000600000000000000000000000000
    1.7813" to 2.0938" (1 25/32" to 2 3/32")High-Speed Steel0.9370"16"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000600000000000000000000000000
    2.0938" to 2.4688" (2 3/32" to 2 15/32")High-Speed Steel1.1870"18"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000600000000000000000000000000
    2.1875" to 2.5625" (2 3/16" to 2 9/16")Tool Steel1.2500"18"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    2.5625" to 3.0000" (2 9/16" to 3")Tool Steel1.4680"20"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
     
    Angled Blade
    Image of Product. Front orientation. Reamers. Reamers, Adjustable Size, Square Shank, Angled Blade.
     
    Inch
    0.4219" to 0.4531" (27/64" to 29/64")Tool Steel0.1870"5 3/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.4219" to 0.4688" (27/64" to 15/32")Tool Steel0.1870"5 3/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000600000000000000000000000
    0.4375" to 0.5000" (7/16" to 1/2")Tool Steel0.1870"5 3/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.4688" to 0.5313" (15/32" to 17/32")Tool Steel0.1870"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.5000" to 0.5625" (1/2" to 9/16")Tool Steel0.2180"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000600000000000000000000000
    0.5313" to 0.5938" (17/32" to 19/32")Tool Steel0.2180"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.5625" to 0.6250" (9/16" to 5/8")Tool Steel0.2640"5 7/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.5938" to 0.6563" (19/32" to 21/32")Tool Steel0.2810"6 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.6250" to 0.6875" (5/8" to 11/16")Tool Steel0.2810"6 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.6563" to 0.7188" (21/32" to 23/32")Tool Steel0.3120"6 7/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.6875" to 0.7500" (11/16" to 3/4")Tool Steel0.3120"6 7/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.7188" to 0.7813" (23/32" to 25/32")Tool Steel0.3430"7 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.7500" to 0.8125" (3/4" to 13/16")Tool Steel0.3430"7 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.7813" to 0.8438" (25/32" to 27/32")Tool Steel0.4060"7 1/2"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.8125" to 0.8750" (13/16" to 7/8")Tool Steel0.4060"7 1/2"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.8438" to 0.9375" (27/32" to 15/16")Tool Steel0.4370"8 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.8750" to 1.0000" (7/8" to 1")Tool Steel0.4370"8 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.9375" to 1.0625" (15/16" to 1 1/16")Tool Steel0.5000"9 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    1.0000" to 1.1250" (1" to 1 1/8")Tool Steel0.5000"9 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    1.0625" to 1.1875" (1 1/16" to 1 3/16")Tool Steel0.5310"10 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    1.1250" to 1.2500" (1 1/8" to 1 1/4")Tool Steel0.5490"10 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    1.1875" to 1.3438" (1 3/16" to 1 11/32")Tool Steel0.6250"11 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000600000000000000000000000
    1.2500" to 1.4375" (1 1/4" to 1 7/16")Tool Steel0.6250"11 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    1.3438" to 1.5313" (1 11/32" to 1 17/32")Tool Steel0.6400"12"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    1.4375" to 1.6250" (1 7/16" to 1 5/8")Tool Steel0.7500"12"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000060000000000000000000000000
    1.5313" to 1.7813" (1 17/32" to 1 25/32")Tool Steel0.7500"14 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    1.6250" to 1.8750" (1 5/8" to 1 7/8")Tool Steel0.8750"14 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    1.7813" to 2.0938" (1 25/32" to 2 3/32")Tool Steel0.9370"16"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    1.8750" to 2.1875" (1 7/8" to 2 3/16")Tool Steel1.0320"16"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    2.0938" to 2.4688" (2 3/32" to 2 15/32")Tool Steel1.1870"18"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
     
    Expandable Flutes, Square Shank
    Unlike standard reamers, which are unusable once they become worn, these can be returned to their original size for finishing holes. After the reamer is worn down, tighten the set screw to expand the diameter, grind the reamer to its original size, and get back to work.
    These are not designed for producing holes larger than the listed diameter or for producing holes of various sizes. The set screw should not be loosened.
    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Lg.
    Optional
    Straight-Handle Tap Wrenches
    Reamer Dia.
    Material
    Square
    Shank
    Size
    Flute
    Overall
    No. of
    Flutes
    Spiral
    Direction
    Cutting Dia.
    Tolerance
    Recommended
    Expansion
    Limit
    For Use On
    Each
    Each
    Straight Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers, Expandable Flutes, Square Shank, Straight Flute.
     
