McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    283 Products

    Reamers

    Finish holes to precise inch, metric, wire gauge, or letter sizes with these reamers.
    Round Shank
    These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Cobalt Steel—With better heat and wear resistance than high-speed steel, these reamers run up to 25% faster, last longer, and perform better on hard materials, such as cast iron, hardened steel, titanium, and stainless steel.
    Carbide—For the highest level of accuracy when cutting hard materials, these are our hardest, strongest, and most wear-resistant reamers. They're used on materials such as iron, hardened steel, steel alloys, and plastic. Their hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the reamer from breaking.
    Right-Hand Spiral—These reamers pull chips upward as they cut, so they're often used in blind holes.
    Lg.
    Reamer Dia.
    Material
    Flute
    Overall
    No. of
    Flutes
    Spiral
    Direction
    Cutting Dia.
    Tolerance
    For Use On
    Each
    Straight Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers, Round Shank, Straight Flute.
     
    Wire Gauge
    0.0135" (80)High-Speed Steel3/8"3/4"2—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000
    0.0135" (80)Cobalt Steel3/8"3/4"2—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0145" (79)High-Speed Steel3/8"3/4"2—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0145" (79)Cobalt Steel3/8"3/4"2—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0160" (78)High-Speed Steel3/8"7/8"2—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0160" (78)Cobalt Steel3/8"7/8"2—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0180" (77)High-Speed Steel3/8"7/8"2—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0180" (77)Cobalt Steel3/8"7/8"2—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0200" (76)High-Speed Steel3/8"7/8"2—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0200" (76)Cobalt Steel3/8"7/8"2—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0210" (75)High-Speed Steel1/2"1"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0210" (75)Cobalt Steel1/2"1"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0225" (74)High-Speed Steel1/2"1"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0225" (74)Cobalt Steel1/2"1"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0240" (73)High-Speed Steel1/2"1 1/8"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0240" (73)Cobalt Steel1/2"1 1/8"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0250" (72)High-Speed Steel1/2"1 1/8"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0250" (72)Cobalt Steel1/2"1 1/8"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0260" (71)High-Speed Steel1/2"1 1/4"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0260" (71)Cobalt Steel1/2"1 1/4"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0280" (70)High-Speed Steel1/2"1 1/4"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0280" (70)Cobalt Steel1/2"1 1/4"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0292" (69)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0292" (69)Cobalt Steel1/2"1 3/8"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0310" (68)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0310" (68)Cobalt Steel1/2"1 3/8"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0320" (67)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0320" (67)Cobalt Steel1/2"1 3/8"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0330" (66)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0330" (66)Cobalt Steel1/2"1 3/8"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0350" (65)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0350" (65)Cobalt Steel1/2"1 1/2"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0360" (64)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0360" (64)Cobalt Steel1/2"1 1/2"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0370" (63)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0370" (63)Cobalt Steel1/2"1 1/2"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0380" (62)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0380" (62)Cobalt Steel1/2"1 1/2"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0390" (61)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0390" (61)Cobalt Steel1/2"1 1/2"3—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000
    0.0390" (61)Carbide1/4"1 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0400" (60)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0400" (60)Cobalt Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0400" (60)Carbide1/4"1 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0410" (59)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0410" (59)Cobalt Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0410" (59)Carbide3/8"1 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0420" (58)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0420" (58)Cobalt Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0420" (58)Carbide3/8"1 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0430" (57)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0430" (57)Cobalt Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0430" (57)Carbide3/8"1 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0465" (56)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0465" (56)Cobalt Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0465" (56)Carbide3/8"1 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0520" (55)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0520" (55)Cobalt Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0520" (55)Carbide3/8"1 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0550" (54)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0550" (54)Cobalt Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0550" (54)Carbide3/8"1 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0595" (53)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0595" (53)Cobalt Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0595" (53)Carbide3/8"1 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0635" (52)High-Speed Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0635" (52)Cobalt Steel1/2"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0635" (52)Carbide3/8"1 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0670" (51)High-Speed Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0670" (51)Cobalt Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000
    0.0670" (51)Carbide1/2"1 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0700" (50)High-Speed Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0700" (50)Cobalt Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0700" (50)Carbide1/2"1 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0730" (49)High-Speed Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0730" (49)Cobalt Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0730" (49)Carbide1/2"1 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0760" (48)High-Speed Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0760" (48)Cobalt Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0760" (48)Carbide1/2"1 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0785" (47)High-Speed Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0785" (47)Cobalt Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0785" (47)Carbide1/2"1 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0810" (46)High-Speed Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0810" (46)Cobalt Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0810" (46)Carbide1/2"1 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0820" (45)High-Speed Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0820" (45)Cobalt Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0820" (45)Carbide1/2"2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0860" (44)High-Speed Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0860" (44)Cobalt Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0860" (44)Carbide1/2"2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0890" (43)High-Speed Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0890" (43)Cobalt Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0890" (43)Carbide1/2"2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0935" (42)High-Speed Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0935" (42)Cobalt Steel3/4"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0935" (42)Carbide1/2"2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0960" (41)High-Speed Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0960" (41)Cobalt Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0960" (41)Carbide1/2"2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0980" (40)High-Speed Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0980" (40)Cobalt Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0980" (40)Carbide5/8"2 