    Inch
    0.2500" (1/4")High-Speed Steel0.185"1 7/16"4 1/4"6__-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000000000000000000
    0.3125" (5/16")High-Speed Steel0.235"1 3/4"4 1/2"6__-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000000000000000
    0.3750" (3/8")High-Speed Steel0.280"1 3/4"5"6__-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000000000000000
    0.5000" (1/2")High-Speed Steel0.375"1 13/16"5 1/2"6__-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000000000000000
    0.6250" (5/8")High-Speed Steel0.470"2 1/2"6 1/2"6__-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000000000000000
    0.7500" (3/4")High-Speed Steel0.560"2 11/16"7 1/16"8__-0.0005" to 0"0.013"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    0.8750" (7/8")High-Speed Steel0.655"3 5/16"8"8__-0.0005" to 0"0.013"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    1.0000" (1")High-Speed Steel0.750"3 3/4"8 7/8"8__-0.0005" to 0"0.013"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
     
    Spiral Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers, Expandable Flutes, Square Shank, Spiral Flute.
     
    Inch
    0.2500" (1/4")High-Speed Steel0.185"1 7/16"4 1/4"6Left Hand-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000000000000000
    0.3125" (5/16")High-Speed Steel0.235"1 3/4"4 1/2"6Left Hand-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000000000000000
    0.3750" (3/8")High-Speed Steel0.280"1 3/4"5"6Left Hand-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000000000000000
    0.5000" (1/2")High-Speed Steel0.375"1 13/16"5 1/2"6Left Hand-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000000000000000
    0.6250" (5/8")High-Speed Steel0.470"2 1/2"6 1/2"6Left Hand-0.0005" to 0"0.010"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000000000000000
    0.7500" (3/4")High-Speed Steel0.560"2 11/16"7 1/16"8Left Hand-0.0005" to 0"0.013"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    0.8750" (7/8")High-Speed Steel0.655"3 5/16"8"8Left Hand-0.0005" to 0"0.013"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    1.0000" (1")High-Speed Steel0.750"3 3/4"8 7/8"8Left Hand-0.0005" to 0"0.013"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
     

    Reamers for Hole Alignment

    Enlarge holes to correct misalignment and overlap. Misaligned holes often have a narrow entry, so the tapered shape is easier to insert and makes more contact to remove the overlapping material. These are also known as bridge and car reamers.
    Adjustable Size, Square Shank
    Image of Product. Front orientation. Reamers. Reamers for Hole Alignment, Adjustable Size, Square Shank, Angled Blade.

    Angled Blade

    One tool both finishes multiple diameters and enlarges holes to correct misalignment and overlap. Also known as bridge and car reamers, they have a tapered shape that fits into the narrow entry of misaligned holes and makes more contact to remove the overlapping material. Change the reamer size by moving the adjustable blades within the diameter range.
    Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Angled Blade—These reamers are better than those with straight blades for finishing holes with breaks in the surface, such as a keyway.
    Tool Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
    Extended Reach—Align holes spaced far apart with reamers that have a long, built-in pilot. A floating sleeve guides and steadies the pilot through holes.
    Lg.
    Replacement Blades
    Reamer Dia.
    Material
    Square Shank
    Size
    Pilot
    Overall
    No. of
    Blades
    Performance
    For Use On
    Each
    Pkg.
    Qty.
    Pkg.
    Angled Blade
     
    Inch
    0.4688" to 0.5313" (15/32" to 17/32")Tool Steel0.1870"10"15 5/8"6Extended ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000060000000000000
    0.5313" to 0.5938" (17/32" to 19/32")Tool Steel0.2180"10"15 5/8"6Extended ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
    0.5938" to 0.6563" (19/32" to 21/32")Tool Steel0.2810"12"18 5/8"6Extended ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
    0.7188" to 0.7813" (23/32" to 25/32")Tool Steel0.3430"16"23 1/8"6Extended ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
    0.7813" to 0.8438" (25/32" to 27/32")Tool Steel0.4060"16"23 1/2"6Extended ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
    0.9375" to 1.0625" (15/16" to 1 1/16")Tool Steel0.5000"18"27 1/8"6Extended ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
     

    Reamers for Taper-Pin Holes
    3D CAD models available

    Shape holes to match the profile of taper pins. After drilling a hole that matches the size of the small end of the taper pin you want to install, use these reamers to taper and finish the hole.
    Square Shank
    Turn these reamers by hand with an adjustable wrench, straight-handle tap wrench, or pin vise (sold separately).
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Lg.
    For Taper
    Pin No.
    Reamer Dia.
    (A)
    Reamer Dia.
    (B)
    Material
    Square Shank
    Size
    Flute
    Overall
    No. of
    Flutes
    Spiral
    Direction
    Cutting Dia.
    Tolerance
    Rate of
    Taper
    For Use On
    Each
    Straight Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Taper-Pin Holes, Square Shank, Straight Flute.
     
    Inch
    7/00.0666"0.0497"High-Speed Steel0.0600"13/16"1 13/16"4__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    6/00.0806"0.0611"High-Speed Steel0.0700"15/16"1 15/16"4__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    5/00.0966"0.0719"High-Speed Steel0.0800"1 3/16"2 3/16"4__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    4/00.1142"0.0869"High-Speed Steel0.0950"1 5/16"2 5/16"4__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    3/00.1302"0.1029"High-Speed Steel0.1050"1 5/16"2 5/16"4__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    2/00.1462"0.1137"High-Speed Steel0.1150"1 9/16"2 9/16"4__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    00.1638"0.1287"High-Speed Steel0.1300"1 11/16"2 15/16"6__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    10.1798"0.1447"High-Speed Steel0.1400"1 11/16"2 15/16"6__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    20.2008"0.1605"High-Speed Steel0.1500"1 15/16"3 3/16"6__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    30.2294"0.1813"High-Speed Steel0.1750"2 5/16"3 11/16"6__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    40.2604"0.2071"High-Speed Steel0.2000"2 9/16"4 1/16"6__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    50.2994"0.2409"High-Speed Steel0.2350"2 13/16"4 5/16"6__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    60.3540"0.2773"High-Speed Steel0.2700"3 11/16"5 7/16"6__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    70.4220"0.3297"High-Speed Steel0.3050"4 7/16"6 5/16"6__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    80.5050"0.3971"High-Speed Steel0.3300"5 3/16"7 3/16"6__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    90.6066"0.4805"High-Speed Steel0.4200"6 1/16"8 5/16"8__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    100.7216"0.5799"High-Speed Steel0.4700"6 13/16"9 5/16"8__-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    110.8780"0.7060"High-Speed Steel0.5600"8 1/4"11 1/4"8__0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    121.0500"0.8420"High-Speed Steel0.5600"10"13 7/8"8__0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    131.2590"1.0090"High-Speed Steel0.7950"12"16"10__0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    141.5420"1.2500"High-Speed Steel1.0800"14"18 1/4"10__0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     
    Spiral Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Taper-Pin Holes, Square Shank, Spiral Flute.
     
    Inch
    7/00.0666"0.0497"High-Speed Steel0.0600"13/16"1 13/16"4Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    6/00.0806"0.0611"High-Speed Steel0.0700"15/16"1 15/16"4Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    5/00.0966"0.0719"High-Speed Steel0.0800"1 3/16"2 3/16"4Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    4/00.1142"0.0869"High-Speed Steel0.0950"1 5/16"2 5/16"4Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    3/00.1302"0.1029"High-Speed Steel0.1050"1 5/16"2 5/16"4Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    2/00.1462"0.1137"High-Speed Steel0.1150"1 9/16"2 9/16"4Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    00.1638"0.1287"High-Speed Steel0.1300"1 11/16"2 15/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    10.1798"0.1447"High-Speed Steel0.1400"1 11/16"2 15/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    20.2008"0.1605"High-Speed Steel0.1500"1 15/16"3 3/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    30.2294"0.1813"High-Speed Steel0.1750"2 5/16"3 11/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    40.2604"0.2071"High-Speed Steel0.2000"2 9/16"4 1/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    50.2994"0.2409"High-Speed Steel0.2350"2 13/16"4 5/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    60.3540"0.2773"High-Speed Steel0.2700"3 11/16"5 7/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    70.4220"0.3297"High-Speed Steel0.3050"4 7/16"6 5/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    80.5050"0.3971"High-Speed Steel0.3300"5 3/16"7 3/16"6Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    90.6066"0.4805"High-Speed Steel0.4200"6 1/16"8 5/16"8Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    100.7216"0.5799"High-Speed Steel0.4700"6 13/16"9 5/16"8Left Hand-0.001" to 0.001"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    110.8780"0.7060"High-Speed Steel0.5600"8 1/4"11 1/4"8Left Hand0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    121.0500"0.8420"High-Speed Steel0.5600"10"13 7/8"8Left Hand0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    131.2590"1.0090"High-Speed Steel0.7950"12"16"10Left Hand0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    141.5420"1.2500"High-Speed Steel1.0800"14"18 1/4"10Left Hand0" to 0.5"1:48Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000000
     

    Reamers for Taper Pipe
    3D CAD models available

    Use these reamers to shape and finish a hole to a tapered pipe size before tapping.
    Square Shank
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Taper Pipe, Square Shank, Spiral Flute.