1/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.0995" (39)High-Speed Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0995" (39)Cobalt Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.0995" (39)Carbide5/8"2 1/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1015" (38)High-Speed Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1015" (38)Cobalt Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1015" (38)Carbide5/8"2 1/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1040" (37)High-Speed Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1040" (37)Cobalt Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1040" (37)Carbide5/8"2 1/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1065" (36)High-Speed Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1065" (36)Cobalt Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1065" (36)Carbide5/8"2 1/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1100" (35)High-Speed Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1100" (35)Cobalt Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1100" (35)Carbide5/8"2 1/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1110" (34)High-Speed Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1110" (34)Cobalt Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1110" (34)Carbide5/8"2 1/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1130" (33)High-Speed Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1130" (33)Cobalt Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1130" (33)Carbide5/8"2 1/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1160" (32)High-Speed Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1160" (32)Cobalt Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1160" (32)Carbide5/8"2 1/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1200" (31)High-Speed Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1200" (31)Cobalt Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1200" (31)Carbide5/8"2 1/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1285" (30)High-Speed Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1285" (30)Cobalt Steel7/8"3 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000
    0.1285" (30)Carbide5/8"2 1/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1360" (29)High-Speed Steel1"4"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1360" (29)Cobalt Steel1"4"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1360" (29)Carbide3/4"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1405" (28)High-Speed Steel1"4"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1405" (28)Cobalt Steel1"4"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1405" (28)Carbide3/4"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1440" (27)High-Speed Steel1"4"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1440" (27)Cobalt Steel1"4"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1440" (27)Carbide3/4"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1470" (26)High-Speed Steel1"4"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1470" (26)Cobalt Steel1"4"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1470" (26)Carbide3/4"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1495" (25)High-Speed Steel1"4"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1495" (25)Cobalt Steel1"4"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1495" (25)Carbide3/4"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1520" (24)High-Speed Steel1"4"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1520" (24)Cobalt Steel1"4"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1520" (24)Carbide3/4"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1540" (23)High-Speed Steel1"4"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1540" (23)Cobalt Steel1"4"4—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1540" (23)Carbide3/4"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1570" (22)High-Speed Steel1"4"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1570" (22)Cobalt Steel1"4"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1570" (22)Carbide3/4"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1590" (21)High-Speed Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1590" (21)Cobalt Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1590" (21)Carbide3/4"2 1/2"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1610" (20)High-Speed Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1610" (20)Cobalt Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1610" (20)Carbide7/8"2 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1660" (19)High-Speed Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1660" (19)Cobalt Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1660" (19)Carbide7/8"2 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1695" (18)High-Speed Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1695" (18)Cobalt Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1695" (18)Carbide7/8"2 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1730" (17)High-Speed Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1730" (17)Cobalt Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1730" (17)Carbide7/8"2 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1770" (16)High-Speed Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1770" (16)Cobalt Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1770" (16)Carbide7/8"2 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1800" (15)High-Speed Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1800" (15)Cobalt Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1800" (15)Carbide7/8"2 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1820" (14)High-Speed Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1820" (14)Cobalt Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1820" (14)Carbide7/8"2 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1850" (13)High-Speed Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1850" (13)Cobalt Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1850" (13)Carbide7/8"2 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1890" (12)High-Speed Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1890" (12)Cobalt Steel1 1/8"4 1/2"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000
    0.1890" (12)Carbide7/8"2 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1910" (11)High-Speed Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1910" (11)Cobalt Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1910" (11)Carbide7/8"2 3/4"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1935" (10)High-Speed Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1935" (10)Cobalt Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1935" (10)Carbide1"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1960" (9)High-Speed Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1960" (9)Cobalt Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1960" (9)Carbide1"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.1990" (8)High-Speed Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1990" (8)Cobalt Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.1990" (8)Carbide1"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.2010" (7)High-Speed Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2010" (7)Cobalt Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.2010" (7)Carbide1"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.2040" (6)High-Speed Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2040" (6)Cobalt Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.2040" (6)Carbide1"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.2055" (5)High-Speed Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2055" (5)Cobalt Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.2055" (5)Carbide1"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.2090" (4)High-Speed Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2090" (4)Cobalt Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.2090" (4)Carbide1"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.2130" (3)High-Speed Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2130" (3)Cobalt Steel1 1/4"5"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.2130" (3)Carbide1"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.2210" (2)High-Speed Steel1 1/2"6"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2210" (2)Cobalt Steel1 1/2"6"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.2210" (2)Carbide1"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel00000000000000
    0.2280" (1)High-Speed Steel1 1/2"6"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2280" (1)Cobalt Steel1 1/2"6"6—0" to 0.0002"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
    0.2280" (1)Carbide1"3"4—0" to 0.0002"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000
     
    Spiral Flute
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers, Round Shank, Spiral Flute.
     