    Spiral Flute

    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Lg.
    For Pipe
    Size
    Reamer Dia.
    (A)
    Reamer Dia.
    (B)
    Material
    Square Shank
    Size
    Flute
    Overall
    No. of
    Flutes
    Spiral
    Direction
    Cutting Dia.
    Tolerance
    For Use On
    Each
    Spiral Flute
     
    Inch
    1/8
    0.3620"0.3160"High-Speed Steel0.3280"3/4"2 1/8"6Left Hand-0.001" to 0.001"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1/4
    0.4720"0.4060"High-Speed Steel0.4210"1 1/16"2 7/16"6Left Hand-0.001" to 0.001"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    3/8
    0.6060"0.5400"High-Speed Steel0.5310"1 1/16"2 9/16"6Left Hand-0.001" to 0.001"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    1/2
    0.7510"0.6650"High-Speed Steel0.5150"1 3/8"3 1/8"6Left Hand-0.001" to 0.001"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    3/4
    0.9620"0.8760"High-Speed Steel0.6790"1 3/8"3 1/4"8Left Hand-0.001" to 0.001"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1
    1.2120"1.1030"High-Speed Steel0.8430"1 3/4"3 3/4"10Left Hand-0.001" to 0.001"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     

    Reamers for Morse Taper-Socket Holes
    3D CAD models available

    Use these reamers to turn straight holes into Morse taper-socket holes that can hold cutting tools or adapters in machine spindles. They're also good for finishing existing Morse taper holes and removing nicks and burrs from spindles.
    Square Shank
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Morse Taper-Socket Holes, Square Shank, Straight Flute.

    Straight Flute

    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Lg.
    Optional
    Straight-Handle Tap Wrenches
    For Machine
    Taper No.
    Reamer Dia.
    (A)
    Reamer Dia.
    (B)
    Material
    Square Shank
    Size
    Flute
    Overall
    No. of
    Flutes
    Cutting Dia.
    Tolerance
    For Use On
    Each
    Each
    Straight Flute
     
    Inch
    Morse 00.3670"0.2500"High-Speed Steel0.2350"2 1/4"3 3/4"6-0.0005" to 0.0005"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    Morse 10.5170"0.3670"High-Speed Steel0.3300"3"5"6-0.0005" to 0.0005"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000000000000000
    Morse 20.7450"0.5690"High-Speed Steel0.4700"3 1/2"6"8-0.0005" to 0.0005"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000000000000000
    Morse 30.9880"0.7750"High-Speed Steel0.6550"4 1/4"7 1/4"8-0.0005" to 0.0005"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    Morse 41.2890"1.0170"High-Speed Steel0.8450"5 1/4"8 1/2"10-0.0005" to 0.0005"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
    Morse 51.7990"1.4710"High-Speed Steel1.1250"6 1/4"9 3/4"10-0.0005" to 0.0005"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000000000000000
     

    Reamers for Deburring

    Smooth the inside and edges of holes with these reamers. Often used to finish holes in sheet metal or to remove burrs from the ends of cut pipe and conduit, they're also known as repairmen's reamers.
    T-Handle Shank
    No additional tools required, these reamers have an integrated handle that's easy to grip and turn.
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Lg.
    For Pipe
    Size
    Reamer Dia. (B to A)
    Material
    Flute
    Overall
    No. of
    Flutes
    Spiral
    Direction
    Cutting Dia.
    Tolerance
    For Deburring
    For Use On
    Each
    Straight Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Deburring, T-Handle Shank, Straight Flute.
     
    Inch
    __0.1250" to 0.5000" (1/8" to 1/2")High-Speed Steel3 5/8"5 9/16"6__-0.003" to 0.003"Sheet EdgesAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
     
    Spiral Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Deburring, T-Handle Shank, Spiral Flute.
     
    Inch
    1/4 to 20.2500" to 2.2656" (1/4" to 2 17/64")High-Speed Steel3 7/8"5 7/8"12Left Hand-0.003" to 0.003"Inner Pipe Edges, Inner Tube Edges, Inner Conduit Edges, Sheet EdgesAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     
    L-Handle Shank
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Deburring, L-Handle Shank, Straight Flute.
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers for Deburring, L-Handle Shank, Spiral Flute.

    Straight Flute

    Spiral Flute

    Turn these reamers with the long ratcheting handle, which provides more leverage than a T-handle.
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    Hardened Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
    Right-Hand Spiral—These reamers pull chips upward as they cut, so they're often used in blind holes.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Lg.
    For Pipe
    Size
    Reamer Dia. (B to A)
    Material
    Flute
    Reamer
    Handle
    Ratcheting
    Handle
    No. of
    Flutes
    Spiral
    Direction
    For Deburring
    For Use On
    Each
    Straight Flute
     
    Inch
    1/8 to 20.2500" to 2.2500" (1/4" to 2 1/4")Hardened Steel6 3/8"6 5/8"16"5__Inner Pipe Edges, Inner Tube Edges, Inner Conduit EdgesAluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel00000000000000
    3/8 to 30.3750" to 3.2500" (3/8" to 3 1/4")Hardened Steel9"10"16"5__Inner Pipe Edges, Inner Tube Edges, Inner Conduit EdgesAluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel0000000000000
     
    Spiral Flute
     
    Inch
    1/4 to 20.1875" to 2.2500" (3/16" to 2 1/4")Hardened Steel5 1/8"6 7/8"16"6Right HandInner Pipe Edges, Inner Tube Edges, Inner Conduit EdgesAluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel0000000000000
    2 1/2 to 42.3125" to 4.2500" (2 5/16" to 4 1/4")Hardened Steel7"10 1/2"16"9Left HandInner Pipe Edges, Inner Tube Edges, Inner Conduit EdgesAluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel0000000000000
     

    Reamer Sets

    Keep a variety of reamer sizes on hand for finishing holes.
    Adjustable Size, Square Shank
    Image of Product. Front orientation. Reamers. Reamer Sets, Adjustable Size, Square Shank.
    Work on a wide range of hole diameters by keeping a set of adjustable reamers on hand. Each reamer can finish multiple hole sizes by moving the adjustable blades within the diameter range. Convenient for maintenance work, these don't require powered tools. They're often used to make precise size adjustments during installation of bearings and bushings.
    Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Straight Blade—Use these reamers in straight holes that don't have a keyway or other breaks in the surface.
    Angled Blade—These reamers are better than those with straight blades for finishing holes with breaks in the surface, such as a keyway.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Tool Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
    Sizes Included
    No. of
    Pieces
    Material
    Container
    Type
    For Use On
    Each
    Straight Blade
     
    Inch
    1/4"-15/32"7High-Speed SteelWood CaseAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000000
     
    Angled Blade
     
    Inch
    7/16"-1 1/4"10Tool SteelWood CaseAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000000
    15/32"-1 1/16"8Tool SteelWood CaseAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000
    15/32"-1 17/32"11Tool SteelWood CaseAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000000
     

    Reamer Sets for Taper-Pin Holes
    3D CAD models available

    Used for shaping holes to match the profile of taper pins, these sets include a variety of reamer sizes. Drill a hole that matches the size of the small end of the taper pin you want to install, and then ream to taper and finish the hole.
    Square Shank
    Image of Product. Front orientation. Reamers. Reamer Sets for Taper-Pin Holes, Square Shank.
    Turn these reamers by hand with an adjustable wrench, straight-handle tap wrench, or pin vise (sold separately).
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
    Sizes
    Included
    No. of
    Pieces
    Material
    Spiral
    Direction
    Rate of
    Taper
    Container
    Type
    For Use On
    Each
    Straight Flute
     
    Inch
    7/0-07High-Speed Steel__1:48Plastic CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000
    0-56High-Speed Steel__1:48Plastic CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0-1011High-Speed Steel__1:48Plastic CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     
    Spiral Flute
     
    Inch
    7/0-07High-Speed SteelLeft Hand1:48Plastic CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0-56High-Speed SteelLeft Hand1:48Plastic CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0-1011High-Speed SteelLeft Hand1:48Plastic CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     
    back to top