    Wire Gauge
    0.0400" (60)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0410" (59)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0420" (58)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0430" (57)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0465" (56)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0520" (55)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0550" (54)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0595" (53)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0635" (52)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0670" (51)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0700" (50)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0730" (49)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0785" (47)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0810" (46)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0820" (45)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0860" (44)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0890" (43)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0935" (42)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0960" (41)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0980" (40)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0995" (39)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1040" (37)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1100" (35)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1130" (33)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1160" (32)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1200" (31)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1285" (30)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1360" (29)High-Speed Steel1"4"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1440" (27)High-Speed Steel1"4"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1470" (26)High-Speed Steel1"4"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1520" (24)High-Speed Steel1"4"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1540" (23)High-Speed Steel1"4"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1570" (22)High-Speed Steel1"4"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1590" (21)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1610" (20)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1660" (19)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1695" (18)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1770" (16)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1800" (15)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1820" (14)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1850" (13)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1890" (12)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1910" (11)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1935" (10)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1960" (9)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1990" (8)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.2010" (7)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.2040" (6)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.2090" (4)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.2130" (3)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.2280" (1)High-Speed Steel1 1/2"6"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     

    Reamer Sets

    Keep a variety of reamer sizes on hand for finishing holes.
    Round Shank
    Image of Product. Front orientation. Reamers. Reamer Sets, Round Shank.
    These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Jobbers' Length—The same length as jobbers' drill bits, these reamers save setup time when you want to drill and ream on the same machine, such as a drill press or bench lathe.
    Sizes
    Included
    No. of
    Pieces
    Material
    Lg.
    Class
    Container
    Type
    For Use On
    Each
    Straight Flute
     
    Wire Gauge
    61-8020High-Speed Steel—Metal CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    1-6060High-Speed Steel—Metal CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000000
    1-6060High-Speed SteelJobbers
    		Metal CaseAluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
     

    Round-Shank Reamer Drill Bits

    Image of Product. Front orientation. Contains Annotated. Reamer Drill Bits. Round-Shank Reamer Drill Bits.
    Drill and finish holes in a single pass with these dual-purpose tools. The tapered tip gradually pierces your material to reduce friction, and the straight flutes make clean cuts without chipping or peeling the edge of the hole. Made from solid carbide, these reamer drill bits are strong and heat resistant. The flutes stay sharp even when cutting abrasive materials such as carbon fiber, fiberglass, and graphite. Use them in drill presses or other machines—carbide is brittle, and will break if used to drill by hand.
    Dia.
    Lg.
    Reamer
    Size
    Reamer
    Shank
    Max. Drilling
    Dp.
    Flute
    Overall
    No. of
    Flutes
    Flute
    Type
    Cutting Dia.
    Tolerance
    For Use On
    Each
    Carbide
     
    Wire Gauge
    400.0980"0.098"0.56"0.563"3"4Straight0" to 0.0005"Carbon Fiber, Fiberglass, Graphite0000000000000
    300.1285"0.128"0.75"0.75"3"4Straight0" to 0.0005"Carbon Fiber, Fiberglass, Graphite000000000000
    200.1610"0.161"0.94"0.938"3"4Straight0" to 0.0005"Carbon Fiber, Fiberglass, Graphite000000000000
    110.1910"0.191"1.88"1.875"4"4Straight0" to 0.0005"Carbon Fiber, Fiberglass, Graphite0000000000000
    100.1935"0.193"1.88"1.875"4"4Straight0" to 0.0005"Carbon Fiber, Fiberglass, Graphite0000000000000
    70.2010"0.201"2"2"4"4Straight0" to 0.0005"Carbon Fiber, Fiberglass, Graphite0000000000000
    20.2210"0.221"2.19"2.188"4"4Straight0" to 0.0005"Carbon Fiber, Fiberglass, Graphite0000000000000
    10.2280"0.228"2.25"2.25"4"4Straight0" to 0.0005"Carbon Fiber, Fiberglass, Graphite0000000000000
     
    back to top